Speed Queen AWN43RSN116TW01 - Manuals

Operation Before Washing Prepare Wash Load Empty Pockets and Cuffs Make sure all pockets are empty and turn them inside out.One bobby pin, metal or plastic toy, nail or sharp object in aload can catch laundry, cause tears and plug the pump. Facialtissue left in a pocket will produce extreme “lint”. ...

• Items should move freely through the wash water for best cleaning results. • When washing very large items, do not fill washtub as full as with other loads. Load Size - Auto Fill Water Levels • This washer has an Auto Fill feature. It will automatically se- lect the proper water level for the load...

Wash Temperature Hot Hot water is the most effective for cleaning, but it is not recom-mended for all fabric types (read labels). Warm The Warm Wash is useful for providing a thorough cleaning onlight and moderately soiled clothing without damaging fabricor adding to color fading. Warm water also re...

Operating Your Washer TLW2374N_SVG LOAD SIZE HEAVY SOIL START/PAUSE STATUS CYCLE SELECTION Hold 3 seconds to cancel LARGE HEAVY DUTY DELICATE SPIN ONLY WASH NORMAL ECO HANDWASH PERM PRESS SMALL AUTO FILL EXTRA RINSE AUTO FILL WASH TEMPERATURE WARM COOL HOT COLD RINSE SPIN LID LOCK Determine Proper C...

NOTE: Auto Fill works in multiple stages. During thefirst fill step of the cycle, water will fill to the minimumlevel programmed for the specific cycle selected. Oncethe wash step begins, the control starts sensing theload. Once sensing is complete more water may beadded to optimize wash results. Th...

TLW2324N_SVG WARNING To reduce the risk of serious injury, do not by-pass the lid switch or lid lock to permit the wash-er to agitate or spin with the lid open. W939 5. Set the WASH TEMPERATURE control. (All rinses are cold.)6. Set the LOAD SIZE (water level) control, AUTO FILL, or AUTO FILL/EXTRA R...

Common Washer Sounds Sounds Cause Pump turning on and off dur-ing spin part of cycle The pump will turn off and onseveral times during the finalspin cycle. Washer speeding up duringwash part of cycle Depending on the cycle, thewash routine will either pickup speed or slow down. Clicking toward the b...

Clothing Care Clothing Concerns To keep clothes looking white or bright, use good washingpractices at all times to prevent a gradual build-up of soil orwater hardness minerals on them. If you notice that your clothes are not as bright as they should be, take correctivemeasures immediately. Problem C...

Maintenance Cold Weather Care If the unit is delivered on a cold day (below freezing), or is stor-ed in an unheated room or area during the cold months, donot attempt to operate the washer until it has had a chance towarm up. Water from the previous cycle may remain. Winterizing the Washer Follow th...

Preventative Maintenance Follow these guidelines to ensure the washer operates proper-ly. Call for service if you observe any of the following: water ofany amount on the floor, an increase in operating noise or wa-ter remaining in the wash basket after a cycle. Frequency Maintenance Proce-dure Month...

Troubleshooting Try these troubleshooting tips before making a service call.They may save you time and money. Washer Symptom Possible Cause/Solution Won't Fill • Make sure power cord is plugged all the way into the electrical outlet.• Make sure hot and cold water faucets are turned on.• Make sure li...

Washer Symptom Possible Cause/Solution WASH, RINSE STATUS lights flash 3times Suds Lock Error • This code will be displayed after a cycle until the lid is opened or the Start/Pause button is pressed. It indicates an oversudsing condition. • Laundry load may be oversudsing. Make sure you are using lo...

Warranty Repairs If something should occur with your washer or that requiresservice please use the service locator at www.speed-queen.com. We would like to point out items that would not be considereda product failure and are not covered under warranty. If a serv-ice technician is called for the ite...

NOTE: Water supply faucets should be readily accessi-ble to permit turning them off when washer is not beingused. Recommended cold water temperature is 50° to 75° Fahrenheit[10° to 24° Celsius]. Recommended maximum hot water temper-ature is 125° Fahrenheit [51° Celsius]. Warm water is a mixtureof ho...

NOTE: Machine will not drain if standpipe is higherthan 8 feet [2438 mm]. 2. Place the drain hose into the standpipe. IMPORTANT: To prevent siphoning, do not placeany ribbed portion of the drain hose into the stand-pipe. 3. Remove the beaded strap from accessories bag and place around standpipe and ...

Laundry Tub Installation For this type of installation, the drain hose MUST be secured tothe stationary tub to prevent hose from disloding during use. Usethe beaded strap (supplied in accessories bag) to secure hose. TLW2284N_SVG 1 1. Beaded Strap (tape if necessary) Figure 8 Position and Level the ...

Plug In the Washer Electrical Requirements 120 Volt, 60 Hertz with 3-Prong Earth/Ground Plug NOTE: The wiring diagram is located in the controlhood. WARNING To reduce the risk of fire, electric shock, serious in-jury or death, all wiring and protective earth/groundconnections MUST conform with the l...

led and connected to a protective earth/ground in accordance withall local codes and ordinances. WARNING Improper connection of the equipment earth/groundconductor can result in a risk of electric shock.Check with a qualified electrician or service person ifyou are in doubt as to whether the unit is...

Installer Checklist Fast Track for Installing the Washer 1 Remove the ShippingBrace and ShippingPlug. TLW2280N_SVG1 5 Position and Level theWasher. TLW2201N_SVG CHECK CHECK 2 Wipe Out Inside ofWashtub. TLW2281N_SVG1 6 Plug In the Washer. TLW2289N_SVG CHECK CHECK 3 Connect Fill Hoses. TLW1988N_SVG HO...