Speco Technologies KBD-927 - Manuals

Speco Technologies KBD-927 – Manual in PDF format online.

Manuals:

Manual

Manual Speco Technologies KBD-927

Summary

Page 2 - WARNING AND CAUTION; EXPLANATION OF GRAPHICAL SYMBOLS

2 WARNING AND CAUTION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT. EXPLANATION OF GRAPHICAL SYMBOLS The lightning flash with arrowhead sy mbol, withi...

Page 3 - FCC COMPLIANCE STATEMENT; THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO; CE COMPLIANCE STATEMENT

3 FCC COMPLIANCE STATEMENT FCC INFORMATION: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN...

Page 4 - IMPORTANT SAFEGUARDS

4 IMPORTANT SAFEGUARDS 1. 2. 3. 4. 5. 6. 6A. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. REA D INSTRUCTIO NS -- All the safety and operating ins tructions should be read before the appliance is operated. RETAIN INS TRUCTIONS -- The safety and operating ins tructions should be retained for futur...

Page 5 - Table of; Contents; Chapter 1.0 INTRODUCTION

5 Table of Contents Chapter 1.0 INTRODUCTION 1.1 Features 1.2 Unpacking Chapter 2.0 INSTALLATION 2.1 Connection Diagram 2.2 Dip Switch Setting 2.3 Keyboard Setup 2.4 Install with ADR series 2.5 Install with SDR series 2.6 Install with IDR series Chapter 3.0 OPERATION 3.1 Multiplexer Control 3.2 Keyb...

Page 6 - Chapter 1; INTRODUCITON; The keyboard controller features:

6 Chapter 1 INTRODUCITON 1.1 Features This keyboard controller is capable to control 32 FastraxII dome cameras and remote control functions for variety of external switching devices like Multiplexer(max 255), Digital Video Recorder(max 99) etc… The keyboard controller features: • The capability of c...

Page 8 - Chapter 2; INSTALLATION; Connection Diagram; Figure 2 – Basic installation diagram

8 Chapter 2 INSTALLATION 2.1 Connection Diagram 2.1.1 Basic Installation Diagram 3~4 5~8 1~2 1~4 ALARM OUTPUT UP TO 4 ALARM OUTPUT ALARM OUTPUT ALARM INPUT HALF DUPLEX MODE : TX+,TX- RS-485 ALARM INPUT UP TO 8 ALARM INPUT LIGHT SIREN SENSOR DOM E 1 + DO M E 1 - AWG # 24 BNC BNC MONITOR AC 24V POWER ...

Page 9 - Figure 3 – Single Multiplexer

9 2.1.2 Single Multiplexer RS-485(-) PIN No.5 RS-485(+) PIN No.4 POWER AC 24V AL5 AL6 GND AL7 AL8 GND COM3 NC3 NO3 COM4 NC4 NO4 AL1 GND AL2 AL3 GND AL4 COM 1 COM 2 NO1 NC1 NO2 NC2 AC + RX -( T X -) RX +( TX +) AC - (R X -) FG N D AC + AC - (R X + ) GN D RS -4 8 5 (RS-422) (R X + ) (R X -) RX +( TX +...

Page 10 - Figure 4 – Two Multiplexer

10 2.1.3 Single User with Two Multiplexer RS-485(+) PIN No.4RS-485(-) PIN No.5 BNC SPOT MONITOR 2ND MAIN MONITOR 2ND MULTIPLEXER AWG # 24 BNC BNC 1ST MAIN MONITOR 1ST MULTIPLEXER BNC AC 24V POWER POWER AC 24V RX -( T X -) RX +( TX +) (R X -) (R X + ) (RS-422) RS -4 8 5 GN D (R X + ) AC - AC + FG N D...

Page 11 - Two Multiplexer with Slave Keyboard Controller; Figure 5 – Two Multiplexer with Slave Keyboard Controller

11 2.1.4 Two Multiplexer with Slave Keyboard Controller SPOT MONITOR SPOT MONITOR RS-485(-) PIN No.5 RS-485(+) PIN No.4 BNC 1ST MULTIPLEXER FOR SLAVE K/B 1ST MAIN MONITOR BNC 2ND MULTIPLEXER 2ND MAIN MONITOR FOR MASTER K/B BNC POWER AC 24V AL5 AL6 GND AL7 AL8 GND COM 3 NC3 NO3 COM 4 NC4 NO4 AL1 GND ...

Page 12 - Figure 7 – Termination and ID Switches.; Figure 8 – Keyboard DIP Switches

12 2.2 Termination & Dip Switch Setting The first and last devices in an installation (dome and keyboard controller) must have the data line terminated by setting the DIP switch. Without proper termination, there is potential for control signal errors. Total length of the cable for communication...

