Speco Technologies P120FACD/P240FACD - Manuals

Speco Technologies P120FACD/P240FACD – Manual in PDF format online.

Manuals:

Manual

Manual Speco Technologies P120FACD/P240FACD

Summary

Page 2 - CAUTION; WARNING

Welcome Welcome A personal welcome to you from the management and employees of Speco Technologies All of the co-workers here at Speco Technologies are dedicated to providing excellent products with inherentlygood value, and we are delighted you have purchased one of our products. We sincerely trust ...

Page 3 - Contents

PUBLIC ADDRESS AMPLIFIER 1 P120FACD/P240FACD Contents Contents Unpacking .......................................................................................................................................2 Installation Environment ....................................................................

Page 4 - Installation; Environment; Unpacking

PUBLIC ADDRESS AMPLIFIER 2 P120FACD/P240FACD Installation Installation Environment Never place this product in an environment which could alter its performance or reduce its service life. Suchenvironments usually include high levels of heat, dust, moisture, and vibration. Important Safety Instructio...

Page 5 - Features; - BUILT IN SOUND SOURCE; ACCESSORIES

PUBLIC ADDRESS AMPLIFIER 3 P120FACD/P240FACD Features Features - DIGITAL PROCESSING & DIGITAL AMPLIFIER Designed with full digital amplifier, low power consumption, low set weight and low heat. - BUILT IN SOUND SOURCE You can use the FM digital tuner and MP3CD player which are built in the syste...

Page 6 - Additional Descriptions

PUBLIC ADDRESS AMPLIFIER 4 P120FACD/P240FACD Additional Descriptions Additional Descriptions - MP3 (MPEG AUDIO LAYER-3) MP3 is a music file format that can contain music with stereo sound quality as good as an audio CD.Compression rate is 1MB/1 minute, thus about 3-5MB for a typical 3-5 minute song....

Page 9 - EQ MODE AND SETUP BUTTON

PUBLIC ADDRESS AMPLIFIER 7 P120FACD/P240FACD 15. EQ MODE AND SETUP BUTTON This button is used for entering the EQ mode and to enter the SETUP mode.Please refer to the “CHANNEL EQ SETUP” section (page 14) and “SETUP Mode” section (page 15) for details. 16. MIC CHANNEL TONE CONTROL VOLUME Adjust the l...

Page 10 - Rear Panel; DC INPUT TERMINALS

PUBLIC ADDRESS AMPLIFIER 8 P120FACD/P240FACD Rear Panel Rear Panel 1. AC INLET Connect the standard three-pin AC cable to this inlet. 2. DC INPUT TERMINALS When AC power supply and DC 24V are connected at the same time, the AC power will take priority and theDC power will not be used.When the AC pow...

Page 11 - OPTIONAL EXTERNAL PAGING UNIT TERMINAL; MUSIC ON HOLD TERMINALS; PHANTOM POWER SWITCH

PUBLIC ADDRESS AMPLIFIER 9 P120FACD/P240FACD 5. OPTIONAL EXTERNAL PAGING UNIT TERMINAL This unit has the ability to be controlled via an external, zoned paging microphone, which will be available asa future option. For reference, here is the pin chart: 6. MUSIC ON HOLD VOLUME Control the volume leve...

Page 13 - Connecting Speakers; Do not use 8

PUBLIC ADDRESS AMPLIFIER 11 P120FACD/P240FACD Connecting Speakers Connecting Speakers Before connecting speakers, disconnect the AC power cable. Note the proper connecting terminals as shownbelow. Make certain that the total impedance is not less than the rated impedance indicated. NOTE : Be sure th...

Page 14 - FM Operation; - FM ANTENNA INSTALLATION

PUBLIC ADDRESS AMPLIFIER 12 P120FACD/P240FACD FM Operation FM Operation - MANUAL / AUTO TUNING METHOD 1. Choose the FM function using the FM/CD/AUX button.2. Select the station you want with the TUNING buttons. Auto Tuning : Hold the TUNING button for 2 seconds in either direction and the unit will ...

Page 15 - DO NOT USE MINI DISKS.

PUBLIC ADDRESS AMPLIFIER 13 P120FACD/P240FACD CD Operation CD Operation - PLAYING 1. Choose the CD function via the FM/CD/AUX select button. 2. When there is no disc, the VFD will show “NO DISC.”3. Put a disk in the slot. The player will load the CD automatically as you begin to put it in.4. Wait un...

Page 16 - EX

PUBLIC ADDRESS AMPLIFIER 14 P120FACD/P240FACD Channel EQ SETUP Channel EQ SETUP 1. Press the ENTER button to enter into the EQ mode 2. Choose the frequency H, M or L of the channel you want among .3. Adjust the tone level with the volume, .4. Repeat the above procedure 2~3 for the other channels.5. ...

Page 17 - SETUP Mode

PUBLIC ADDRESS AMPLIFIER 15 P120FACD/P240FACD SETUP Mode SETUP Mode Press the H of CH1 and CH6 at the same time ( ) to enter into the SETUP mode. Turn the volume, to enter into each setup function, MIC 1, 2 Mute level, Tel-In volume, Chime volume, etc.Press the H button of the CH6, to exit the curre...

Page 18 - EM BROADCASTING: VOLUME SETUP FUNCTION

PUBLIC ADDRESS AMPLIFIER 16 P120FACD/P240FACD 1. MIC PRIORITY (CH1,CH2) Turn the volume, to choose ‘SET MIC1(MIC2) MUTE LVL’, Press ENTER, . Choose MIN, MID, or MAX with the volume , Press ENTER, . - MIN : Attenuate level of the other channels by -6dB.- MID : Attenuate level of the other channels by...

Page 19 - Applications

PUBLIC ADDRESS AMPLIFIER 17 P120FACD/P240FACD TIMER OFF PLAY DISC SELECTOR 1 2 3 4 5 DISC SKIP OPEN/CLOSE ON OFF POWER -SKIP-SEARCH STOP/CLEAR PLAY/PAUSE 5DISC AUTOMATIC DISC LOADING SYSTEM PROG / REV REPEAT TIMER DISC INTRO HIGH DENSITY 1-BIT D/A CONVERTER RANDOM DIGITAL AUDIO COMPACT 1 2 3 4 5 1 2...

Page 20 - Block Diagrams

PUBLIC ADDRESS AMPLIFIER 18 P120FACD/P240FACD Block Diagrams Block Diagrams

Page 22 - Ser vice; Procedures; Warranty and Repair

PUBLIC ADDRESS AMPLIFIER 20 P120FACD/P240FACD Ser vice Ser vice Procedures Take steps to insure the problem is not related to operator error or other products within the system. Informationprovided in the troubleshooting portion of this manual may help with this process. Once it is certain that thep...