SpectraLink 150 M3 MCU - Manuals

Page 2 - NOTICE

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page ii NOTICE SpectraLink Corporation has prepared this document for use by SpectraLink personnel and clients. The drawings and specifications contained herein are the property of SpectraLink and shall b...

Page 3 - Note concerning the Master Control Unit:

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page iii Note concerning the Master Control Unit: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are de...

Page 4 - UL Information; Never install telephone wiring during a lightning storm.

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page i v UL Information This symbol on the nameplate means the product is listed by Underwriter’s Laboratories, Inc. It is designed and manufactured to meet rigid U.L. safety standards against X-radiation...

Page 5 - FCC Information

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page v FCC Information The Master Control Unit Complies with Part 68, FCC Rules FCC Registration Numbers: Link 150: IYGUSA -33400-P X- E Ringer Equivalence: Link 150 Model 3: 0.3B SpectraLink Corporation ...

Page 6 - Warranty and Repair Service Center:

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page vi Industry Canada (IC) Notice Notice: The Industry Canada (IC) label identifies certified equipment. This cert ification means that the equipment meets telecommunications network protective, operati...

Page 7 - Warranty Support Program; World-class support for your Wireless Telephone System

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page vii Warranty Support Program World-class support for your Wireless Telephone System Service Overview The SpectraLink Warranty Support Program provides predictable no cost factory repair and telephone...

Page 9 - Cleaning Tips for Wireless Telephones; Do not use lanolin, aloe, glycer in or other skin care type products.

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page ix Cleaning Tips for Wireless Telephones Wireless Telephones may occasio nally need to be cleaned to maintain appearance. Generally, wiping the handset surface with a clean, water-dampened cloth or p...

Page 10 - Table of Contents

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page x Table of Contents 1. ABOUT THIS DOCUMENT 1 1.1 Questions? 1 1.2 Icons and Conventions 1 1.3 Installation Overview 1 2. LINK WIRELESS T ELEPHONE SYSTEM OVERVIEW 3 2.1 System Operation 3 2.2 The Fron...

Page 12 - About This Document; Icons and Conventions; NORM; Installation Overview

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 1 1. About This Document This document explains installation and operation of SpectraLink’s Link Wireless Telephone System (WTS), using the Link 150 Model 3 (M3) Master Control Unit (MCU). The Link 1...

Page 14 - Link Wireless Telephone System; System Operation; The Link Wireless Telephone System; – serves as the connecting point, or gateway, between

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 3 2. Link Wireless Telephone System Overview Review this section if you are unfamiliar with the features and operation of the Link Wireless Telephone System. 2.1 System Operation The Link Wireless Te...

Page 15 - – act as a radio transceiver to provide the communications signal; – communicate with the Base Station using digital

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 4 The MCU supports four Base Stations and up to 16 Wireless Telephones. Up to four Link 150 M3 MCUs can be linked together for extended coverage area. Chained MCUs support up to 64 Wireless Telephone...

Page 16 - The Front Panel of the Link 150 M3 MCU

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 5 2.2 The Front Panel of the Link 150 M3 MCU The MCU's front panel contains the connections to the telephone system, switches to control system administration, and status LEDs. 1. STEP Button – Selec...

Page 17 - Site Preparation; Required Materials; Determine Location of MCU

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 6 3. Site Preparation 3.1 Required Materials The following equipment must be provided by the customer. 1. Outlet Strip – Recommended for installations with more than one MCU. This will allow the MCUs...

Page 18 - Run Cable for System; Run Cables to Base Station Locations; Wire Specifications

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 7 4. Run Cable for System 4.1 Run Cables to Base Station Locations The Base Station locations should be designated on the building floor plans provided to the installer. Base Stations can be mounted ...

Page 19 - Terminate Cable at Base Station Locations; RJ-45 Modular Cable

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 8 4.2 Pull Cable Pull the cable from the MCU location (usually in the telephone equipment room) to the Base Station locations designated on the floor plans. If the cabling exits the building, consult...

