SpectraLink ROLM PBX - Manuals

SpectraLink Corporation LinkPlus Interface Guide Siemens ROLM PBX System 2. Plan the Interface The system administrator programs the telephone system for use with the Wireless Telephone System using the normal administration terminal or procedures. Programming can be done after the handsets are regi...

SpectraLink Corporation LinkPlus Interface Guide Siemens ROLM PBX System Message waiting Does voicemail turn on a message waiting light for this handset? Class of Service To which Class of Service should handsets be assigned? Extension Routing Where is this handset forwarded on busy/no answer? Picku...

SpectraLink Corporation LinkPlus Interface Guide Siemens ROLM PBX System 2.3 The SpectraLink Wireless Telephone Display The Link Wireless Telephone has a two-line, 16-character alphanumeric display. Certain characters may be used by the system that are not implemented in the handset. Flashing charac...

SpectraLink Corporation LinkPlus Interface Guide Siemens ROLM PBX System 2.4 Feature Programming Requirements Line Sequences The handset uses two types of key sequences to access PBX features and multiple lines. Line sequences are those where the user presses the LINE button and then a number button...

SpectraLink Corporation LinkPlus Interface Guide Siemens ROLM PBX System Voicemail The message-waiting icon ( MSG ) on the handset is activated with the message indication of the deskset. The voicemail feature on the deskset must be assigned to the feature key as shown in the Key-map Diagrams. Do no...

SpectraLink Corporation LinkPlus Interface Guide Siemens ROLM PBX System 3. Interface Implementation This section describes the recommended programming to use the Wireless Telephone System with Siemens Rolm systems. The procedures assume: • The Rolm 8000, 9000, 9200, 9751, or 9006, or a Siemens Hico...

SpectraLink Corporation LinkPlus Interface Guide Siemens ROLM PBX System 3.2 Key-mapping the Handset to Emulate ROLMPhone 400 Functionality LINE + 9 LINE + 8 LINE + 7 LINE + 6 LINE + 5 LINE + 4 LINE + 3 LINE + 2 LINE + 1 HOLD FCN + 3 START FCN + 1 FCN + 4 FCN + 8 MSG FCN + * FCN + 7 FCN + # FCN + 9 ...

SpectraLink Corporation LinkPlus Interface Guide Siemens ROLM PBX System 3.3 Program Rolm Each handset must be programmed so the Rolm switch will recognize the handset and allow access to system facilities and features. The Rolm technician or local system programmer should perform the necessary prog...

SpectraLink Corporation LinkPlus Interface Guide Siemens ROLM PBX System Set Up the handset • For each handset, set up a ROLMPhone defined as RP_400. • Associate this RP with the template table as displayed. • Assign extensions (trunks and lines) to buttons as determined in planning process. Assign ...