Sony STR-DN1060/STR-DN860 - Manuals

Connecting the receiver to the network using a LAN cable (for wired LAN connections only) [75] Setting up a wired LAN connection [76] Setting up a wireless LAN connection (for wireless LAN connectionsonly) Connecting the receiver to the network using the wireless LAN antenna (for wireless LAN connec...

Checking the registered TV SideView device (Registered Remote Devices) [88] Deleting TV SideView device from device list [89] Using Google Cast™ to enjoy audio content from a smartphone or tabletdevice Using Google Cast™ to enjoy audio content from a smartphone or tablet device [90] Setting whether ...

Using Other Features Interlocking with BRAVIA TV and other devices (“BRAVIA” Sync) What is “BRAVIA” Sync? [116] Preparing for “BRAVIA” Sync [117] Enjoying an input source from a connected device immediately (One-Touch Play) [118] Enjoying TV sound from the speakers connected to the receiver (System ...

Adjusting Settings Easy Setup Setting up the receiver using Easy Setup [134] Speaker Settings 1. About Auto Calibration [135] 2. Before you perform Auto Calibration [136] 3. Connecting the optimizer microphone [137] 4. Selecting the front speakers [138] 5. Performing Auto Calibration [139] 6. Checki...

Input Settings Changing the assignment and display for the input jacks [181] Changing the name for each input (Name) [182] Network Settings Setting up a wired LAN connection [183] Setting up a wireless LAN connection [184] Checking the network connection status (Network Connection Status) [185] Chec...

Selecting source signals for Zone 2/Zone 3/HDMI zone (Input) (for STR-DN1060 only) [200] Adjusting the volume for Zone 2/Zone 3 (Volume ) (for STR-DN1060 only) [201] Setting the volume control for Zone 2 (Zone2 Line Out) (for STR-DN1060 only) [202] System Settings Selecting the language (Language ) ...

PROTECTOR [219] An over -current from the USB port was detected. [220] List of messages after Auto Calibration measurements [221] General The receiver is turned off automatically. [222] Cannot find an available input when connecting several digital devices. [223] Image No image appears on the TV. [2...

The FM reception is poor. [241] The FM stereo reception is poor. [242] You cannot tune to radio stations. [243] RDS does not work (for European and Asia -Pacific models only). [244] The RDS information that you want does not appear (for European and Asia -Pacific models only). [245] iPhone/iPad/iPod...

A server does not appear in the server list. ([Cannot find the server.] appears on the TV screen.) [264] Playback does not start, or the player does not automatically proceed to the next track or file. [265] The sound skips during playback. [266] [No playable file in this category.] appears. [267] C...

No image from an MHL-compatible source device. [286] Remote control The remote control does not function. [287] If the problem is not solved Reverting to the factory default settings [288] Resetting sound fields to the default settings [289] Customer support websites [290] Other Information Trademar...

[3] Parts and Controls Receiver (STR-DN1060) On/standby indicator (STR-DN1060) Green: The receiver is turned on. Amber: The receiver is in standby mode, and: [Control for HDMI], [Remote Start], [Bluetooth Standby] (*) or [Quick Start/Network Standby] (**) is set to [On]. [Standby Through ] is set to...

9. AUDIO IN jacks 10. VIDEO IN/OUT (*) jacks 11. COMPONENT VIDEO IN/OUT (*) jacks 12. FM ANTENNA terminal 13. OPTICAL IN jacks * Connect a TV to the corresponding output jacks to watch video input from these jacks. ・ HDMI IN jacks: HDMI OUT A (TV) or HDMI OUT B/HDMI ZONE jack ・ VIDEO IN jacks: VIDEO...

[10] Parts and Controls Receiver (STR-DN860) Rear panel (STR-DN860) 1. COAXIAL IN jack 2. HDMI IN/OUT (*) jacks 3. Wireless LAN antenna 4. LAN port 5. SPEAKERS terminals 6. SUBWOOFER OUT jacks 7. AUDIO IN jacks 8. VIDEO IN/OUT (*) jacks 9. FM ANTENNA terminal 10. OPTICAL IN jacks * Connect a TV to t...

1. (on/standby) Turns the receiver on or sets it to the standby mode. Saving power in standby mode Save power by setting the receiver as follows: Set [Control for HDMI], [Remote Start], [Bluetooth Standby] and [Quick Start/Network Standby] (*) to [Off]. Turn off the power for Zone 2, Zone 3 and HDMI...

6. WATCH, LISTEN Select [Watch] or [Listen] on the home menu directly. When pressing these buttons on the Watch or Listen screen, you can move the focus to select the desired input. 7. CUSTOM PRESET (1, 2, 3) Saves and recalls various settings for the receiver. Press to select the custom preset sett...

Front speaker (Left) Front speaker (Right) Center speaker Surround speaker (Left) Surround speaker (Right) Surround back speaker (Left) Surround back speaker (Right) Subwoofer When using a 6.1-channel connection The following illustration is an example of an arrangement with only one surround back s...

Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want. [14] Preparation 1. Installing speakers Installing 7.1-channel speaker system using front highspeakers You can enjoy vertical sound effects by connecting additional two front high speakers. Front spea...

