Stiebel Eltron DEM6SENSORTAP - Manuals

Page 2 - CoNTeNTs | speCIAL INforMATIoN; speCIAL INforMATIoN

www.stiebel-eltron.com WSH 10 | WSH 20 | 13 EN GL ISH CoNTeNTs | speCIAL INforMATIoN speCIAL INforMATIoN - The appliance may be used by children aged 8 and older and persons with reduced physical, sensory or mental capabilities or a lack of ex- perience and know-how, provided that they are supervi...

Page 3 - operATIoN; General information; Safety instructions; Other symbols in this documentation; Units of measurement

operATIoN General information 14 | WSH 10 | WSH 20 www.stiebel-eltron.com operATIoN 1. General information The chapters „Special information“ and „Operation“ are intended for both users and qualified contractors.The chapter „Installation“ is intended for qualified contractors. Note Read these inst...

Page 4 - Product description; Setting the temperature

operATIoN Product description www.stiebel-eltron.com WSH 10 | WSH 20 | 15 EN GL ISH 3. Product description Operation of the sensor tap is contactless. The water is turned on and off via a PCB with a proximity sensor. The PCB is supplied with power as follows: - WSH 10 via a power supply unit - WSH...

Page 5 - Standard settings

operATIoN Settings 16 | WSH 10 | WSH 20 www.stiebel-eltron.com Symbols Symbol Description Touch the touch area Move your finger away from the touch area The LED on the sensor flashes Water is running from the tap The water flow has been interrupted 4.3 Standard settings 4.3.1 Setting the water run...

Page 7 - Recalibrating the sensor

operATIoN Troubleshooting 18 | WSH 10 | WSH 20 www.stiebel-eltron.com 4.4.3 Hygiene flush 12/24/48 hours You can set a hygiene flush to take place 12, 24 or 48 hours after last use.The hygiene flush time corresponds to the setting for continuous draw-off (see chapter „Extended settings / Continuou...

Page 8 - Replacing the battery in the WSH 20 sensor tap; Supplement “Touch settings and

operATIoN Cleaning, care and maintenance www.stiebel-eltron.com WSH 10 | WSH 20 | 19 EN GL ISH 5.2 Replacing the battery in the WSH 20 sensor tap A B C 10 sec. D 2,5 2,5 D 00000 77 12 0 Note The sensor tap is powered by a lithium battery. Remove spent batteries. Leaking batteries cause damage whic...

Page 9 - INsTALLATIoN; General safety instructions; Product description; Standard delivery

INsTALLATIoN Safety 20 | WSH 10 | WSH 20 www.stiebel-eltron.com INsTALLATIoN 7. Safety Only qualified contractors should carry out installation, commis- sioning as well as maintenance and repair of the product. 7.1 General safety instructions We guarantee trouble-free function and operational reli...

Page 10 - Setting a fixed temperature

INsTALLATIoN Commissioning www.stiebel-eltron.com WSH 10 | WSH 20 | 21 EN GL ISH D 00000 77 12 9 f f Install the strainer and gaskets (the tee is not included in the standard delivery). Strainers are self-sealing. Only WSH 10: D 00000 77 13 3 f f Connect the sensor tap to the power supply unit. Co...

Page 11 - NOTIZEN

www.stiebel-eltron.com WSH 10 | WSH 20 | 43 N ED ER LA N D S NOTIZEN