Sun Microsystems CP3000 - Manuals

vi Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010 C.4.1 EN 55022 Emissions C–4 C.4.2 EN 55024 Immunity C–4 C.5 Regulatory Information C–5 C.5.1 FCC (USA) C–5 C.5.2 Industry Canada (Canada) C–5 Index Index–1

vii Preface The Netra™ CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide describes the installation and configuration of the Sun Netra CP3000 AMC.1-HDD SAS disk. This guide also includes information about software,environment specifications, connectors, and certification...

viii Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010 Related Documentation The following table lists the documentation for the AMC.1-HDD SAS disk. Theonline documentation is available at: http://docs.sun.com/app/docs/prod/cp3000.pcie#hic Third-Pa...

Preface ix Sun Welcomes Your Comments Sun is interested in improving its documentation and welcomes your comments andsuggestions. You can submit your comments by going to: http://www.sun.com/hwdocs/feedback Please include the title and part number of your document with your feedback: Sun Netra CP300...

1-1 C H A P T E R 1 Getting Started This chapter provides information and procedures needed to install and make theSun Netra CP3000 AMC.1-HDD SAS disk operational. This chapter should be readbefore unpacking and installing the AMC. In addition to this chapter, refer to the following safety document:...

1-2 Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010 1.1 System Requirements The following sections briefly describe the minimum system requirements and theconfigurable features. Links are provided to other chapters and appendixescontaining more d...

Chapter 1 Getting Star ted 1-3 1.1.4 Electrical and Environmental See Appendix B for electrical and environmental requirements. Caution – None of the integrated chips junction temperature should exceed 125˚C. The AMC requires air flow to meet this requirement. Testing should be done in theshelf to f...

1-4 Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010 1.3 Handling AMCs Caution – The system is sensitive to static electricity. To prevent damage to the assembly, always connect an antistatic wrist strap between you and the system. Avoid touching ...

Chapter 1 Getting Star ted 1-5 ■ Do not use an oscilloscope probe on the components. The soldered pins are easilydamaged or shorted by the probe point. ■ Transport an AMC in an antistatic bag. 1.4 AMC Faceplate The following shows the faceplate of the Sun Netra CP3000 AMC.1-HDD SAS disk. FIGURE 1-1 ...

1-6 Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010 1.5 AMC LEDs The following tables give status information for all of the LEDs on the AMC. TABLE 1-1 describes the LEDs defined by ATCA to monitor board status. TABLE 1-2 describes in detail the ...

1-8 Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010 1.6 Removing and Installing AMCs This section describes how to remove and install AMCs. The AMC.1-HDD SAS disk can be installed into an ATCA shelf (chassis) with sitesthat support AMC.1 PCI Expr...

1-12 Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010 Caution – Failure to fill all slots with AMCs or cover with filler panels can negatively impact the cooling of the system. 1.6.2 Removing a Blade Server and AMC Following are the instructions f...

Chapter 1 Getting Star ted 1-13 Note – Depending on how the Shelf controls deactivation, the Shelf might not initiate deactivation when you disengage the ejector latch. If so, either configure theShelf to allow deactivation via latch opening or deactivate by other methods. 3. Disconnect all cables c...

1-18 Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010 Caution – Failure to fill all slots with AMCs or cover with filler panels can negatively impact the cooling of the system. 9. Power on the system, if necessary. Refer to your system manual for ...

2-2 Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010 2.1 Features Part of Sun’s ATCA platform, the Sun Netra CP3000 AMC.1-HDD SAS disk complieswith PICMG 3.0 AdvancedTCA Specification R2.0 ECN002 and the followingspecifications: ■ PICMG AMC.0 Rev....

Chapter 2 Overview 2-3 ■ Support for SATA, as defined in the Serial ATA Specification, version 1.0a. 2.2 Key Components The following figure and sections describe key components of the Sun Netra CP3000AMC.1-HDD SAS disk. FIGURE 2-1 Top-Level AMC Layout 2.2.1 Hard Drive Disk The Sun Netra CP3000 AMC....

Chapter 2 Overview 2-5 ■ e-Keying as described in the AMC.0 specification ■ FRU information ■ LED indicators for hot-swap and OOS (out of service) 2.2.6 Port Connectors The AMC includes connectors to communicate with the host board and take itsinterfaces outside the ATCA chassis. Refer to Appendix A...

Chapter 2 Overview 2-7 2.4 Functional Diagram FIGURE 2-3 AMC SAS-HDD Functional Block Diagram 2.5 Technical Support and Warranty If you have any technical questions or support issues that are not addressed in theSun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controllerdocumentation...

2-10 Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010 2.7 Disposal The AMC might contain materials that require regulation upon disposal. Pleasedispose of this product in accordance with local rules and regulations. For disposalor recycling inform...

3-1 C H A P T E R 3 Managing the AMC This chapter describes the AMC management software. The Sun Netra CP3000 AMC.1-HDD SAS disk includes an IPMI-based ModuleManagement Controller (MMC) that meets all requirements set out in the PICMGAMC.0 specification. The MMC allows detection of the module by the...

