Speed Queen AFNE9RSP115TW13 - Manuals

Page 3 - Table of Contents; Washer Dimensions

Table of Contents Washer Dimensions ................................................................................ 4 Installation ............................................................................................. 5 Before You Start ..........................................................

Page 4 - Figure 1

Washer Dimensions Figure 1 A 24.06 in. [611 mm] B 23.19 in. [589 mm] C (to controls) Electronic Control: 41.25 in. [1048 mm] Knob Control: 40.75 [1035 mm] D 42.75 in. [1086 mm] E 32 in. [813 mm] F 36 in. [914 mm] G * 14.6 in. [371 mm] H 26.875 in. [683 mm] I 2.04 in. [52 mm] J 27.73 in. [704 mm] K (...

Page 5 - Before You Start; Tools; Figure 2; Parts Included; Connecting Hoses; Order of Installation Steps; Position Unit Near Installation Area

Installation Before You Start Tools For most installations, the basic tools you will need are: 9/1 6" FLW2376N_SVG 5 6 7 8 4 3 2 1 1. Safety Glasses 2. Wood Block 3. Wrench 4. Screwdriver 5. Pliers 6. Socket Wrench 7. Gloves 8. Level Figure 2 NOTE: If the washer is delivered on a cold day (below...

Page 6 - Remove Shipping Materials; Remove two screws at bottom of front access panel. Rotate

NOTE: For best performance and to minimize vibrationor movement, install washer on a solid, sturdy and lev-el floor. Some floors may need to be reinforced, espe-cially on a second floor or over a basement. Do not in-stall the washer on carpeting, soft tile or other weaklysupported structures. Remove...

Page 7 - Connect Fill Hoses; Water Supply Requirements; WARNING

FLW2297N_SVG1 Figure 5 6. Insert two plugs included in accessories bag into rear shipping bolt holes. FLW2358N_SVG Figure 6 7. Replace front access panel.8. Save all shipping materials. They must be reinstalled any time washer is moved more than four feet. IMPORTANT: Do not lift or transport unit fr...

Page 8 - Figure 7; Connect Drain Hose to Drain; Drain Flow Rate; Standpipe Installation; Figure 8; Wall Installation; Figure 9

IMPORTANT: DO NOT cross thread or overtightencouplings. This will cause them to leak. 6. Turn water on and check for leaks.7. If leaks are found, retighten the hose couplings.8. Continue tightening and rechecking until no leaks are found. COLD HOT FLW2449N_SVG 8 7 6 5 4 3 2 1 1. Filter Screen (Scree...

Page 9 - Laundry Tub Installation; Position and Level the Washer

NOTE: End of drain hose must not be below 24 in. [610mm]. H023i_SVG 1 3 2 1. Drain Hose 2. Beaded Strap (tape if necessary) 3. Fill Hoses Figure 9 Laundry Tub Installation For this type of installation, the drain hose MUST be secured tothe stationary tub to prevent hose from disloding during use. Re...

Page 10 - Electrical Requirements

1. Leveling Leg 2. Washer Base 3. Level 4. Wood Block 5. Locknut 6. Rubber Foot Figure 11 Wipe Out Inside of Wash Drum Prior to first wash, use an all purpose cleaner or a detergentand water solution and a damp cloth to remove shipping dustfrom inside of the washer. Figure 12 Plug In the Washer Elec...

Page 11 - Earth/Ground Instructions; Check Installation

Standard 120 Volt, 60 Hertz 3-Wire Effective Earth/Ground Circuit TLW2287N_SVG 6 8 7 2 1 3 5 4 1. L1 2. Earth/Ground 3. Neutral Side 4. Round Earth/Ground Prong 5. Neutral 6. 0 V.A.C. 7. 120 ± 12 V.A.C. 8. 120 ± 12 V.A.C. Figure 13 WARNING To reduce the risk of an electric shock or fire, DONOT use a...

Page 12 - Fast Track for Installing the Washer; Refer to the manual for more detailed information

Installer Checklist Fast Track for Installing the Washer 1 Position Washer Near Installation Area. 5 Position and Level theWasher. CHECK CHECK 2 Remove the ShippingMaterials and InstallPlugs. FLW2455N_SVG 6 Wipe Out Inside ofWasher. CHECK CHECK 3 Connect Fill Hoses. FLW2304N_SVG COLD HOT 7 Plug In t...

Speed Queen AFNE9RSP115TW13 - Manuals

Manuals:

User Manual Speed Queen AFNE9RSP115TW13

Installation Manual Speed Queen AFNE9RSP115TW13

Summary

Speed Queen Manuals