Sun Microsystems IN3264 - Manuals

Page 2 - CE COMPLIANCE

Installation and Safety Instructions For Models without a Power Switch: The socket outlet shall be installed near the equipment and shall be accessible. For all Models: No serviceable parts inside the unit. Refer service to a qualified technician. For Models with Internal or External Fuses: For cont...

Page 3 - Product Overview; The IN3264 has four buffered outputs and one sharpness control.; FEATURES

1 ©1999 - INLINE, INC. IN3264 / IN3268 OPERATION MANUAL - REV 1.3 01/04/01 Product Overview The IN3264 / IN3268 is a high-resolution dedicated VGA distribution amplifier designed to amplify and split the VGA / SVGA / XGA signal from a single computer video card to four or eight data grade displays s...

Page 4 - INPUT / OUTPUT COMPATIBILITY; Installation; video output port on the computer.

2 IN3264 / IN3268 OPERATION MANUAL - REV. 1.3 01/04/01 ©1999 INLINE, INC. INPUT / OUTPUT COMPATIBILITY VGA / SVGA / XGA Compatibility - The unit features 15-pin HD VGA-type connectors for input and outputs. The units will directly connect to VGA video cards and display devices using the IN8000 Serie...

Page 5 - Default Settings; COIL

3 ©1999 - INLINE, INC. IN3264 / IN3268 OPERATION MANUAL - REV 1.3 01/04/01 5. Connect the round connector on the power supply to the POWER input jack (located on the back panel of the distribution amp, immediately adjacent to Output 4.) Connect the power adapter box side of the power supply to the A...

Page 6 - LED

4 IN3264 / IN3268 OPERATION MANUAL - REV. 1.3 01/04/01 ©1999 INLINE, INC. Opening the J2, J3 and J4 pins will remove the 75 ohm termination for each color. This setting allows users to connect a cable such as the IN9041 to the input and utilize a local monitor. Please note that if there is no local ...

Page 7 - IN3268 BOTTOM BOARD DEFAULT

5 ©1999 - INLINE, INC. IN3264 / IN3268 OPERATION MANUAL - REV 1.3 01/04/01 IN3268 BOTTOM BOARD DEFAULT LED COIL To allow a loop-output, the J2, J3 and J4 pins must be open on both the top and the bottom boards. Again, the outputs will be overdriven if there is no local monitor connected to the input...

Page 8 - Specifications

6 IN3264 / IN3268 OPERATION MANUAL - REV. 1.3 01/04/01 ©1999 INLINE, INC. Specifications IN3264 VGA Distribution Amplifier IN3268 VGA Distribution Amplifier Input Connector Type (1) 15-pin HD male connector (1) 15-pin HD male connector RGB Signals Analog video 1.5V p-p max. 75 ohm impedance Analog v...

Page 9 - Optional Accessories; Used as Input / Output Cables; ADDITIONAL VGA STEREO AND AUDIO DISTRIBUTION AMPLIFIER MODELS

7 ©1999 - INLINE, INC. IN3264 / IN3268 OPERATION MANUAL - REV 1.3 01/04/01 Optional Accessories Power Accessories IN9210 Rack Mountable Power Supply - Provides power for up to five 9VDC / 12VDC devices IN8500 Bulk Power Cable for IN9210: 18 gauge, 2-conductor power cable, bulk IN8512P Connects IN921...

Page 10 - Troubleshooting; The output image is missing a color.; in for a few minutes. If the adapter feels cool, replace it.

8 IN3264 / IN3268 OPERATION MANUAL - REV. 1.3 01/04/01 ©1999 INLINE, INC. Troubleshooting The display device connected to the IN3264 / IN3268 output has a bad / scrambled image. Solution 1: The display device connected to the output of the distribution amplifier may not be compatible with the comput...

Page 11 - Warranty

9 ©1999 - INLINE, INC. IN3264 / IN3268 OPERATION MANUAL - REV 1.3 01/04/01 Warranty • INLINE warrants the equipment it manufactures to be free from defects in materials and workmanship. • If equipment fails because of such defects and INLINE is notified within two (2) years from the date of shipment...