Summit Appliance CR3240B - Manuals

4 Step #2 Check the Electrical Supply Requirements This product must be installed in accordance with national, state and local electric codes. The following table provides the correct voltage, amperage and frequency that must be supplied to the cooktop. SUMMIT Model # Maximum Connected Load Required...

5 Step #3 Countertop Preparation Please read this section prior to making cutout for the cooktop. It is important to plan ahead for installation of the cooktop, keeping the following dimensions in mind (please refer to Fig. 2). A. 13 inches maximum depth of overhead cabinets B. 36 inches is minimum ...

7 Summary of Cutout Dimensions Model Width Depth CR1115 11 ⅛ " 11 ⅞ " CR2110, CR2220 11 ⅛ " 19 ⅛ " CR3240 19 ⅞ " 18 ⅜ " NOTE: When making the countertop, radius the corner of the cutout (1/4” radius is typical). This will prevent cracking of the countertop. Follow manufacture...

8 Step #4 Installing the Cooktop 1. Strips of foam sealant have already been installed around the outer edge of the underside of the cooktop. This special sealant prevents liquid from infiltrating into the cabinet. Additionally, the mounted sealant helps prevent damage to the countertop if the cookt...

9 NOTE: BE CAREFUL NOT TO OVERTIGHTEN THE SCREWS. NOTE: Cooktop carrier brackets have already been installed on your cooktop. Fig. 7 Fig. 6 SELF-ADHESIVE SEALANT Fig. 8

10 Step #5 Electrical Connection Before proceeding further, verify that the power supply is disconnected. Verify that the appropriate electrical supply requirements have been met. Refer to the table on page 2 for appropriate electrical requirements. The cooktop is supplied with a 40-inch long condui...

11 SAFETY INSTRUCTIONS Read this section BEFORE operating the cooktop. This cooktop, like all appliances, has the potential to create safety problems through careless and improper use. Please observe all of the following safety precautions. • Proper Installation Be sure your appliance is properly in...

13 Operation READ S AFETY I NSTRUCTIONS BEFORE OPERATING YOUR APPLIANCE. The cooking surface areas of your glass ceramic cooktop are identified by permanent patterns in the cooktop. The appliance is easy to maintain and easy to clean. Keeping the cooktop at top performance levels can be achieved by ...

14 Controls & Indicators Each of the cooking area controls has an infinite selection of heat settings. The control settings begin at low and increase heat output by cycling the heating elements between OFF and full power as you turn the knob clockwise. The heating elements will stay at full powe...

15 ONE-YEAR LIMITED WARRANTY Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory-specified parts and repair labor to correct ...