3-2 Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010 3.1 Monitoring and Control Functions The MMC is responsible for communicating module status information to the carrierboard, and also has some control at the module level. The 10GbE local PHY is...

3-4 Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010 3.3 FRU Information Board information such as serial number, date of manufacture, OEM name, partnumber, and so on is retrievable from the FRU EEPROM integrated into the MMC.FRU information store...

Chapter 3 Managing the AMC 3-5 3.4 Sensors The AMC.1-HDD SAS disk module management is connected to sensors monitoringkey board voltages and temperatures. Data records from the following sensors areaccessible using IPMI commands: ■ Hot-swap ■ +12V payload power ■ +3.3V management power ■ Board and i...

3-6 Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010 3.5 Firmware and Software Upgrades For up-to-date instructions on upgrading the firmware and software, refer to thefollowing documentation: ■ Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard D...

4-2 Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010 4.1 Configuration Tools The configuration tools are preloaded on a flash ROM device embedded on theAMC. A MicroTCA or host carrier CPU can read the code to facilitate booting fromSAS drives. The...

Chapter 4 Configuring the AMC 4-3 4.2.1 Features and Configurations The Boot BIOS supports the following: ■ Using multiple AMC.1 SAS modules ■ Applying global properties stored in flash ■ Selecting and configure up to 256 adapters ■ Automatic INT13 drive mapping for SAS drives ■ SAS topology discove...

Chapter 4 Configuring the AMC 4-5 FIGURE 4-2 Adapter Properties Menu 5. Using the arrow keys, select the item of interest. 6. Press ENTER to display the next screen. 4.3 OpenBoot BIOS For information about the OpenBoot BIOS, refer to the Sun Solaris OS and SPARCdocumentation. The documentation is av...

4-6 Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010 4.4 Extensible Firmware Interface (EFI)BIOS The AMC.1-HDD SAS disk includes an EFI boot services driver for use with ATCAblades that feature Intel® IA64 processors. Additional information is ava...

A-1 A P P E N D I X A Connectors and Ports This appendix describes the connectors and ports you can use to communicate withthe host board and application-specific devices. A brief description of each connectorand port is given, and a detailed description and pinout given for each connector. This app...

A-4 Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010 A.3 SAS Controller Ports The AMC.1-HDD SAS disk incorporates four dedicated SAS controller ports asfollows. These SAS ports are shipped with PHY’s disabled and are not driving AMC ports 2 and 3....

B-1 A P P E N D I X B Environment Specifications This appendix describes the electrical, environmental, and mechanical specifications.It includes illustrations of the board dimensions. This appendix contains the following topics: ■ Section B.1, “Electrical and Environmental” on page B-2 ■ Section B....

B-2 Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010 B.1 Electrical and Environmental The following sections provide tables and illustrations showing the electrical andenvironmental specifications. B.1.1 Electrical The AMC.1-HDD SAS disk shall con...

B-4 Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010 B.1.3 Absolute Maximum Ratings The following values are stress ratings only. Do not operate at these maximums. See Section B.1.4, “Normal Operating Ranges” on page B-4 for normal operating condi...

Appendix B Environment Specifications B-5 B.3 Mechanical This section includes the mechanical specifications for dimensions and weight. TheAMC.1-HDD SAS disk meets the PICMG 3.0 AdvancedTCA Specification R2.0ECN002 and AMC.0 R2.0 for all mechanical parameters. B.3.1 Board Dimensions and Weight The A...

C-1 A P P E N D I X C Agency Certifications This appendix lists standards agencies and the certifications related to the Sun NetraCP3000 AMC.1-HDD SAS disk. This product was tested in an EMC-compliant chassis and meets the requirementsfor EN55022 Class A equipment. Compliance was achieved under the ...

C-2 Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010 C.1 CE Certification The Sun Netra CP3000 AMC.1-HDD SAS disk meets the intent of Directive89/336/EEC for Electromagnetic Compatibility [EN55024:1998, EN55022:2006] andLow-Voltage Directive 73/23...

Appendix C Agency Cer tifications C-3 C.3 Safety ■ UL/cUL 60950--1 Safety for Information Technology Equipment (UL File#E138926) ■ EN/IEC 60950-1:2001, 1 ST ED CB/CCA –scheme, Safety for Information Technology Equipment (TUV CB certificate and report) The following group and/or national deviations w...

C-4 Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010 C.4 Emissions Test Regulations ■ FCC Part 15, Subpart B Class A Commercial Equipment ■ Industry Canada ICES-003:2004 Class A Commercial Equipment ■ CISPR 22/EN 55022:2006 Class A Radiated, Power...

Index-1 Index Numerics 10GbE local PHY, 3-2 A absolute maximum ratings, B-4AMC flexing, preventing, 1-4antistatic bag, 1-3 B board status, 1-6board voltages, monitoring, 2-4 C cable management bracket lowering, 1-12 cable management bracket, lowering, 1-12certification, C-2comments, about this book,...