Sony FWD-S47H1 - Manuals

3 FWD-S42H 4 Error answer No. Item Value Header 0xE0: Answer 2 Answer * 0x00: No Function Error 0x0: Check Sum Error 0x02: Data Length Error 3 Check Sum 0xXX * 0x00: No Function Error Packet header,category or function code are not included in this protocol. 0x0: Check Sum Error Check sum value of r...

8 FWD-S42H Code Table (1-a) [a]Function [b]Range/Switch Code Command Control Enquiry Standby Power On 0x7E On Screen Logo 0x00 OFF Yes Yes Enable Enable 0x0 ON (Default) 0x02 Reserved 0x7F LED 0x00 OFF Yes Yes Disable Enable 0x0 ON 0x8 Power On Delay 0x00-0x78 sec x Data Yes Yes Enable Enable * : Au...

9 FWD-S42H 6. Priority Signal Select Function (a) Mode Control Syntax Header Category Function Data1 Data2 Check Sum Enquiry 0x83 0x00 Code Table (2-a) [a] Code Table (2-d) 0xFF 0xXX Answer Header Answer Return to Data Size Return Data1 Data2 Check Sum Enquiry 0x70 0x00 0x02 Code Table (2-a) [b] 0xF...

0 FWD-S42H Year Set Syntax Header Category Function Data1 Data2 Check Sum Control 0x8C 0x00 0x7B 0x02 Year: 0x00-0x63 0xXX Syntax Header Category Function Data1 Data2 Check Sum Enquiry 0x83 0x00 0x7B 0xFF 0xFF 0xFC Answer Header Answer Check Sum Control 0x70 0x00 0x70 Completed 0x70 0x0 0x7 Limit Ov...

3 FWD-S42H Player IP Address Syntax Header Category Function Data1 Data2 Check Sum Enquiry 0x83 0x00 0x83 0xFF 0xFF 0x04 Answer Header Answer Check Sum Control 0x70 0x00 0x70 Completed 0x70 0x03 0x73 Command Canceled Answer Header Category Function Data1 Data2 Data3 Data4 Data5 Check Sum Enquiry 0x8...

8 FWD-S42H * 1 Arrangement of Multi Position. Multi Position (2 x 2) Multi Position (1 x 2) Multi Position (2 x 1) Multi Position (3 x 3) Multi Position (1 x 3) Multi Position (3 x 1) Multi Position (4 x 4) Multi Position (1 x 4) Multi Position (4 x 1) 1 2 4 3 1 2 1 2 1 2 5 3 6 4 8 9 7 3 2 1 1 2 3 1...

2 FWD-S42H (d) Soft Version (Main CPU/LAN) Syntax Header Category Function Data1 Data2 Check Sum Enquiry 0x83 0x30 Code Table 0xFF 0xFF 0xB4 (4-k) Answer Header Answer Return to Data Size Return Data1 Return Data2 Check Sum Enquiry 0x70 0x00 Code Table Upper 8bit Data Lower 8bit Data 0xXX Completed ...

27 FWD-S42H1 Section 2 SNMP 1. SNMP FWD-S42H1/S47H1 installs SNMP (Simple Network Management Protocol). SNMP is a standard protocol for network management that was standardized in IETF (Internet Engineer Task Force).By using SNMP, the management information of equipment connected to a network can be...

28 FWD-S42H1 SNMP Setting window (on Web Page) 2. Specifications of SNMP Installation The specifications of the SNMP agent installed in this unit are shown in below. . SNMP version: SNMPv1 . MIB definition: SMIv2 . Support PDU: GetRequesat SetRequest GetNextRequest Trap . Standard MIB to be installe...

29 FWD-S42H1 4-1. Community A Community name is used as the password for SNMP access. The request received from an SNMP man-ager is accepted when the Community name contained in the request coincides with the Community name set. The request is rejected when the former does not coincide with the latt...

30 FWD-S42H1 Editing of Community 1. Select the Community, you want to edit, from a drop-down list.2. Click the [Edit] button. The “Community name”, “Rights”, and “Trap destinations” text boxes, and [Set|To|List] and [Cancel] buttons are validated. Edit the Community name when you want to edit a Com...

31 FWD-S42H1 5. MIB to Be Installed This unit installs MIB-2.MIB-2 is the most representative standard MIB. It is installed in various network products. The statistical information on the amount of network traffic or the number of transmitted and received packets is defined, and the change or transi...

33 FWD-S42H1 ID Talk is set as described below. ID Talk is a protocol for operating the function of this unit via a net-work. 1. Default Setting Item Description Transport TCP Port number 53484 (Factory setting) TCP connection time-out 30 seconds (Factory setting) Section 3 ID Talk

34 FWD-S42H1 Community (4) Command (4) Data (n) Header (2) 0 0 Version (8) Category (8) 1 (Bit position) 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 2. Setting Items The items that can be set to ID Talk are shown in the table below. Item Description Start ID Talk Service Select the check box when using ID Talk. C...

35 FWD-S42H1 0 0 Community (32) 1 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 2 3 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 (Bit position) 0 0 Item No(16) Data Length(8) Request/Response(8) 1 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 2 3 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 (Bit position) 3-2. Community A request is executed when community...

36 FWD-S42H1 Set Data(n byte) 00h Item No. n Request Request Item No. Data Data Length Get Data(n byte) OK(01h) Item No. n Response 01h Item No. 0 Request Request Item No. Data Length Get Data(n byte) OK(01h) Item No. n Response 4. Requests and Responses Requests and responses are described below. 4...

37 FWD-S42H1 Error Code(16) NG(00h) Item No. 2 4-5. ERROR response An NG message is returned as a response when an error occurs in the contents of a request or the result of execution. ERROR response 5. Items Category Contents SET GET 80 ** h Gets the information of this unit O O 90 ** h Gets the ne...

39 FWD-S42H1 6. Error Codes An error code list and its details are shown in the table below. Category Error Error code Item Error (01 ** h) Invalid Item 01h Invalid Item Request 02h Invalid Length 03h Invalid Data 04h Short Data 11h Not Applicable Item 80h Community Error (02 ** h) Different Communi...