Stiga 8218-2220-70 - Manuals

42 ENGLISH EN 5. Tighten the screw (V) until the gear lever remains in the gear positions in the panel plate. 6. Set down the machine on its wheels. 3.7 CHECKING THE CONTROL WIRES The control wires might need adjusting before using the snow thrower for the first time.See ADJUSTING THE CONTROL WIRES ...

43 ENGLISH EN 5 USING THE SNOW THROWER 5.1 GENERAL Never start the engine until all the above measures under ASSEMBLY have been carried out. Never use the snow thrower without first reading and understanding the instructions and all the warning and instruction stickers on the machine. Always use pro...

44 ENGLISH EN 5.8 AFTER USE 1. Check for loose or damaged parts. If required, change damaged parts. 2. Tighten loose screws and nuts.3. Brush all the snow from the machine.4. Move all the controls backwards and forwards a few times. 5. Put the choke in position 6. Disconnect the starting cable from ...

45 ENGLISH EN 7.2 ADJUSTING THE SCRAPER BLADE AND SHOES The scraper blade and shoes gets worn after a long term of use.Adjust the scraper blade (always together with the shoes) until desired distance to the ground.The scraper blade and the shoes are reversible and can be used on both sides.See “5.7”...

46 ENGLISH EN 4. Remove the object that has fastened in the auger.5. Align the holes in the shaft and auger.6. Remove the broken bolt parts.7. Assemble a new original shear bolt. 8 STORAGE Never store the snow thrower with petrol in the tank in a confined area with bad ventilation. Petrol fumes coul...