Page 13 - Multiplexer Control; Unit setup

13 DOME Multi- plexer Sub- controll er Termination 1 2 3 4 5 6 Controller 7 8 ON ON ON ON SLAVE ON OFF OFF OFF OFF reserved MASTER OFF Factory Use Table 1 - S1 Switch Setting 2.3 Multiplexer Control Duplex setup: NOTE: Multiplexers require a new ROM version to be controlled by the keyboard controlle...

Page 16 - Install with ADR series; Figure 9 – ADR Connection Diagram

16 ← Current Device ID = 1 ← Default setting is 9999 for administrator 1111 for user FASTRAX-2L Vxxx Slave ID = 1 Input Password : xxxx CAM:000 3. P ress Ctrl + Menu . Set the Slave ID to 01 4. Set Slave Node to “B” in case that master keyboard model is KBD-927(N : NTSC,P : PAL) ← A : KBD-927 Slave ...

Page 19 - Install with SDR series; Figure 10 – SDR Connection Diagram

19 RS232/RS485 Baud Rate Parity Data Stop Usage RS232 9600 None 8 1 Remote Control RS485 9600 None 8 1 PTZ Control 5) After setting Unit ID, Camera, and RS232/RS485, installing dome camera is basically completed. Please refer to the manual of ADR for the other installation. 6) Press the related numb...

Page 22 - Install with IDR series; Figure 11 – IDR Connection Diagram

22 2.7 Install with IDR series 22 AWG UTP CABLE CONVERTER RS-232 CABLE DATA1 DATA2 DOME R(T)X- R(T)X+ WIRE CONNECTION JUNCTION BOX DOME1 +DOME1 - TX+(RS-485)TX-(RS-485) DOME2 +DOME2 - IDR SERIES CONVERTER JUNCTION BOX J-BOX(REAR) J-BOX(FRONT) RS-232C to RS-485 Figure 11 – IDR Connection Diagram If u...

Page 25 - Chapter 3; OPERATION; Controlling Multiplexer; Single multiplexer configuration; Next; Viewing full screen mode

25 Chapter 3 OPERATION 3.1 Keyboard Lock/Unlock (Hidden command) When the user leaves the control desk, he may wish to lock the keyboard controller to prevent unauthorized use. Pressing 777 + Enter will lock the keyboard controller. Pressing 777 + Enter while the keyboard is locked will open the pas...

Page 26 - Cam; Picture on Spot output monitor

26 Select cameras 1 to 16 by pressing the camera number and then Main. The selected camera will appear in the full screen mode and is under control if it was dome camera. Even if no camera is connected to the multiplexer input, the screen will show the camera input (see following example). To select...

Page 27 - Summary of Keyboard Controls; Figure 12 – Keyboard Key map

27 2) to the spot output of multiplexer 2 and the keyboard controller has control of the selected camera. 31+Cam = camera 15 of the second multiplexer. 3.3 Summary of Keyboard Controls C a m :0 0 1E ZOOM WIDE ZOOM TELE IRIS OPEN IRIS CLOSE FOCUS NEAR FOCUS FAR MULTIPLEXER DVR CONTROL MULTIPLEXER IDR...

Page 28 - Key operation example; Function Key

28 Key operation example Ctrl + Menu : Press and hold down Ctrl Key and press Menu Key 1 + Cam : Press 1 Key, Cam Key sequentially Ctrl + Joystick : Press and hold down Ctrl Key while manipulate Joystick Handle Enter + Joystick : Press and hold down Enter Key while manipulate Joystick Handle 3.3.1 K...

Page 29 - Key Label

29 Manual Focus Overrides auto focus. Moving the Zoom handle reactivates Auto Focus mode. Manual Iris Overrides auto iris. Moving the joystick reactivates Auto Iris mode. Zoom Zoom control. Joystick Twist Up / Down Left / Right Press(Toggle) Zoom control (proportional to position).(HID2404CZx model ...

Page 32 - Appendix A; Trouble Shooting; Problem Possible

32 Appendix A Trouble Shooting If problems occur, verify the installation of the camera with the instructions in this manual and with other operating equipment. Isolate the problem to the specific piece of equipment in the system and refer to the equipment manual for further information. Problem Pos...

Page 33 - Appendix B; SPECIFICATION; KEYBOARD CONTROLLER

33 Appendix B SPECIFICATION Power Consumption Control Method Baud Rates Operating Temperature Humidity Storage temperature Dimension Weight Communication 12VDC, 0.5W RS-485, RS-232C 2400~230K bps 0°C to 50°C(32 o F to 122 o F) 0 to 90%RH(non-condensing) -20°C to 60°C(-40 o F to 122 o F) 380x168x70 P...