Front high speaker (Right) Subwoofer 1. Place the front high speakers at an angle between 25° and 35°. 2. Place the front high speakers at height angle of 20° ± 5°. Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want. [15] Preparation 1. Installing spea...

Front speaker (Left) Front speaker (Right) Center speaker Surround speaker (Left) Surround speaker (Right) Subwoofer Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want. [16] Preparation 1. Installing speakers Installing speakers in other rooms (Zone 2/...

Front speaker (Left) Front speaker (Right) Center speaker Surround speaker (Left) Surround speaker (Right) Subwoofer Zone 2 speaker (Left) Zone 2 speaker (Right) Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want. When listening in main zone, Zone 2 an...

Front speaker (Left) Front speaker (Right) Center speaker Subwoofer Zone 2 speaker (Left) Zone 2 speaker (Right) Zone 3 speaker (Left) Zone 3 speaker (Right) [17] Preparation 2. Connecting speakers Connecting speakers Connect each speaker as illustrated below. Be sure to disconnect the AC power cord...

Monaural audio cable (not supplied) Speaker cable (not supplied) * If you connect a subwoofer with an auto standby function, turn off this function when watching movies. If the auto standby function is turned on, it switches to standby mode automatically based on the level of the input signal to the...

[18] Preparation 2. Connecting speakers Connecting the speakers in Zone 2 and/or Zone 3 (forSTR-DN1060 only) You can enjoy sound from a device connected to the receiver in a zone other than the main zone. For example, it is possible to play a CD in Zone 2 while playing a DVD in the main zone. Place ...

Connecting the speakers in Zone 3 Speakers Speaker cable (not supplied) Note When using this Zone 3 connection, you need to set up the SPEAKERS SURROUND/ZONE 3 terminals. Only audio signals from [USB], [Bluetooth] (while in BLUETOOTH RX mode only), [Home Network], [Music Services], [FM TUNER ] and a...

Speaker cable (not supplied) Connect the jacks on the Lo (or Hi) side of the front speakers to the SPEAKERS FRONT A terminals, and connect the jacks on the Hi (or Lo) side of the front speakers to the SPEAKERS SURROUND BACK/BI -AMP/FRONT HIGH/FRONT B terminals. Make sure that metal fittings of Hi/Lo...

Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony. Note For this connection, you need to turn the Control for HDMI function on. Press HOME to display the home menu, select [Setup] - [HDMI Settings], and set [Control for HDMI] to [On]. Hint If the HDMI jack of the TV (l...

Component video cable (not supplied) Video cable (not supplied) Audio cable (not supplied) Optical digital cable (not supplied) Note Connect a TV monitor or a projector to the HDMI OUT A (TV) , HDMI OUT B/HDMI ZONE or MONITOR OUT jack on the receiver. Depending on the status of the connection betwee...

Connecting a TV compatible with the Audio Return Channel (ARC)function via an HDMI connection With just one HDMI cable connection, you can listen to the TV audio from the speakers connected to the receiver while the receiver sends audio and video to the TV. HDMI cable (not supplied) Sony recommends ...

Video cable (not supplied) Audio cable (not supplied) Optical digital cable (not supplied) Note Connect a TV monitor or a projector to the HDMI TV OUT or MONITOR OUT jack on the receiver. Depending on the status of the connection between the TV and the antenna (aerial), the image on the TV screen ma...

Optical digital cable (not supplied) HDMI cable (not supplied) [23] Preparation 3. Connecting a TV Notes on connecting cables Be sure to disconnect the AC power cord (mains lead) before connecting cables. It is not necessary to connect all of the cables. Connect cables according to the availability ...

separate audio cables or digital connecting cables, then reassign the input jacks if the sound is not output correctly. When connecting optical digital cables, insert the plugs straight until they click into place. Do not bend or tie optical digital cables. Hint All of the digital audio jacks are co...

Note Depending on the TV or video device, 4K or 3D images may not be displayed. Check the HDMI video formats supported by the receiver. Refer to the operating instructions of each connected device for details. [25] Preparation 4. Connecting audio -visual devices and the antennas (aerials) Connecting...

Super Audio CD player, CD player Blu-ray Disc player, DVD player DVD recorder Game console such as PlayStation4 Cable box or satellite box Hint This HDMI connection is an example. You can connect each HDMI device to any HDMI input, including the HDMI input on the front panel. The BD/DVD and SA-CD/CD...

Optical digital cable (not supplied) Audio cable (not supplied) Video cable (not supplied) Coaxial digital cable (not supplied) Hint You can rename each input so that the name can be displayed on the display panel of the receiver. For details, see “Changing the name for each input (Name).” The image...

Front (for STR-DN1060 only) The HDMI/MHL (VIDEO 2 IN) jack supports MHL 2 technology. Rear The HDMI IN SAT/CATV (MHL) jack supports MHL 3 technology. Mobile device MHL cable (not supplied) We recommend using an MHL 3-compatible cable to connect a mobile device that supports 4K output. MHL Direct Att...

Connecting another amplifier or TV in the HDMI zone(for STR-DN1060 only) HDMI input video/audio signals are output in HDMI zone using the HDMI OUT B/HDMI ZONE jack of the receiver. Speakers TV Amplifier/receiver HDMI cable (not supplied) Note To use this connection, set [HDMI Out B Mode ] in the HDM...