Page 20 - When wiring the 8-pin connector, use the following table as a guide.; Prepare Demarc Blocks

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 9 When wiring the 8-pin connector, use the following table as a guide. 8-pin modular connector MCU Pin Function Polarity 1 Data 1 Any 2 Data 2 Any 3 Power 3 + 4 Power 2 - 5 Power 2 + 6 Power 3 - 7 Po...

Page 21 - The diagrams which follow provide an overview of the connections.; Multiple Power Pairs

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 1 0 Based on the number and type of interfaces in the system, determine the number of 25-pair cables required to connect line ports and Base Stations to the demarcation blocks. The diagrams which fol...

Page 22 - Two Wire Analog or Digital Interface; Two Wire Analog or Digital Connection

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 1 1 Two Wire Analog or Digital Interface The wiring diagram below shows the connections required for a two-wire analog or digital interface. Two Wire Analog or Digital Connection

Page 23 - Four Wire Digital Interface; Four Wire Digital Connection

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 1 2 Four Wire Digital Interface The wiring diagram below shows the connections required for a four -wire interface . Each MCU of this typ e requires two demarcation blocks which will be wired as indi...

Page 24 - Install Demarc Blocks; LinkPlus Digital Integration Guide

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 1 3 4.5 Install Demarc Blocks The demarcation blocks used to connect the telephone system and Base Stations to the MCU should be installed on a typical telephone facility backboard. A ½ " or ¾ &#...

Page 25 - Connect Cables from Base Stations and Phone

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 1 4 4.7 Connect Cables from Base Stations and Phone Lines to Demarc Blocks Two-pair twisted cable from Base Stations installed throughout the facility converge at the demarc block or backboard. Eac h...

Page 26 - Two Wire Analog or Digital Demarc Block

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 1 5 Two Wire Analog or Digital Demarc Block The demarc block for the two -wire analog or digital interface should be wired as follows.

Page 27 - Four Wire Digital Demarc Block

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 1 6 Four Wire Digital Demarc Block The four wire digital interface (future release) requires two demarc blocks, one to Connector A a nd one to Connector B on the MCU. They should be wired as follows....

Page 29 - Install Link Wireless Telephone System; Check Components

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 1 8 5. Install Link Wireless Telephone System 5.1 Survey Site Check the site to be sure pre- installation work has been completed correctly. This includes: • Location chosen for the MCU is adequate, ...

Page 30 - Mount MCUs to Wall

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 1 9 • Link Wireless Telephone s – The correct number of Wireless Telephones for this installation. • Battery Chargers – SpectraLink Wireless Telephones require a battery charging system, usually one ...

Page 31 - Connect Multi-Unit Systems; Use the following procedure to connect; Multi-Unit Link 150 MCUs; Connect Power

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 2 0 Connect Multi-Unit Systems Use the following procedure to connect multiple MCUs. 1. Mount the MCUs side by side. 2. Connect the IPC cable from the OUT Port of the first unit to the IN Port of the...

Page 32 - Set Switch Interface Type

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 2 1 Use only the provided Class II AC Adapter with output 24VDC, 1A. ! ! For installations with more than one MCU, use an outlet strip with a built in power switch. This allows the MCUs to be turned ...

Page 33 - Move the Mode Switch back to; Troubleshoot Error Codes

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 2 2 Switch Interface Line LEDs MCU Type Notes Analog 1 SCA The SCA will only support Analog Comdial 3 SCU DEFINITY - 2 wire 1,4 SCU DEFINITY - 4 wire 1,5 SCF Executone 2,5 SCB Fujitsu 2,4 SCU Inter- ...

Page 34 - Install Base Stations; Mount Base Stations on Dropped Tile Ceilings; rotating it into position until it snaps into the locked position.

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 2 3 5.4 Install Base Stations Be sure the Base Station is positioned clear of anything that might damage it. The Base Station should be well above head height, away from doors and other objects that ...

