Stiebel Eltron DHCE8/50 - Manuals

STIEBEL ELTRON 6 Operation Instruction for the user and the qualified installer 3. Technical Data Type DHCE 6/50 DHCE 8/50 Norminal capacity l. 0.45 Design Close outlet Max. water pressure 1000 kPa Min. water pressure to activate unit 200 kPa Water connection G ½“ (External thread) (15mm) Dimension ...

STIEBEL ELTRON 7 Operation Instruction for the user and the qualified installer Guarantee Steel, copper, or plastic piping systems. If plastic piping systems are being used, the following instructions are to be respected. - Temperature : max 50 ˚C - Pressure : max 1000 kPa The unit must be connected...

9. Fault elimination for the user STIEBEL ELTRON 8 Fault elimination for the user Fault Cause Rectification No hot water despite water flow through the unit. - The water flow volume required for the unit to turn it on has not been reached. - Increase flow volume - Water flow too high - Reduce water ...

STIEBEL ELTRON 9 Installation Instruction for the qualified installer Description of the unit (Internal) 1 6 13 5 2 10 11 7 8 9 12 14 Fig. 2 Description of the unit (internal) 1. Upper mounting hole 2. Lower mounting hole 3. Depth for mounting screw (Fig. 6 No.3) 4. Distance of the connection cable ...

Fig. 3 Installation to a bath / sink. Fig. 4 Fig. 5 Dimension Cable 4 100 mm 200 mm 35 mm G1/2 G1/2 110 mm. 59 mm. 280 mm. 360 mm. 270 mm. 264 mm. 9 mm. 50 mm. 65 mm STIEBEL ELTRON 10 Installation Instruction for the qualified installer

Fig. 9 Fig. 11 Fig. 10 Fig. 12 (concealed connection) STIEBEL ELTRON 12 Installation Instruction for the qualified installer Installation Preparation before installation of the unit: - Before taking any action, always switch off the water heater’s main circuit breaker first. - Place a drilling guide...

A min. 46 max. 50 mm HW C B CW CW BA Fig. 17 Fig. 18 STIEBEL ELTRON 14 Installation Instruction for the qualified installer Connecting Water Pipes (concealed connection) Connecting the water heater to a wall-em-bedded water pipe: - Connect the nipple joints (Fig. 17/B) to the cold water inlet pipe a...

Stiebel Eltron Warranty for Water Heaters – Models DHCE Who gives the warranty 1. The warranty is given by Stiebel Eltron (Aust) Pty Ltd (A.B.N. 82 066 271 083) of 6 Prohasky Street, Port Melbourne, Victoria, 3207 (“we”, “us” or “our”). The warranty 2. This warranty applies to Stiebel Eltron Water H...

(c) connection to water from a bore, dam or swimming pool; (d) connection to an incorrect power supply; (e) connection to faulty equipment, such as damaged valves; (f) foreign matter in the water supply, such as sludge or sediment; (g) corrosive elements in the water supply; (h) accidental damage; (...