Dolby Digital Plus [DOLBY D +] (*1) Maximum number of channels: 7.1 Connection with the receiver: HDMI (*2) Dolby TrueHD [DOLBY HD ] (*1) Maximum number of channels: 7.1 Connection with the receiver: HDMI (*4) DTS [DTS] Maximum number of channels: 5.1 Connection with the receiver: COAXIAL/OPTICAL , ...

Color (Deep Colour), “x.v.Color (x.v.Colour),” and 4K or 3D transmission. To enjoy 3D images, connect a 3D-compatible TV and video device (Blu-ray Disc player, Blu -ray Disc recorder, PlayStation 4, etc.) to the receiver using High Speed HDMI cables, put on 3D glasses, and then play 3D-compatible co...

Server (computer, etc.) Router Modem Internet Note Audio playback on a server may occasionally be interrupted if you use a wireless connection. When using Screen mirroring, BLUETOOTH TX or BLUETOOTH RX function, stand up both wireless LAN antennas for better performance. [40] Preparation 6. Turning ...

Do not expose the remote control sensor to direct sunlight or lights. Doing so may cause a malfunction. If you do not intend to use the remote control for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. When the receiver no longer respond...

After you turn off the receiver, [STANDBY] flashes on the display panel. Do not disconnect the AC power cord (mains lead) while [STANDBY] is flashing. This may cause a malfunction. [42] Preparation 7. Setting up the receiver using Easy Setup Setting up the receiver using Easy Setup When you turn on ...

** The measurement result may be not utilized, depending on the audio formats. Note The D.C.A.C. is designed to achieve proper sound balance for your room. However, you can adjust the speaker levels manually according to your preference using [Test Tone]. [44] Preparation Tips for automatic calibrat...

Optimizer microphone (supplied) 1. Connect the supplied optimizer microphone to the AUTO CAL MIC jack. 2. Set up the optimizer microphone. Place the optimizer microphone where you will sit and set it at the same height as your ears. [46] Preparation Tips for automatic calibration (Auto Calibration) ...

HIGH/FRONT B terminals. SP A+B (*) : Speakers connected to both the SPEAKERS FRONT A and SPEAKERS SURROUND BACK/BI -AMP/FRONT HIGH/FRONT B terminals (parallel connection). (None): [SPK OFF] appears on the display panel. No audio signals are output from any speaker terminals. * To select [SP B ] or [...

If an error code or warning message appears on the screen in step 3, see “ List of messages after Auto Calibration measurements.” This setting is not available when headphones are connected. Hint The Auto Calibration function will be canceled if you perform the following during the measurement proce...

of messages after Auto Calibration measurements.” Hint The measurement results may vary depending on the position of the subwoofer. However, continuing to use the receiver with that value does not cause problems. [49] Enjoying Video and Sound Playing AV devices Enjoying Video and Sound This topic ex...

Enjoying audio content from iTunes or an iPhone/iPad/iPod via the network (AirPlay) BLUETOOTH devices Enjoying audio content from an iPhone/iPod or other smartphone You can transmit audio from an iPhone/iPod or other smartphone to the receiver via BLUETOOTH. Enjoying audio content using the BLUETOOT...

You can display the menu of the receiver on the TV screen (*). * For STR-DN1060, this is only possible when the TV is connected to the HDMI OUT A (TV) jack. 1. Switch the input of the TV to the input to which the receiver is connected. 2. Press HOME to display the home menu on the TV screen. 3. Pres...

Enjoying sound of an ARC (Audio Return Channel)compatible TV If your TV supports the Audio Return Channel (ARC) function, set the receiver by the following procedure to output the sound of the TV from the speakers connected to the receiver. 1. Select [Setup] - [HDMI Settings] from the home menu. 2. ...

USB port You can enjoy music from an iPhone/iPod by connecting it to the (USB) port on the receiver. 1. Select [Watch] or [Listen] - [USB] from the home menu. When the iPhone/iPod is connected, a list of its contents appears on the TV screen. You can operate the iPhone/iPod using the remote control ...

PC iPhone/iPad/iPod 1. Tap/click icon on the iPhone/iPad/iPod screen or iTunes window. 2. Select [STR-DN1060 XXXXXX ] (*) or [STR-DN860 XXXXXX ] (*) on the AirPlay menu of iTunes or your iPhone/iPad/iPod. 3. Start playing back audio content on an iPhone/iPad/iPod or in iTunes. * XXXXXX is the identi...

BLUETOOTH function. [PAIRING] flashes on the display panel. Perform step 3 within five minutes, otherwise pairing will be canceled. If pairing is canceled, repeat this step. 3. Perform pairing on the BLUETOOTH device to detect this receiver. For details, refer to the operating instructions of your B...

Compatible iPhone/iPad/iPod models You can use the following iPhone/iPad/iPod models on this receiver. Update your iPhone/iPad/iPod with the latest software before using it. USB works with iPhone: iPhone 6 Plus/iPhone 6/iPhone 5s/iPhone 5c/iPhone 5/iPhone 4s/iPhone 4/iPhone 3GS/iPhone 3G iPod touch:...

You cannot transfer songs onto the iPhone/iPad/iPod from the receiver. Do not remove the iPhone/iPad/iPod during operation. To avoid data corruption and damage to the iPhone/iPad/iPod, turn the receiver off when connecting or removing the iPhone/iPad/iPod. [59] Enjoying Video and Sound Playing conte...