Page 35 - Mount Base Stations On Finished Ceilings

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 2 4 Mount Base Stations On Finished Ceilings If your site does not have a dropped tile ceiling, the Base Station can be mounted to a finished ceiling or wall with a 4-5" long 1/4" –20 TPI pla...

Page 36 - Install Outdoor Base Stations; Only RCO Base Stations can be used outdoors.; Wire and Connect Outdoor Base Stations; indoor Base Stations.

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 2 5 5.5 Install Outdoor Base Stations Outdoor Base Stations are equipped with a protective enclosure, designed to be mounted to a wall or pole. After the enclosure is mounted, the Base Station is ins...

Page 37 - Connect and Register Wireless; Set Up Diagnostic Modem; To set up the diagnostic modem:; position. The LED for Line 1 should be; Register Wireless Telephones; Use the

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 2 6 6. Connect and Register Wireless Telephones 6.1 Set Up Diagnostic Modem Each MCU has an internal modem feature that allows SpectraLink technicians to dial into the system for troubleshooting and ...

Page 38 - Unregister Wireless Telephones

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 2 7 To register a Wireless Telephone to your system do the following: 1. Be sure all unregistered Wireless Telephones are powered off and that there is a Base Station plugged in and within range of t...

Page 39 - Program Wireless Telephone Features; LinkPlus; Test Wireless Telephones

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 2 8 mainly on. 3. Press the DEL/ENTER button. The line indicator LED for the selected line will be off with a short on flash . 4. Register the new Wireless Telephone or return the mode switch to the ...

Page 40 - Site Certification

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 2 9 7. Site Certification The installer should not leave the site before contacting SpectraLink to perform remote install verification. Contact a SpectraLink e ngineer on the technical support line 8...

Page 41 - System Administration; Troubleshoot Error Codes; button to; Troubleshoot Phone Features

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 3 0 8. System Administration 8.1 Troubleshoot Error Codes When an alarm is detected, the Error LED will light and the MCU’s status LEDs will display an alarm code. If the error code refers to a Base ...

Page 42 - Status LED Codes

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 3 1 8.3 Status LED Codes Status LEDs 12345 Description Action Random Cycling The Link 150 M3 MCU is powering up. Initialization to follow. This is not an error and should change to another code after...

Page 45 - Wireless Telephone Status Indicator Messages

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 3 4 Wireless Telephone Status Indicator Messages Indicator Description Action BATT Displays when user is on the Wireless Telephone and the battery charge is low. The user has two minutes to complete ...

Page 46 - Replace a Wireless Telephone; Delete Old Wireless Telephone; END

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 3 5 8.4 Replace a Wireless Telephone If a Wireless Telephone breaks or needs to be replaced, the old Wireless Telephone must be deleted and the new Wireless Telephone added. Delete Old Wireless Telep...

Page 47 - Clear Configuration on Replacement MCU; connected to the IPC ports.; button until the status LEDs light 2,3, and 4 of the Replacement; Connect the Replacement MCU; Remove the failed MCU from the IPC chain

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 3 6 8.5 Replace an MCU When the system has more than one MCU, each MCU contains a complete set of configuration information for the entire system. This includes Wireless Telephone registration inform...

Page 48 - Replace a Base Station; When the LED blinks amber, the system is ready for operation.

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 3 7 8.6 Replace a Base Station To replace a Base Station, unplug the existing Base Station and plug in the new Base Station. • The LED will blink red and green as the system software downloads to the...

Page 49 - Wireless Telephone Planning Worksheet

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 3 8 9. Wireless Telephone Planning Worksheet Copy and complete this worksheet to keep track of the port numbers, extensions, users, and features assigned to your Wireless Telephones. MCU ID: ________...

Page 50 - Base Station Location Worksheet; MCU

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 3 9 10. Base Station Location Worksheet MCU : ________ Base Station # Location (e.g.: building, floor #, detailed description) Port ID Base Station 1 1 Base Station 2 2 Base Station 3 3 Base Station ...

