Sony MVE-8000A - Manuals - manualsarea.com

Page 5 - Table of Contents; Manual Structure

1 MVE-8000A Table of Contents Manual Structure Purpose of this manual .............................................................................................. 2 Related manuals ......................................................................................................... 2 Contents ...

Page 6 - Maintenance Manual (Available on request); Contents; This manual is organized by following sections.; Section 1; Trademark; Registered trademark used in this manual is follows.

2 MVE-8000A Purpose of this manual This manual is the installation manual of DME Processor Pack MVE-8000A-C andtheir optional boards and units. This manual is intended for use by trained system and service engineers, anddescribes the information on installing the MVE-8000A-C system. Related manuals ...

Page 7 - Prohibited locations for installation

1-1 MVE-8000A Section 1 Installation 1-1. Operating Environment Operating guaranteed temperature : + 5 d C to + 40 d C Performance guaranteed temperature : + 10 d C to + 35 d C Operating humidity : 10 % to 90 % (relative humidity) Storage temperature : _ 20 d C to + 60 d C Mass (when all options are...

Page 8 - If you have questions on the use of the above Power Cord/

1-2 MVE-8000A For customers in the all European countries 1 Power cord, 250 V 10 A (2.4 m) : ! 1-782-929-12 1 AC inlet 1-2-2. Recommended Power Cord This unit does not come with a power cord.To get a power cord, please contact your local Sony Sales Office/Service Center. w. Use the approved Power Co...

Page 10 - Model name; Be sure to turn off the POWER switch and unplug the; Installation procedure; Turn off the main power of the MVE-8000A and

1-4 MVE-8000A Screws(with drop-safe) Front door assembly Screws(with drop-safe) 1-4. Installing the Options The MVE-8000A-C is shipped from the factory with thenecessary option (refer to the following table) already installed in the MVE-8000A, in accordance with thespecified system configuration. MV...

Page 11 - Name of option; Slot; Attach the plug-in board loose-proof assembly and the

1-5 MVE-8000A Eject lever Plug-in board Plug-in board Eject lever Eject levers Plug-in board 4. While the eject levers are kept open as shown in theillustration, insert the plug-in board into the board guide rails. Name of option Name of board Slot on the front side MKE-8040A DVP-30A board * 1 2, 3 ...

Page 12 - The board slot

1-6 MVE-8000A B3 x 5 Cover panel(Slot 2) B3 x 5 Cover panel Slot 1 1-4-2. Installing the Connector Board The board slot Name of option Name of board Slot on the rear side MKE-8020A CN-2153 board 1 Installation procedure Parts required (Supplied accessory of MKE-8020A) . Connecting cable . Cable hold...

Page 19 - -8. Checks on Completion of Installation; A side/Component side

1-13 MVE-8000A 1-8. Checks on Completion of Installation 1-8-1. On-board Switches Setting and LED Functions n The number shown in parentheses ( ) indicates the address on the circuit board. 1. CA-54CFC board (MVE-8000A) <LED>D4 (A-1) : + + + + + 3.3 V + + + + + 3.3 V power supply status indica...

Page 26 - 2 V check terminal

1-20 MVE-8000A <Connector>CN1501 (C1) : ISP common connector Used for writing a program in the JTAG device with ISP inthe production process. <TEST terminals>E201 (F1), E301 (E1), E401 (G2), E501 (A6),E502 (A1), E503 (D6), E504 (D3), E505 (G5),E506 (F3) : GND terminals Used as ground ter...

Page 31 - The monitor picture is not displayed correctly.; Section 2

2-1 MVE-8000A Flow2 The monitor picture is not displayed correctly eventhough the main power of the MVE-8000A is turned on. Are the plug-in boards inserted into their correct slots? Are the option boards inserted into their correct slots? Are the input and output cables connected correctly? Insert t...

Page 32 - operating temperature.; The filter on the rear of the front door assembly can easily; Fan; information on cleaning the fan.

2-2 MVE-8000A Front door assembly Filters 2-3. About the Data Backup Capacitor A large capacitor is installed on the CA-54CFC board inorder to backup the memory storing the setup and other data in the MVE-8000A. Leave the main power of theMVE-8000A turned on for an hour or longer in order to charge ...

Page 34 - Printed in Japan; Sony Corporation