USB specifications and Compatible USB devices File formats playable via USB connection Supported music formats (*1) MP3 (MPEG 1 Audio Layer-3) (*2): .mp3 AAC/HE-AAC: .m4a, .aac, .mp4 (*3), .3gp (*3) WMA9 Standard: .wma WMA 10 Pro (*4): .wma LPCM (*2): .wav FLAC: .flac, .fla Dolby Digital (*2): .ac3 ...

PNG: .png (*6) GIF: .gif (*6) *1 Compatibility with all encoding/writing software, recording devices and recording media cannot be guaranteed. *2 The receiver can play “.mka” files. *3 The receiver can only play “.mp4” and “.3gp” audio file formats. *4 The receiver does not play coded files such as ...

NWZ-B173F/B183F NWZ-F806/F887 NWZ-ZX1 NWZ-A15/A17 NWZ-WS613/WS615 NWZ-M504 MICROVAULT: USM4GL/USM8GL/USM32GL USM4GM USM8GN/USM32GN USM8GQ/USM32GQ/USM64GQ USM32GLX/USM64GLX USM8GR/USM16GR/USM32GR USM64GP USM8GT USM16GU USM4GV USM8GQX/USM128GQX USM32W USM16SA1 USM32X Digital Voice Recorder: ICD-UX502/...

Creating Library or Creating Database on the USB device has disappeared. [61] Enjoying Video and Sound Playing content from a USB device Notes on USB devices Do not remove a USB device during operation. To avoid data corruption and damage to the USB device, turn the receiver off when connecting or r...

The FM screen appears. FM screen You can select and operate each item on the screen by pressing / / / and . A: Frequency indication You can tune to a station automatically by pressing / repeatedly (Auto Tuning). Press to scan from lower to higher frequency stations or press to scan from higher to lo...

You can store stations as follows: FM band: FM 1 to FM 30 [64] Enjoying Video and Sound Listening to the radio Naming preset stations (Name Input) 1. Select [Listen] - [FM TUNER ] from the home menu. 2. Select the preset number to which you want to assign a name. 3. Press OPTIONS . The options menu ...

[68] Enjoying Video and Sound Enjoying sound effects Resetting sound fields to the default settings Be sure to use the buttons on the receiver to perform this operation. 1. Turn off the receiver. 2. Hold down MUSIC and press (on/standby) on the receiver. [S.F. CLEAR] appears on the display panel and...

Note This function does not work in the following cases: [Analog Direct] is being used. [Pure Direct] is set to [On]. [Bluetooth Mode ] is set to [Transmitter]. Frequencies for [Bass] and [Treble] are fixed. Depending on the audio format, the receiver may play signals at a lower sampling frequency t...

frequency of the input signals, depending on the audio format. Hint You can also select [Sound Optimizer] in [Sound Effects] from the home menu. [71] Enjoying Video and Sound Enjoying sound effects Enjoying more natural sound with speakers installed inthe ceiling (In-Ceiling Speaker Mode) Set whethe...

[72] Enjoying Video and Sound Enjoying sound effects Enjoying high-fidelity sound (Pure Direct) You can enjoy higher-fidelity sound from all inputs using the Pure Direct function. When the Pure Direct function is on, the display panel lights off to suppress noise that affects sound quality. 1. Selec...

You can connect the receiver directly with a device that supports Screen mirroring (e.g. a smartphone, or a tablet) and display the screen of the device on your large TV screen. No wireless router (or access point) is required to use this feature. 1. Press MIRRORING. You can also select [Watch] - [S...

You can also enjoy audio services such as internet radio by connecting internet. You can also control this receiver from a smartphone by using the compatible apps. AirPlay This receiver supports AirPlay. You can enjoy audio content from an iPhone/iPad/iPod or your iTunes Library. Enjoying audio cont...

Enjoying music services offered on the Internet [75] Using Network Features Setting up a wired LAN connection (for wired LAN connections only) Connecting the receiver to the network using a LANcable (for wired LAN connections only) The following illustration is an example configuration of a home net...

The screen for selecting the IP address acquisition method appears on the TV screen. 4. Select [Auto]. The system starts connecting to the network. The confirmation screen appears. 5. Press / to browse information, and then press . 6. Select [Save & Connect]. The system starts connecting to the ...

Server (computer, etc.) Router Modem Internet Note Audio playback on a server may occasionally be interrupted if you use a wireless connection. When using Screen mirroring, BLUETOOTH TX or BLUETOOTH RX function, stand up both wireless LAN antennas for better performance. [78] Using Network Features ...

Server (computer, etc.) 1. Select [Listen] - [Home Network] from the home menu. A list of available servers appears on the TV screen. If the last selected item (playlist, album, folder, etc.) appears on the TV screen, press BACK to return to the server list. If there are no available servers, press ...

this receiver via a wireless network. PC iPhone/iPad/iPod 1. Tap/click icon on the iPhone/iPad/iPod screen or iTunes window. 2. Select [STR-DN1060 XXXXXX ] (*) or [STR-DN860 XXXXXX ] (*) on the AirPlay menu of iTunes or your iPhone/iPad/iPod. 3. Start playing back audio content on an iPhone/iPad/iPo...

use the SongPal Link function. 1. Download the “SongPal” application to your mobile device. 2. Run “SongPal” and follow the on-screen instructions. 3. Connect your mobile device to the receiver using the NFC function or by manual operation. After the connection is completed, you can control the rece...

before you use TV SideView for the first time. Search for TV SideView on Google Play or the App Store and download to your mobile device. 1. Download TV SideView app to your mobile device. 2. Turn on the receiver and then connect it to the same network as your mobile device. 3. Turn on TV SideView, ...

