Speed Queen ADG3TRBLACKNG - Manuals

Page 3 - WARNING; WARNING

Front Matter WARNING The maximum washing load (dry weight) shall not exceed 20 pounds[9.0 kg]. Read complete Installation and Operation instructions be- fore using unit. WARNING FOR YOUR SAFETY, the information in this manual must be followed to minimize the risk of fire or explo- sion or to prevent...

Page 4 - Table of Contents

Table of Contents Safety Information ............................................................................. 5 Explanation of Safety Messages ................................................................. 5 Important Safety Instructions .........................................................

Page 5 - Explanation of Safety Messages; DANGER; Important Safety Instructions

Safety Information Explanation of Safety Messages Precautionary statements (“DANGER,” “WARNING,” and “CAU-TION”), followed by specific instructions, are found in this manualand on machine decals. These precautions are intended for the per-sonal safety of the operator, user, servicer, and those maint...

Page 7 - Energy Saving Tips; Sort

Before Drying Energy Saving Tips • Make sure the lint filter is always clean.• Do not overload the dryer.• Do not overdry items.• Remove items to be ironed while still damp.• Large loads of similar fabrics dry the most efficiently. However, dry permanent press in smaller loads to prevent wrinkling. ...

Page 15 - Available Drying Cycles; Automatic Regular/Delicate Cycle; To Dry Clothes

Operating Your Dryer WARNING To reduce the risk of fire, electric shock, serious injury or death to persons, read the Safety Information sec- tion before operating the dryer. W520 Available Drying Cycles NOTE: Use the automatic cycles for drying items that can be dried wih heat. These cycles automat...

Page 16 - End of Cycle Signal

DRY2757N_SVG 1 1. Lint Filter Figure 1 3. Close loading door. Dryer will not operate with the door open. DRY2026N_SVG 4. Select Fabric Selector. Follow garment manufacturer's care la- bels for recommended temperature settings. DRY2329N_SVG 5. Select timer setting in cycle desired. These cycles contr...

Page 18 - Lubrication; Dryer Interior; Exhaust System; Motor Overload Protector

Maintenance Lubrication All moving parts are sealed in a permanent supply of lubricant orare equipped with oilless bearings. Additional lubrication will not benecessary. Care of Your Dryer WARNING To reduce the risk of an electric shock, serious injury or death, disconnect the electrical service to ...

Page 19 - Lint Filter

Lint Filter The lint filter is located at the front of the dryer in the lower part ofthe door opening. CLEAN THE LINT FILTER BEFORE DRYING EACH LOAD. Annually remove lint filter and screw to vacuum the duct under it. DRY2757N_SVG 1 1. Lint Filter Figure 2 Maintenance © Copyright, Alliance Laundry Sy...

Page 22 - Contact Information

Contact Information If service is required, contact the nearest Factory AuthorizedService Center. If you are unable to locate an authorized service center or are unsa-tisfied with the service performed on your dryer, contact: Alliance Laundry SystemsShepard StreetP.O. Box 990Ripon, WI 54971-0990U.S....