Page 51 - Select Alternate Spread Spectrum Sequence; switch to the; button to select the desired new sequence.

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 4 0 11. Appendix A: Technical Parameters 11.1 Select Alternate Spread Spectrum Sequence The SpectraLink system uses spread spectrum radio transmission. Spread spectrum takes a discrete signal, such a...

Page 52 - Change Companding; Replace an MCU; If the LED for; LED is lit, return the mode switch to the

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 4 1 11.2 Change Companding The factory setting on the Link 150 M3 MCU is compatible with Mu- law companding (signal compression), which is the standard used by most PBXs in North America. Systems out...

Page 53 - Appendix B: Program Analog Features; Defining Macros; Open Application Interface; Plan Programming

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 4 2 12. Appendix B: Program Analog Features 12.1 Defining Macros On an analog telephone system, telephone system features such as transfer, hold, or speed dial are usually accessed via key presses or...

Page 54 - Program Macro Codes

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 4 3 12.3 Program Macro Codes Functions are defined by placing an Administrative Call using the Administrative Wireless Telephone (registered to Line 2 of MCU 1). Follow these steps to place an admini...

Page 55 - Examples of Programming; Clear or Erase A Function:

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 4 4 12.4 Examples of Programming Transfer: On your telephone system, the Transfer feature is accessed using Flash * 7 . On the Wireless Telephone, Transfer will be accessed using FCN 2 . With the Mod...

Page 56 - Before Installing the OAI Telephony Gateway

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 4 5 13. Appendix C: Installing the Open Applications Interface (OAI) Telephony Gateway The OAI Telephony Gateway (MOG 500) allows the Link 150 M3 MCU to interface with an application server as shown ...

Page 57 - The OAI Telephony Gateway’s Front Panel; indicates an internal error; Gateway and the other MCUs.; Mount Telephony Gateway to Wall; To mount the OAI Telephony Gateway:

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 4 6 13.2 The OAI Telephony Gateway’s Front Panel The OAI Telephony Gateway’s front pane l has the following status indicators. • ERROR: indicates an internal error • Status LEDS: • LED 1 : future use...

Page 58 - Use only the provided Class II AC Adapter with output 24Vdc, 1A, 24W.

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 4 7 13.4 Initial Test Use only the provided Class II AC Adapter with output 24Vdc, 1A, 24W. 1. Connect the power plug from the OAI Telephony Gateway’s power adapter to the jack labeled POWER on the b...

Page 59 - Connect the OAI Telephony Gateway to the MCU; Do

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 4 8 13.5 Connect the OAI Telephony Gateway to the MCU 1. The OAI Telephony Gateway must be connected as the last box in the MCU chain. Connect the OAI Telephony Gateway to the OUT port on the MCU, us...

Page 60 - Connect the OAI Telephony Gateway to the; Assign A Function Key to OAI Telephony Gateway

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 4 9 13.6 Connect the OAI Telephony Gateway to the Application Server Using a standard 9-pin female D-type connector, connect the serial port on the front panel of the OAI Telephony Gateway to the PC,...

Page 61 - Certification Test; To test the Wireless Telephones:; and; LEDs should be on

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 5 0 13.8 Certification Test When the OAI Telephony Gateway is properly connected to the application server, the LEDs should look like this: Power On Error Off LED 1 LED 2 LED3/IPC On LED4/SD On when ...

Page 62 - Index

SpectraLink Corporation Link WTS Installation and Operation Part Number: 72- 0075- 01 -C -W.doc Page 5 1 Index AC Adapter MCU, 18 OAI, 47 A-law, 41 Alternate sequence, 40 Function Keys, 49 Attenuation, 7 Base Station, 18 Cabling, 7, 8 Description, 4 Installation, 23 LED, 30 Location form, 39 Outdoor...

SpectraLink 150 M3 MCU - Manuals

Manuals:

Manual SpectraLink 150 M3 MCU

Summary

SpectraLink Manuals