Page 3 - Table of Contents
Instruction Manual i Table of Contents Introduction ............................................................................................ 1 Packaging Contents ................................................................................................................................. 1 In...
Page 4 - Introduction; Packaging Contents; Installation; Hardware Installation
Instruction Manual 1 Introduction Packaging Contents • 1U LCD Rack Console Drawer• VGA cable• USB cable• Mounting Rails - Set• Power Adapter• Power Cord Installation Hardware Installation Hardware Kit Contents • Please check that all packaging contents are present before installation. Make sure that...
Page 5 - Mounting the console
Instruction Manual 2 Mounting the console 1. Adjust the sliding rail until the screw underneath is visible. Loosen (do not release) the two rear screws then adjust the rear bracket to fit the depth of your rack: 2. Install the rail into the rack by attaching them to the front/rear posts using the ap...
Page 7 - How to Use; Connecting the Console
Instruction Manual 4 How to Use Connecting the Console To connect the LCD console to a computer, perform the following steps:1. Turn off your computer.2. Connect the VGA video cable from the VGA output on the computer system to the VGA port on the rear of the rack console. 3. Identify and connect th...
Page 8 - Testing the Console
Instruction Manual 5 Each video card has several controls that allow you to adjust the display settings, however, the software and driver for each video card is unique. In most cases, you can adjust these settings using a program or utility provided by the manufacturer of the video card. Most video ...
Page 9 - Panel Controls and OSD Functions; Auto tune; Brightness
Instruction Manual 6 Panel Controls and OSD Functions The following controls are located on the left side of the the console monitor: Controls Descriptions Soft power on/off. Adjacent LED is lit when on. Auto Auto-synchronize and scale down display to any valid factory preset timings. Up Press to sc...
Page 10 - Color
Instruction Manual 7 Color 1. Press the Menu button.2. Use the Down and Up button to scroll.3. Highlight Color, and press the Menu button to enter, which will launch the following screen: Icon Description 9300°K To set CIE coordinates at 9300°K color 7500°K To set CIE coordinates at 7500°K color 650...
Page 11 - Language; Power Indicator
Instruction Manual 8 Language 1. Press the Menu button.2. Use the Down and Up buttons to scroll.3. Highlight Language, and press the Menu button to select, which will launch the following screen: 4. Use the Down and Up buttons to scroll, and highlight the preferred language.5. Press the Menu button ...
Page 12 - Specifications
Instruction Manual 9 Specifications RACKCONV1701RKCONV1701 xx RACKCONV1901 Display Size 17” 19” Panel Type Active Matrix TFT LCD ResolutionCapabilities 1280x1024 @ 60Hz (max.) Back Light four lamps SupportedColors 16.7M Colors (6-bit with FRC) Response Time Rising Time: 2ms Decay Time: 14ms Rising T...
Page 14 - Dimensions
Instruction Manual 11 RACKCONV1701 Dimensions RACKCONV1901 Dimensions
Page 15 - Technical Support
Instruction Manual 12 Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation...