Sony LMD-2110W - Manuals

Precaution 6 Precaution On Safety • Operate the unit only with a power source as specified in the “Specifications” section. • A nameplate indicating operating voltage, etc., is located on the rear panel. • Should any solid object or liquid fall into the cabinet, unplug the unit and have it checked b...

Precaution 7 On Cleaning Before cleaning Be sure to disconnect the AC power cord from the AC outlet. On cleaning the monitor screen The monitor screen surface is especially treated to reduce reflection of light.As incorrect maintenance may impair the performance of the monitor, take care with respec...

Features 8 Features The LMD-2110W (21.5-type) is a multiple format LCD monitor for broadcast/professional use featuring a precise image and high performance. Supporting digital/analog main broadcast signals, and HDMI 1) input, it can be used under various lighting conditions. 1) HDMI, the HDMI logo ...

Location and Function of Parts and Controls 9 Location and Function of Parts and Controls Front Panel a Tally lamp You can check the status of the monitor by the color of the tally lamp.The tally lamp lights in red, green or amber according to the setting of the REMOTE menu. b 1 (standby) switch and...

Location and Function of Parts and Controls 10 m LINE button Press to monitor the signal through the LINE input connector. n Speaker The audio signal selected by the input select button ( j SDI button, k RGB/COMPONENT button, l HDMI button or m LINE button) on the front panel is output. Input Signal...

Location and Function of Parts and Controls 11 Rear Panel a HDMI IN connector HDMI (High-Definition Multimedia Interface) is an interface that supports both video and audio on a single digital connection, allowing you to enjoy high quality digital picture and sound. The HDMI specification supports H...

Installing to the Rack 12 audio input/output jacks on equipment such as a VCR. g PARALLEL REMOTE connector (modular connector, 8-pin) Forms a parallel switch and controls the monitor externally. For details on the pin assignment and factory setting function assigned to each pin, see page 24. CAUTION...

Connecting the AC Power Cord / Attaching the Input Adaptor 13 Connecting the AC Power Cord 1 Plug the AC power cord into the AC IN socket on the rear panel. Then, attach the AC plug holder (supplied) to the AC power cord. 2 Slide the AC plug holder over the cord until it locks. To disconnect the AC ...

Selecting the Default Settings 14 Selecting the Default Settings When you turn on the unit for the first time after purchasing it, select the area where you intend to use this unit from among the options. The default setting values for each area 1 Press the 1 (standby) switch. The power is turned on...

Selecting the Menu Language 15 2 If LATIN AMERICA is selected: 4 If ASIA EXCEPT JAPAN is selected: Customers who will use this unit in the shaded areas shown in the map below should select NTSC AREA.Other customers should select PAL AREA. 3 Press the M or m button to narrow the area further and then...

Using the Menu 16 The setting items (icons) in the selected menu are displayed in yellow. 4 Press the M or m button to select “LANGUAGE,” then press the , or ENTER button. The selected item is displayed in yellow. 5 Press the M or m button to select a language, then press the , or ENTER button. The ...

Adjustment Using the Menus 17 3 Select an item. Press the M or m button to select the item, then press the , or ENTER button. The item to be changed is displayed in yellow. Note If the menu consists of multiple pages, press M or m button to go to the desired menu page. 4 Make the setting or adjustme...

Adjustment Using the Menus 18 MARKER SELECTCENTER MARKERSAFETY AREAMARKER LEVEL REMOTE PARALLEL REMOTE 1PIN2PIN3PIN4PIN6PIN7PIN8PIN KEY INHIBIT KEY INHIBIT Adjusting and Changing the Settings STATUS menu The STATUS menu is used to display the current status of the unit. The following items are displ...

Adjustment Using the Menus 19 USER CONTROL menu The USER CONTROL menu is used for adjusting the picture.Items that cannot be adjusted depending on the input signal are displayed in black. For details of input signal and adjustable / setting items, see page 10. USER CONFIG menu The USER CONFIG menu i...

Adjustment Using the Menus 21 Scan mode image MARKER SETTING REMOTE menu Select the PARALLEL REMOTE connector pins for which you want to change the function. You can assign various functions to 1 to 4 pins and 6 to 8 pins. The following lists the functions you can assign to the pins. REMOTE • – – – ...

Troubleshooting 22 • SDI If you use the PARALLEL REMOTE function, you need to connect cables. For more details, see page 24. KEY INHIBIT menu You can lock the setting so that they cannot be changed by an unauthorized user.Select OFF or ON.If you set to ON, all items are displayed in black, indicatin...

Specifications 23 Specifications Picture performance LCD panel a-Si TFT Active Matrix Picture size 21.5 type477 × 268, 547 mm(W/H, Diagonal)(18 7 / 8 × 10 5 / 8 , 21 5 / 8 inches) Resolution 1920 × 1080 dots Viewing angle (LCD panel specifications) (up/down/left/right, contrast > 10:1)80°/80°/85°...

Specifications 24 HD/SD-SDI input adaptor BKM- 341HS Design and specifications are subject to change without notice. Pin assignment PARALLEL REMOTE connector Modular connector(8-pin) For details on function allocations, see REMOTE menu (page 21). Wiring required to use the Remote Control Connect the...

Specifications 25 Video signal formats The unit is applicable to the following signal formats. *1 Also supports frame rate 1/1.001. Applicable DVI input signals When a PC signal is input to the HDMI IN connector using a DVI conversion cable Note The sides of the displayed picture may be invisible de...

Dimensions 26 Dimensions Front Rear Side Bottom Mass: Approx. 8.6 kg (18 lb 15 oz) 5 1 5 ( 2 0 3 / 8 ) 162.1 ( 6 1 / 2 ) 192.9 ( 7 5 / 8 ) 238.2 ( 9 1 / 2 ) 2.5 ( 1 / 8 ) 1 0 0 ( 4 ) 38.4(1 9 / 16 ) 100(4) 7 5 . 2 ( 3 ) 9 6 . 8 ( 3 7 / 8 ) 67.7 2 6 4 . 4 ( 1 0 1 / 2 ) 8 6 . 3 ( 3 1 / 2 ) (2 3 / 4 ) ...