3. Select the device you want to delete and press OPTIONS . 4. Select [Remove] from the options menu. 5. Select [OK ]. The selected device is deleted from the device list. [94] Using BLUETOOTH Features About BLUETOOTH Features What you can do with BLUETOOTH features RX (Receiver mode) Listening to t...

Adjust the volume of the BLUETOOTH device first. If the volume level is still too low, adjust the volume level of the receiver. Compatible smartphones Smartphones with the NFC function (compatible OS: Android 2.3.3 or later, excluding Android 3.x) Note This function does not work when [Bluetooth Mod...

* If you press when no BLUETOOTH device is connected, the receiver automatically connects to the last connected BLUETOOTH device. Note These operations may not be available for certain BLUETOOTH devices. The actual operations may also differ depending on the connected BLUETOOTH device. The RX/TX but...

1. Download the “SongPal” application to your mobile device. 2. Run “SongPal” and follow the on-screen instructions. 3. Connect your mobile device to the receiver using the NFC function or by manual operation. After the connection is completed, you can control the receiver using “SongPal.” Note “Son...

located in another room to the SURROUND BACK/BI -AMP/FRONT HIGH/FRONT B/ZONE 2 terminals. For example, you can listen to the same music from an AV device located in the living room in both the living room and kitchen, or watch a movie in the living room while music from a different device is played ...

HDMI zone You can enjoy movies and music in another room by connecting a TV or different AV receiver located in another room to the HDMI OUT B/HDMI ZONE terminals. For example, movies or music from an AV device located in the living room can be played at high quality in a bedroom. Note There are res...

Source signal from the HDMI IN BD/DVD jack SAT/CATV: Source signal from the HDMI IN SAT/CATV jack Source signal from the VIDEO/AUDIO IN SAT/CATV jacks Source signal from the COMPONENT VIDEO IN SAT/CATV jacks Source signal from the OPTICAL IN 1 (SAT/CATV) jack GAME: Source signal from the HDMI IN GAM...

SAT/CATV: Source signal from the AUDIO IN SAT/CATV jacks VIDEO 1: Source signal from the AUDIO IN VIDEO 1 jacks SA-CD/CD: Source signal from the AUDIO IN SA-CD/CD jacks FM TUNER: FM broadcasts received through the built-in tuner USB (*): Source signal from the (USB) port on the front panel Bluetooth...

Follow the procedure below after connecting the speakers installed in Zone 3 to the SURROUND/ZONE 3 terminals of the receiver. 1. Select [Setup] - [Speaker Settings] from the home menu. 2. Select [Speaker Pattern]. 3. Select one of the following speaker patterns displayed on the TV screen: 3/0.1, 3/...

If [2. xxxx (input name)] or [3. xxxx (input name)] disappears in step 3, press ZONE SELECT again. To exit zone operation Press ZONE SELECT on the receiver repeatedly to select the zone you want to exit, then press ZONE POWER. Available input for zone operations See “Available inputs for each zone (...

You can enjoy sound from the receiver in Zone 2 by the following procedure. 1. Turn on the amplifier in Zone 2. 2. Press ZONE SELECT on the receiver repeatedly to select Zone 2. 3. Press ZONE POWER on the receiver. Zone 2 is activated. 4. Select the source signals you want to output using INPUT SELE...

work. For details on selecting the HDMI zone input, see “4. Enjoying video and sound in another location by connecting another amplifier or TV using HDMI connections (HDMI zone) (for STR-DN1060 only).” [114] Using the Multi-Zone Features (for STR-DN1060 only) Enjoying video and sound in another room...

another room using a TV or another receiver (for STR-DN1060 only) 4. Enjoying video and sound in another location byconnecting another amplifier or TV using HDMIconnections (HDMI zone) (for STR-DN1060 only) You can enjoy sound from the receiver in the HDMI zone by following the steps below. 1. Turn ...

The “BRAVIA” Sync function allows communication between Sony products such as TVs, Blu -ray Disc players, DVD players, and AV amplifiers that support the Control for HDMI function. Control for HDMI is a mutual control function standard used by HDMI CEC (Consumer Electronics Control) for HDMI (High -...

[122] Using Other Features Interlocking with BRAVIA TV and other devices (“BRAVIA” Sync) About Home Theatre Control If a Home Theatre Control-compatible TV is connected to the receiver, an icon for Internet based applications appears on the connected TV. You can switch an input of the receiver or sw...

By connecting an MHL device with an MHL cable (not supplied), you can use One -Touch Play and Remote Easy Control. These functions allow communication with Sony “BRAVIA” Sync-compatible TVs using an HDMI cable (not supplied). Note These functions may not work depending on the connected MHL device. O...

