Speco Technologies VM19LCD - Manuals

Connect the audio (red and white) cables to the AUDIO INPUT R and L jacks on the back of the monitor and to the Audio Output jacks on the DVR. Viewing the Picture From the Connected Device 1. Plug in the monitor and the device if they aren't already plugged in. 2. Turn on the monitor and the device ...

If you want to use an external input source, before to select the source, you need to connect the devices, otherwise when you select the source, the none or no signal will appear on the screen. Press the source button on the monitor or remote control and the menu will appear on the screen. Then pres...

AUDIO BASS: Adjustment range:0-100 TREBLE: Adjustment range:0-100 BALANCE: Adjusts how much audio is sent to the left and right (-50 to +50). The intermediate value is 0. When indication value of balance increases toward +50, the volume of the right and left speaker increase and decrease. When the i...

2. AV Input Mode PICTURE BRIGHTNESS: Adjusts the brightness of the picture. CONTRAST: Adjusts the difference between the light and dark areas of the picture. HUE: -50 to +50 (only available on AV PAL) SATURATION: 0-100 SHARPNESS: 0-100 COLOR TEMP: Press the “+” button to change the color intensity o...

3. DVI Input mode PICTURE CONTRAST: Adjusts the difference between the light and dark areas of the picture. BRIGHTNESS: Adjusts the brightness of the picture. COLOR TEMP: Press + or － button to go into the Color Temp sub menu. Press the “+” button to change the color intensity of the temperature sel...