Sony TS-DSC-S40-01 - Manuals

Page 2 - TrackSnap Manual; TS; Introduction; Pryoelectric I; TrackSnap Setup Tips

TrackSnap Manual Model TS-DSC-S40-01 Page 2 of 12 Version TS S40.01 This document comprises information provided by Suppliers and is assumed to be correct. Draft Introduction Congratulations on the purchase of a new TrackSnap camera system. This manual provides detailed information for the setup and...

Page 3 - assumed to be correct.; Draft; PIR Motion Sensors Basic Overview for Effective Use; PIR; stands for; PIR Sensor Detection Area

TrackSnap Manual Model TS-DSC-S40-01 Page 3 of 12 Version TS S40.01 This document comprises information provided by Suppliers and is assumed to be correct. Draft PIR Motion Sensors Basic Overview for Effective Use All TrackSnap cameras use a PixController PIR motion detection sensor. PIR stands for ...

Page 4 - Auto Walk-Test mode on power up

TrackSnap Manual Model TS-DSC-S40-01 Page 4 of 12 Version TS S40.01 This document comprises information provided by Suppliers and is assumed to be correct. Draft Auto Walk-Test mode on power up When turning power on to your TrackSnap both the red and green LED will light up. They will both stay on f...

Page 5 - DIP Switch Settings; Default Setting; PIR Delay Setting

TrackSnap Manual Model TS-DSC-S40-01 Page 5 of 12 Version TS S40.01 This document comprises information provided by Suppliers and is assumed to be correct. Draft DIP Switch Settings PixController 10-Position DIP Switch Introduction The 10-Position DIP switch on the PixController board is used to set...

Page 6 - Camera Attached Setting

TrackSnap Manual Model TS-DSC-S40-01 Page 6 of 12 Version TS S40.01 This document comprises information provided by Suppliers and is assumed to be correct. Draft Camera Attached Setting Switches 5, 6, and 7 setups which camera is attached to your PixController board. Note: Even though there are 2 di...

Page 7 - LANC Video Delay Setting; Recording Time; 0 Seconds - Continuous recording as long as motion is present.; PIR Delay; LED Off

TrackSnap Manual Model TS-DSC-S40-01 Page 7 of 12 Version TS S40.01 This document comprises information provided by Suppliers and is assumed to be correct. Draft LANC Video Delay Setting Switches 8 and 9 sets up the recording time for your LANC camcorder. Recording Time Switch 8 Switch 9 30 Seconds ...

Page 8 - Inside Your TrackSnap Camera

TrackSnap Manual Model TS-DSC-S40-01 Page 8 of 12 Version TS S40.01 This document comprises information provided by Suppliers and is assumed to be correct. Draft Inside Your TrackSnap Camera PixController Main Board Features Board can be mounted vertically or horizontally. The unique dual element PI...

Page 9 - PixController LE Control Board Back

TrackSnap Manual Model TS-DSC-S40-01 Page 9 of 12 Version TS S40.01 This document comprises information provided by Suppliers and is assumed to be correct. Draft PixController LE (Rev. 2) Control Board Front PixController LE Control Board Back

Page 10 - Mounting the PIR Lens; do; LE Board Mounting - PIR Sensor Considerations; THE CASE WILL NOT PROTECT THE CAMERA FOR SEVERE IMPACT; . The camera itself is not

TrackSnap Manual Model TS-DSC-S40-01 Page 10 of 12 Version TS S40.01 This document comprises information provided by Suppliers and is assumed to be correct. Draft Mounting the PIR Lens The PIR lens is mounted in the Pelican 1060 case with your board. The lens is centred over the PIR Sensor and be 16...

Page 11 - Sony DSC-S40 Camera Settings and SPECIFICATIONS:

TrackSnap Manual Model TS-DSC-S40-01 Page 11 of 12 Version TS S40.01 This document comprises information provided by Suppliers and is assumed to be correct. Draft Sony DSC-S40 Camera Settings and SPECIFICATIONS: For fastest shutter times set your Sony DSC-S40 camera setting up as: Leave the camera o...

Page 12 - Troubleshooting; Symptom; TrackSnap will not power up.

TrackSnap Manual Model TS-DSC-S40-01 Page 12 of 12 Version TS S40.01 This document comprises information provided by Suppliers and is assumed to be correct. Draft Troubleshooting Symptom Cause Solution TrackSnap will not power up. Check switch on battery holder is in the on position. Check 9V Alkali...