1. Turn on the receiver and the two monitors. 2. Press HDMI OUTPUT. Each time you press the button, the output will be switched as follows: HDMI A - HDMI B - HDMI A+B - HDMI OFF Note [HDMI A+B] may not work if the compatible video formats of the monitors connected to the HDMI OUT A (TV) jack and the...

Depending on the input, [Input Mode ] may be dimmed on the TV screen and other modes cannot be selected. When [Analog Direct] is being used, audio input is set to [Analog]. You cannot select other modes. Hint You can also use INPUT SELECTOR on the receiver to select the input in step 1. [127] Using ...

OPT 2: STR-DN1060: BD/DVD, GAME , SAT/CATV , VIDEO 1, VIDEO 2, SA-CD/CD STR-DN860: BD/DVD, GAME , SAT/CATV , VIDEO, SA-CD/CD COAX : STR-DN1060: BD/DVD, GAME , SAT/CATV , VIDEO 1, VIDEO 2, SA-CD/CD (*) STR-DN860: BD/DVD, GAME , SAT/CATV , VIDEO, SA-CD/CD (*) None: STR-DN1060: BD/DVD (*), GAME (*), SA...

1. Select [Custom Preset ] from the home menu. 2. Press OPTIONS with a preset for which you want to edit settings among from [1: Movie], [2: Music], [3: Party] or [4: Night] selected. 3. Select the menu you want from the options menu. Edit : Allows you to customize and save the settings to suit your...

Surround Bass: – Surround Treble: – Front High Bass: – Front High Treble: – [132] Using Other Features Using the sleep timer Using the sleep timer (Sleep) You can set the receiver to turn off automatically at a specified time. 1. Select [Setup] - [System Settings] from the home menu. 2. Select [Slee...

1. Select the input for which you want to check information. 2. Press DISPLAY MODE on the receiver repeatedly. Each time you press DISPLAY MODE, the display will change cyclically as follows: Index name of the input (*1) - Input you selected - Sound field currently applied (*2) - Volume level - Stre...

Note Auto Calibration is not available when [Bluetooth Mode ] is set to [Transmitter]. The speakers emit very loud sound during the calibration and the volume cannot be adjusted. Be considerate of your neighbors and any children who are present. If the muting function has been activated before you p...

The indicators on the display panel shows which set of terminals are selected. SP A : Speakers connected to the SPEAKERS FRONT A terminals. SP B (*) : Speakers connected to the SPEAKERS SURROUND BACK/BI -AMP/FRONT HIGH/FRONT B terminals. SP A+B (*) : Speakers connected to both the SPEAKERS FRONT A a...

2. Follow the instructions on the TV screen and then press to select [Start]. The measurement starts in five seconds. The measurement process will take approximately 30 seconds with a test tone. When the measurement ends, a beep sounds and the screen switches. 3. Select the item you want. Save: Save...

This function does not work in the following cases: [Analog Direct] is being used. Headphones are connected. [Auto Calibration] has not been performed. [Bluetooth Mode ] is set to [Transmitter] The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the inpu...

Note [Size ] cannot be set in the following cases: Headphones are connected. [Bluetooth Mode ] is set to [Transmitter]. Hint The surround back speakers will be set to the same setting as that of the surround speakers. When the front speakers are set to [Small ], the center, surround, and surround ba...

You can adjust the level of each speaker (front left/right, front high left/right, center, surround left/right, surround back left/right and subwoofer). 1. Select [Setup] - [Speaker Settings] from the home menu. 2. Select [Level ]. 3. Select the speaker on the screen for which you want to adjust the...

[Bluetooth Mode ] is set to [Transmitter]. [153] Adjusting Settings Speaker Settings Selecting the unit of measurement (Distance Unit) You can select the unit of measurement for setting distances. 1. Select [Setup] - [Speaker Settings] from the home menu. 2. Select [Distance Unit]. 3. Select the set...

[156] Adjusting Settings Audio Settings Selecting a sound field (Sound Field) You can select from a variety of sound field modes according to speaker connections or input sources. 1. Select [Setup] - [Audio Settings] from the home menu. 2. Select [Sound Field]. 3. Select the sound field you want. Fo...

available only when the monitor supports the A/V Sync function. 0 ms – 300 ms : You can adjust the delay from 0 ms to 300 ms in 10 ms intervals. Note The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals, depending on the audio format. Th...

Volume) This receiver can adjust its volume automatically depending on the input signal or content from a connected device. This function is useful, for example, when the sound of commercials is louder than a TV program. 1. Select [Setup] - [Audio Settings] from the home menu. 2. Select [Advanced Au...

[165] Adjusting Settings Audio Settings Compressing the dynamic range (Dynamic RangeCompressor) You can compress the dynamic range of the soundtrack. This may be useful when you want to watch movies at a low volume late at night, etc. This function only works for Dolby Digital and Dolby TrueHD sourc...

If your Sony device is not detected when [Auto1] is selected, the setting will have the same effect as the [Auto2] setting. The [4K Output ] setting does not affect video signals from the HDMI IN jacks. If you want to upscale video signals from the HDMI IN jacks to 4K, use [HDMI In 4K Scaling] in HD...

