Page 2 - YEARS; PLEASE CONTACT CUSTOMER SERVICE; CONTENTS
2 3 Section Page Contents 2 Suggested Applications 2 2 Years Warranty / Serial Number 2 Specifications 3 Introduction 4 Express Warranty Statement 4 Complete Warranty Statement 5 Important Safety Instructions 6 - 8 Section Page Description & Components 9 Unpacking 10 Assembly 10 – 12 Operation 1...
Page 3 - THANK YOU FOR BUYING A STANLEY; SPECIFICATIONS
2 3 OWNER’S OPERATING MANUAL PETROL LINE TRIMMER STRAIGHT SHAFT 4 STROKE 26CC MODEL NO. SXPG42602 THANK YOU FOR BUYING A STANLEY 4 STROKE PETROL LINE TRIMMER Your new Petrol Line Trimmer has been engineered and manufactured to STANLEY’s high standard of dependability, ease of operation and operator ...
Page 4 - INTRODUCTION; CUSTOMER SERVICE
4 5 Dear Customer,Thank you for purchasing this Line Trimmer which has passed through our extensive quality assurance processes. Every care has been taken to ensure that it reaches you in perfect condition. However, in the unlikely event that you should experience a problem, or if you require any as...
Page 5 - COMPLETE WARRANTY STATEMENT - LINE TRIMMER
4 5 As soon as you have purchased the Line Trimmer, we recommend that you check to make sure it is intact and that you read the operating instructions carefully before using it. The purchase receipt for this product is to be retained and must be presented if making a claim under the terms of the Sma...
Page 6 - IMPORTANT SAFETY INSTRUCTIONS
6 7 The purpose of safety rules is to attract your attention to possible dangers. The safety symbols and the explanations with them, require your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instruction or warnings they give are not substitu...
Page 8 - RESIDUAL RISKS; WARNING
8 9 Be careful not to drop the unit or hit it against obstacles.Before proceeding to adjust or repair the unit, be sure to stop the engine and detach the spark plug.When the machine is placed in storage for a long time, drain fuel/oil from the fuel/oil tank and carburettor, clean the parts, move the...
Page 9 - DESCRIPTION; DESCRI TION
8 9 1. Fuel tank cap2. Primer button3. Air filter with choke button4. Spark plug5. Muffler6. Oil tank cap7. Starter handle8. Cutting line spool 9. Cutting head shield10. Knob for drive shaft connection11. Front handle12. Rear handle13. Harness hook14. Choke button15. Harness DESCRIPTION DESCRI TION ...
Page 10 - INSTALLING THE CUTTING LINE SPOOL; UNPACKING
10 11 CAUTION. This packaging contains sharp objects. Take care when unpacking. Remove the machine, together with the accessories supplied, from the packaging. Check carefully to ensure that the machine is in good condition and account for all the accessories listed in this manual. Also make sure th...
Page 11 - ASSEMBLY
10 11 INSTALLING THE CUTTING HEAD SHIELD WARNING. The line cut-off blade on the cutting head shield is sharp. Avoid connection with the blade. Failure to avoid contact can result in serious personal injury. 1. Locate the bolt, nut and washer used to fix the cutting head shield. 2. Align the screw ho...
Page 12 - TO ADD ENGINE OIL: INITIAL USE
12 13 INSTALLING THE HARNESS Connect the latch on the shoulder harness to the strap hanger, Fig 7. Adjust the strap to a comfortable position, Fig. 8. WARNING. Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict seri...
Page 13 - OPERATION
12 13 TO CHECK ENGINE LEVEL BEFORE EACH USE 1. Separate the attachment from the power head. 2. Set power head on a flat level surface with shaft parallel to surface. 3. Unscrew the oil cap and remove. 4. Lubricant level should fall within the top of oil fill hole (the top of screw thread). 5. If lev...
Page 15 - TIPS FOR TRIMMING; CLEANING AND CARE; MAINTENANCE
14 15 TIPS FOR TRIMMING Avoid hot surfaces by always keeping the product away from your body. Cut all grass from top to down. This will prevent grass from wrapping around the shaft housing and string head which could cause damage from overheating. If grass becomes wrapped around the string head, STO...
Page 16 - ENGINE OIL REPLACEMENT
16 17 MAINTENANCE ENGINE OIL REPLACEMENT WARNING. Old engine oil is considered special waste and has to be disposed of according to your local environment protection regulation. Do not pour the oil into a garbage can, sewer, soil etc. 1. The engine oil replacement is easier if engine is warm (NOT HO...
Page 17 - REPLACING THE CUTTING LINE SPOOL
16 17 MAINTENANCE REPLACING THE CUTTING LINE SPOOL 1. Open the cutting line spool by pressing two release buttons on the side and take out the winding core (Fig.14 & 15). 2. Divide a spare cutting line in 2 equal halves, fix it in the winding core and start to wind the cutting line in two separa...
Page 20 - For any queries or assistance call; Customer Service; Keep your purchase receipt, this will be required to
For any queries or assistance call Customer Service AUST. 1300 660 457 NZ 0800 474 876 www.stanleyproducts.com.au Hours of operation: Monday to Friday 8.00am - 5.00pm AEST Do not return to place of purchase. Keep your purchase receipt, this will be required to make any claims under the 2 year warran...
