Summit Appliance CR2B228T - Manuals

Page 2 - TABLE OF CONTENTS

2 TABLE OF CONTENTS Appliance Safety 3 Important Safeguards 3-5 Location of Parts 5 Technical Information 5 Installation of your Appliance 6-9 Before Using your Cooktop 6 Installation 6-8 Connecting the Cooktop to the Power Supply 8-9 Operating your Cooktop 10-12 Control Panel 10 Choosing the Proper...

Page 3 - APPLIANCE SAFETY; IMPORTANT SAFEGUARDS

3 APPLIANCE SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the Safety Alert Symbol. The symbol alerts you to potential hazards that can kill or inj...

Page 5 - LOCATION OF PARTS

5 temperature. • Utensil Handles Should Be Turned Inward and Not Extend Over Adjacent Surface Units – To reduce the risk of burns, ignition of flammable materials, and spillage due to unintentional contact with the utensil, the handle of a utensil should be positioned so that it is turned inward and...

Page 6 - INSTALLATION OF YOUR APPLIANCE; Before Using your New Cooktop; Installation

6 INSTALLATION OF YOUR APPLIANCE Before Using your New Cooktop • Carefully review this User Manual , taking special note of the 'Safety Warnings' section. • Remove any protective film that may still be on your cooktop. CAUTION: Please read this section prior to making the cut out for your cooktop. I...

Page 8 - Placing your Cooktop into the Cut Out; Connecting the Cooktop to the Power Supply

8 Placing your Cooktop into the Cut Out 1. Stretch out the supplied seal along the underside edge of the cooktop, ensuring the ends overlap at the corners. 2. Do not use an adhesive to fix the cooktop into the worktop. Once the seal is fitted, position the cooktop into the cutout in the worktop. App...

Page 10 - OPERATING YOUR COOKTOP; Control Panel; Choosing the Proper Cookware

10 OPERATING YOUR COOKTOP Control Panel • The controls respond to touch, so you don't need to apply any pressure. • Use the ball of your finger, not its tip, as show below: • You will hear a beep each time a touch is registered. • Make sure the controls are always clean, dry, and that there is no ob...

Page 11 - To Lock the Controls

11 Using your Cooktop 1. Place a pan on the cooking zone you wish to use. Make sure the cooking surface and the bottom of the pan are clean and dry. 2. Press and hold the ON/OFF key for two seconds. The cooktop will alert you with a single beep once it has powered on. The display will show “0” indic...

Page 12 - Special Functions; Over-heating Protection; Residual Heat Indicator; Auto-Shut Off Protection; Unintended Operation Protection

12 Special Functions Over-heating Protection A sensor monitors the temperature in the cooking zones. When the temperature exceeds a safe level, the cooking zone is automatically switched off. Residual Heat Indicator The cooktop will remain hot after use, especially if you have been using the cooktop...

Page 14 - LIMITED WARRANTY

14 LIMITED WARRANTY ONE-YEAR LIMITED WARRANTY Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory-specified parts and repair ...