2. Select [HDMI Deep Color Output ]. 3. Select the setting you want. Auto 12bit: Outputs 12bit video signals if the connected TV is compatible with Deep Color. 10bit: Outputs 10bit video signals if the connected TV is compatible with Deep Color. Off : Select this if the picture is unstable or the co...

Upscaling video signals to 4K (HDMI In 4K Scaling) You can upscale video signals to 4K and output them through the HDMI OUT jacks of the receiver. 1. Select [Setup] - [HDMI Settings] from the home menu. 2. Select [HDMI In 4K Scaling]. 3. Select the setting you want. Auto: Enables video scaling contr...

[174] Adjusting Settings HDMI Settings Passing HDMI signals through (Standby Through) You can output HDMI signals to the TV even when the receiver is in standby mode. 1. Select [Setup] - [HDMI Settings] from the home menu. 2. Select [Standby Through]. 3. Select the setting you want. Auto: The receiv...

2. Select [Audio Out]. 3. Select the setting you want. AMP: HDMI audio signals from playback devices are only output to the speakers connected to the receiver. Multi-channel sound can be played back as it is. TV + AMP: The sound is output from the speaker of the TV and the speakers connected to the ...

only) If you select [Off], it takes more time for images to appear after switching the input. However, the sound quality is improved because the receiver receives signals only from the selected HDMI input jack. [180] Adjusting Settings HDMI Settings Automatically switching the input when an MHL devi...

See [Network Connection Status] when checking the network settings. [184] Adjusting Settings Network Settings Setting up a wireless LAN connection Before performing network settings When your wireless LAN router (access point) is Wi-Fi Protected Setup (WPS) -compatible, you can easily set the networ...

If using a (WPS) PIN code Select [New connection registration ] - [(WPS) PIN Method] in step 4, then follow the on- screen instructions. Hint See [Network Connection Status] when checking the network connection status. [185] Adjusting Settings Network Settings Checking the network connection status ...

[194] Adjusting Settings Bluetooth Settings Selecting the BLUETOOTH mode (Bluetooth Mode) You can enjoy contents from remote devices on this receiver or listen to sound from this receiver on other devices such as headphones. 1. Select [Setup] - [Bluetooth Settings] from the home menu. 2. Select [Blu...

[195] Adjusting Settings Bluetooth Settings Checking the BLUETOOTH device list (Device List) You can check a list of the paired and detected BLUETOOTH receivers when [Bluetooth Mode ] is set to [Transmitter]. You can perform pairing with detected devices from the list. 1. Select [Setup] - [Bluetooth...

up in amber if the power for Zone 2/Zone 3/HDMI zone is turned on. Hint You can also turn the power for Zone 2/Zone 3/HDMI zone on or off using ZONE POWER on the receiver. [200] Adjusting Settings Zone Settings (for STR-DN1060 only) Selecting source signals for Zone 2/Zone 3/HDMI zone(Input) (for ST...

1. Select [Setup] - [Zone Settings] from the home menu. 2. Select [Zone2 Volume ] or [Zone3 Volume ]. 3. Select the volume level. Note If [Zone2 Line Out] is set to [Fixed ], adjust the volume using the receiver in Zone 2. Hint You can also adjust the volume using ZONE SELECT and MASTER VOLUME on th...

when it is detected from a device connected to the same network. 1. Select [Setup] - [System Settings] from the home menu. 2. Select [Quick Start/Network Standby]. 3. Select the setting you want. On Off [206] Adjusting Settings System Settings Setting standby mode (Auto Standby) You can set the rece...

Turn the receiver on or off. [209] Adjusting Settings System Settings Receiving information on newer software (SoftwareUpdate Notification) You can set whether or not to be informed of newer software version information on the TV screen. 1. Select [Setup] - [System Settings] from the home menu. 2. S...

Following histories will be erased. Connected BLUETOOTH devices Mobile devices connected using the Screen mirroring function Content input with the on-screen keyboard [211] Adjusting Settings System Settings Assigning a name to the receiver (Device Name) You can assign a device name to the receiver ...

Checking software license information (Software LicenseInformation) You can display the software license information. 1. Select [Setup] - [System Settings] from the home menu. 2. Select [Software License Information ]. 3. Follow the on-screen instructions. [214] Adjusting Settings System Settings Up...

Characters or marks in some languages may not be displayed. [218] Adjusting Settings Reverting to the factory default settings Reverting to the factory default settings You can clear all memorized settings and restore the receiver to the factory default settings by the following procedure. This proc...

Warning 41, Warning 42 : The input from the microphone is too large. The distance between the speaker and the microphone may be too small. Set them further apart and perform the measurement again. Warning 43 : The distance and position of a subwoofer cannot be detected. This may be caused by noise. ...

Check that MASTER VOLUME on the receiver is not set to [VOL MIN]. Check that SPEAKERS on the receiver is not set to [SPK OFF]. Check that headphones are not connected to the receiver. Press to cancel the muting function. Try pressing the input button on the remote control or turning INPUT SELECTOR o...

devices require both L and R jack connections. Use an audio cable (not supplied). Adjust the speaker level. Check that the speaker settings are appropriate for the setup using [Auto Calibration] or [Speaker Pattern] in the Speaker Settings menu. Then check that sound is output from each speaker corr...

