Sony MZ-E10 - Manuals - manualsarea.com

Page 4 - Playing an MD

4 MZ-E10 SECTION 2 GENERAL This section is extracted frominstruction manual. The Player 1 2 7 8 9 E CD 6 1 i (Headphones/earphones) jack 2 GROUP button 3 “3-color info-LED” 4 HOLD (Locking the control) switch 5 5-way control key ( . • > N * • x •VOL +, –) 6 OPEN switch 7 BUILT-IN BATTERY switch (...

Page 5 - Claw; Mechanism deck

5 MZ-E10 SECTION 3 DISASSEMBLY Note : Follow the disassembly procedure in the numerical order given. 3-1. PANEL ASSY (S), UPPER r The equipment can be removed using the following procedure. 6 4 1 Two screws (M1.4) 7 Panel ASSY (S), upper 2 Claw Holder ASSY 3 Claw 5 Bracket ASSY Panel ASSY (S), upper...

Page 9 - Manual; A A A S 3 F; L r e f p w 3 F

MZ-E10 9 2. During each test, press and hold down > key or . key for a while to move the optical pickup on the sled outer orinner perimeter. 3. Each test item is assigned with a three-digit item number. The 100th place is a major item, 10th place is a middle item, and unitplace is a minor item. N...

Page 10 - DISPLAY; SET

MZ-E10 10 4-6. KEY CHECK MODE 4-6-1. Outline of the function This mode is used to check to make sure that each of the keys(including the slide switch) on the set operates normally. 4-6-2. Setting the Key Check mode 1. Set the TEST MODE. Press and hold down DISPLAY key (for more than 2 sec) to set th...

Page 11 - Reset; FF

11 MZ-E10 SECTION 5 ELECTRICAL ADJUSTMENTS 5-1. GENERAL In this set, CD and MO discs can be automatically adjusted by set-ting the Overall Adjustment mode within the TEST MODE,Before performing these automatic adjustments, it is necessary toclear the memory, adjust the power charge and temperature i...

Page 12 - FC; XX

12 MZ-E10 12.Press the key. (Address section starts flashing.) LCD display 862 88D3 FC This section (address) flashes. 13.Press the key to return to Manual mode. LCD display 862 VarWrt 00 14.Press the key and write in the correction data. 15. Press the > key and 862 as the item number. LCD displa...

Page 13 - Cls D XX

13 MZ-E10 Adjustment value:1.05VStandard value:1.04 to 1.055V MAIN BOARD (SIDE A) C908 C922 C926 C202 37 L904 C910 C916 C C R908 R921 R911 912 1-686-492- TP908 (REG 1) TP908 (REG1) digital voltmeter 5. Press key to write the adjustment value, item No.will change to 742. 5-4-3. VC1 adjustment method ...

Page 14 - ADJ OK; ChgIOf XX; ChgV H XX

14 MZ-E10 Adjustment value:1.75VStandard value:1.75 to 1.80V MAIN BOARD (SIDE A) C302 E 1 7 14 8 D D D IC301 C301 C104 C204 R317 R318 R818 R819 t HOLD TP909(CLASS-D) TP909 (CLASS-D) digital voltmeter 3. Press key to write the adjustment value, LCD display. 000 ADJ OK 4. Press the x key and return to...

Page 15 - ChgI L XX; NvWrt CC; AdjTmp XX; Assy

15 MZ-E10 5-5-5.Current Amplifier (L) adjustment method 1. Connect TP953 to TP959 on the main board.2. Set the test mode.3. Set the Manual mode and set the item No. to 752. LCD display 752 ChgI L XX 4. Press key to write the adjustment value. 5-5-6. Adjustment value change method 2 (when using Versi...

Page 17 - -8-1 Method for rewriting the corrected data; PatClr CC; Patch CC; Patch DD

17 MZ-E10 2 . Overall MO adjustment items Item No. Contents 112 ALFA offset adjustment 113 IJ offset adjustment 114 FE offset adjustment 118 AW DW OFFSET 224 TE offset adjustment 221 TE gain adjustment 224 TE offset adjustment 236 ABCD gain adjustment 237 KF gain adjustment 238 RF gain adjustment 24...

Page 20 - Semiconductor; See page 25 for Notes.

MZ-E10 20 20 D101 E-9 D201 E-9 D301 F-9 D801 B-9 D802 B-9 D803 B-9 D851 E-9 D902 G-6 D903 G-6 D904 G-7 D951 G-3 IC301 B-9 IC302 D-9 IC501 D-8 IC551 G-9 IC601 G-4 IC801 G-5 IC901 G-7 IC951 F-2 IC952 C-8 Q102 F-9 Q202 F-9 Q301 C-9 Q302 D-9 Q303 F-9 Q304 E-8 Q501 D-8 Q802 C-9 Q901 G-7 Q902 H-5 Q903 G-6...

Page 25 - WAVEFORMS

25 MZ-E10 r WAVEFORMS 1 IC601 (R606) XOUT 2 IC901 qdqf L1 Note on Schematic Diagram • All capacitors are in µ F unless otherwise noted. pF: µµ F 50 WV or less are not indicated except for electrolyticsand tantalums. • All resistors are in Ω and 1 / 4 W or less unless otherwise specified. Note on Pri...

Page 35 - MAIN

35 MZ-E10 NOTE : • Due to standardization, replacements in the parts list may be different from the partsspecified in the diagrams or the componentsused on the set. • -XX, -X mean standardized parts, so they may have some difference from the originalone. • RESISTORS All resistors are in ohmsMETAL : ...

Page 38 - CONTROL

38 MZ-E10 Ref. No. Part No. Description Remark R814 1-218-961-11 RES-CHIP 4.7K 5% 1/16W R815 1-218-965-11 RES-CHIP 10K 5% 1/16W R816 1-218-965-11 RES-CHIP 10K 5% 1/16W < SWITCH > S801 1-786-401-21 SWITCH, TACTILE ( . , > N , x , VOL–, VOL+) **************************************************...

Page 39 - MEMO

Page 40 - REVISION HISTORY; Date

REVISION HISTORY Clicking the version allows you to jump to the revised page.Also, clicking the version at the upper right on the revised page allows you to jump to the next revisedpage. Ver. Date Description of Revision 1.0 2002.11 New MZ-E10