Speco Technologies HTD8FFI - Manuals

Speco Technologies HTD8FFI – Manual in PDF format online.

Manuals:

Manual

Manual Speco Technologies HTD8FFI

Summary

Page 3 - Precautions; NOTE

Precautions Do not install the camera inextreme temperature conditions. Do not touch the front lens of thecamera. Never keep the camera pointeddirectly at strong light. Do not expose the camera toradioactivity. Do not install the camera underunstable lighting conditions. Do not drop the camera or su...

Page 4 - Focus Free; SPECIFICATIONS

650 Line Intensifier3 (Weatherproof Color Dome Camera) Focus free AI Motorized zoom Lens(2.8-10mm) HTD8FFI ■ Focus Free SPECIFICATIONS MODEL HTD8FFI 1/3” Sony Super HAD ll CCDNTSC, PALNTSC=811(H) * 508(V) / PAL=795(H) * 596(V)NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)NTSC=15.734KHz(H) & 59.94Hz(...

Page 7 - CAMERA INSTALLATION

7 CAMERA INSTALLATION jvuulj{Gwv~ly Gjhis lG XUG~ oluG|zpunGXYG} vs {zGkjGOGG\WWGh PG YUG~ oluG|zpunGY[G} vs {zGh jGO[WG} Gh P ZUGjvuulj{G} pklvGjh is lG T jvuulj{GiujGjhislG{vG{olGiujGqhjrUG \UGjvuulj{Gy zT[_\Gjh is lG T jGY~ GjGGG[_\GGGU kjGXY} Gw...

Page 8 - Contents

1 Contents ◑ Contents ◑ Safety Instructions ◑ FEATURES ◑ FEATURES ◑ Camera Menu Set Up 1. Preset Mode 2. Menu Set Up 3. Lens Setting 4. Exposure Setting 5. White Balance Setting 6. WDR Setting 7. Backlight Setting 8. SPECO DNR Setting 9. Day/Night Setting 10. Special Setting 11. RETURN Setting ◑ Tro...

Page 9 - Safety Instructions; Precautions for use; This camera should be installed by qualified personnel only

2 Safety Instructions Precautions for use Please handle this camera carefully : ◑ This camera should be installed by qualified personnel only ◑ There are no user serviceable parts inside ◑ Do not disassemble this camera other than to make initial adjustments ◑ Use a UL approved regulated 24 volt AC ...

Page 10 - FEATURES; Now with “PRESETS”

3 FEATURES Now with “PRESETS” PRESETS (Outdoor, Indoor, Elevator, Lobby, Hallway & Low Light) Used for a quick and easy setup for the installation environment. 650TVL Resolution Horizontal resolution of 650 TV lines is achieved by using a SONY Super-HAD CCD with 410,000 pixels, and a custom DSP ...

Page 11 - Motion Detection with Alarm Output

4 FEATURES Motion Detection with Alarm Output Built in motion detector with adjustable areas of coverage will Send a signal to an external alarm device when motion is detected. PRIVACY MASK It also has the ability to mask up to 8 areas of the picture where Viewing is not desired. Each zone can be in...

Page 13 - Exposure Setting

6 3. THE Lens mode has sub menu items as listed below.- BRIGHTNESS : Adjusts the video brightness.- FOCUS ADJ : To adjust the DC lens focus correctly, you must activate the Focus Settings mode under each lens menu. Activate the Focus Settings mode, adjust the lens focus, and then deactivate the sett...

Page 15 - WDR Setting

8 ※ Select one of the following 5 modes, as appropriate for your purpose.◆ ATW : Select this when the color temperature is between 1,700˚K and 11,000˚K.◆ OUTDOOR : Select this when the color temperature is between 1,700˚K and 11,000˚K. (sodium light inclusion)◆ INDOOR : Select this when the color te...

Page 16 - Backlight Setting; ◆ Select 'BLC' to adjust the area to be enhanced then adjust the level.

9 ● Backlight Setting Unlike conventional cameras, the 650Line Intensifier3™ Series are designed to deliver a distinctive subject and background at the same time, even when the subject is backlight, by using the features of the proprietary W-V DSP chip.1. When the SETUP menu screen is displayed, sel...

Page 17 - SPECO DNR Setting

10 BLC SETUP HLC SETUP Press Set to Return Press Set to Return LEVEL TOP BOTTOM LEFT RIGHT LEVEL LIMITS MASK COLOR MASK TONE TOP BOTTOM LEFT RIGHT LOW 38 109 54 121 MIDDLE NIGHT ONLY BLACK 1 5 120 5 172 ☞ NOTE ■ Because there can be a difference in the effectiveness of HLC according to the amount of...

Page 19 - Special Setting

12 ◆ AUTO : The mode is switched to 'Color' in a normal environment, but switches to 'B/W' mode when ambient illumination is low. To set up the switching time for AUTO mode, press the Function Setup switch. You can turn on or off the burst signal on B/W mode.- BURST MODE : You can turn on or off the...

Page 20 - Select a desired mode using the Function Setup switch.

13 2. Select a desired mode using the Function Setup switch. SPECIAL IMAGE SETUP 1.IMAGE ADJ 2.MONITOR 3.CAM TITLE 4.SYNC 5.MOTION DET 6.PRIVACY 7.COMM ADJ 8.LANGUAGE 9.RETURN 1.V-REV 2.H-REV 3.D-ZOOM 4.DIS 5.FONT COLOR 6.SHARPNESS 7.RETURN OFF INT OFF OFF ENGLISH OFF OFF WHITE ON ◆ IMAGE ADJ. :1) W...

Page 21 - SHOP

14 ☞ NOTE ■ When the V-REV or H-REV mode is enabled, the text on the screen does not flip.■ If you increase the SHARPNESS level too high, the picture may become distorted or noise may appear. ☞ NOTE ■ When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if you ente...

Page 22 - ◆ PRIVACY : Mask an area you want to hide on the screen.

15 ☞ NOTE ■ When using AC power at 60Hz(NTSC), 50Hz(PAL), frequency, you can use the L/L type synchronization.■ When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode. ◆ MOTION DET :This product has a featurethat allows you to observe movement ofobjects in 8 different areas on the screen...

Page 23 - RETURN Setting; ◆ COMM ADJ

16 1) When the SPECIAL menu screen is displayed, press the Function Setup switch so that the arrow indicates 'PRIVACY'.2) Set up the mode using the Function Setup switch.- AREA : You can select up to 12 PRIVACY areas.- MODE : Determines whether to use the area selected in the AREA.- MASK COLOR : Det...

Page 24 - Trouble Shooting; PROBLEM

17 ● Trouble Shooting PROBLEM Northing appears on the screen. ☞ Check the power cable, power supply output and video connection between the camera and monitor. ☞ Are the camera lens or the lens glass dirty? Clean the lens / glass with a soft clean cloth. ☞ Adjust the monitor controls, as required. ☞...

Page 25 - PRODUCT WARRANTIES AND INFORMATION EFFECTIVE JULY 8, 2008

18 POLICY, TERMS AND CONDITIONS OF SALE This statement of policy is in lieu of any other policy, expressed or implied, and no representative or person is authorized to assume for us any other liability or policy without our written consent. We cannot be held responsible for typographical errors. TER...

Page 26 - ▶ MEMO