Settings menu to: [TV + AMP] if you want to listen to the sound from the TV speaker and receiver. [AMP ] if you want to listen to the sound from the receiver only. When you connect the receiver to a video device (projector, etc.), sound may not be output from the receiver. In this case, set [Audio O...

4. Select [FM Mode ] from the menu. 5. Select [Monaural]. Note You can set FM mode in the options menu if the frequency indication is selected in step 3. [243] Troubleshooting Tuner You cannot tune to radio stations. Check that the antennas (aerials) are connected securely. Adjust the antennas (aeri...

The service may be temporarily out of order. Contact the radio station and find out whether they actually provide the service in question. [246] Troubleshooting iPhone/iPad/iPod The sound is distorted. Press - on the remote control repeatedly. You can also use MASTER VOLUME on the receiver. [247] Tr...

[250] Troubleshooting iPhone/iPad/iPod The ringtone volume of an iPhone does not change. Adjust the ring volume using the controls on the iPhone. [251] Troubleshooting USB devices Are you using a compatible USB device? If you connect an incompatible USB device, the following problems may occur. The ...

MP3 files in MP3 PRO format cannot be played. The audio file is a multiple track audio file. Some AAC files may not be played correctly. If you use a partitioned USB device, only audio files on the first partition can be played. Playback is possible up to nine levels (including the [ROOT ] folder). ...

Audio content with DRM (Digital Rights Management) copyright protection cannot be played on this receiver. [269] Troubleshooting Home Network Cannot select a previously selected track. The track information may have been changed on the server. Refresh the server list and then reselect the server. [2...

network. The receiver itself does not support the Wake-on-LAN. Set [Remote Start] to [On] if you want to turn the receiver on by operating the devices on a network. [272] Troubleshooting AirPlay The receiver cannot be found from an iPhone/iPad/iPodor iTunes. Make sure the iPhone/iPad/iPod or compute...

DN1060 only). Make sure the HDMI OUTPUT setting is set to [HDMI A] or [HDMI A + B] (for STR- DN1060 only). [284] Troubleshooting “BRAVIA” Sync (Control for HDMI) TV sound cannot be heard from the speakers connectedto the receiver. Make sure [Control for HDMI] is set to [On] in the HDMI Settings menu...

Be sure to use an authorized MHL cable that bears the MHL logo. * For STR-DN1060 only [287] Troubleshooting Remote control The remote control does not function. Point the remote control at the remote control sensor on the receiver. Remove any obstructions between the remote control and the receiver....

1. Turn off the receiver. 2. Hold down MUSIC and press (on/standby) on the receiver. [S.F. CLEAR] appears on the display panel and all sound fields are reset to their default setting. [290] Troubleshooting If the problem is not solved Customer support websites Refer to the following websites for the...

here: https://developer.spotify.com/esdk-third -party-licenses/ Spotify and Spotify logos are trademarks of the Spotify Group. All other trademarks and registered trademarks are of their respective holders. In this manual, ™ and ® marks are not specified. This product contains software that is subje...

channel surround formats are downmixed to 2-channels. Analog Direct (A. DIRECT): You can switch the audio of the selected input to 2-channel analog input. This function enables you to enjoy high -quality analog sources. Only the volume and front speaker level can be adjusted when using this function...

Portable Audio (PORTABLE): Upscales existing sound sources to near hi-resolution sound quality with DSEE HX. This sound field makes you feel as if you are really at the recording studio or concert. DSEE HX only works on 2-channel sound sources with a sampling frequency of 44.1 kHz or 48 kHz. However...

BLUETOOTH device name - Sound field currently applied - Volume level - Input you selected Menu list (on the display panel) The following options are available in each menu. Auto Calibration settings [<AUTO CAL >] Auto Calibration start [A.CAL START] Auto Calibration type [CAL TYPE] (*1) FULL F...

LH -10.0 dB to LH +10.0 dB (0.5 dB interval) Front right high speaker level [RH LEVEL] (*2) RH -10.0 dB to RH +10.0 dB (0.5 dB interval) Subwoofer Level [SW LEVEL] (*2) SW -10.0 dB to SW +10.0 dB (0.5 dB interval) Speaker settings [<SPEAKER>] Speaker pattern [SP PATTERN] 5/2.1 to 2/0 (20 patte...

speakers. (i.e. 3/0.1, 3/0, 2/0.1, 2/0) *6 You can only select this parameter if [ SP PATTERN ] is not set to a pattern with surround back and front high speakers. (i.e. 3/2.1, 3/2, 2/2.1, 2/2, 3/0.1, 3/0, 2/0.1, 2/0) *7 You can only select this parameter if the speaker is set to [ SMALL ]. *8 You c...

4. Adjust the speaker level using MASTER VOLUME on the receiver. Available speakers: FL/FR (Front Left/Front Right) FL/CNT (Front Left/Center) CNT/FR (Center/Front Right) FR/SR (Front Right/Surround Right) SR/SBR (Surround Right/Surround Back Right) SR/SB (Surround Right/Surround Back) SBR/SBL (Surr...

The menu is displayed on the display panel of the receiver. 2. Select [<LEVEL>] (Level settings) - [P. AUDIO]. 3. Select the speakers to output the sound from. The front 2 channel source sound is output sequentially from adjacent speakers. 4. Adjust the speaker level using MASTER VOLUME on the...