Sony External USB - Manuals

Page 2 - English; Trademarks; Pentium is a trademark of Intel Corporation.; Owner’s Record; This label is located on the drive unit’s internal chassis.; Safety Regulations; WA R N I N G; This label is located on the bottom of the drive unit enclosure.

This unit uses CD-R discs and CD-RW discs with the following mark. This unit uses CD-ROM discs with the following mark. When you use this unit as a CD player, use compact discs with the following mark. You are cautioned that any changes or modifications not expressly approved in this manualcould voi...

Page 3 - Introduction; Features; General; Integrated buffer memory; Formats and modes supported; Audio output and headphone jack for audio CD playback; System requirements; Windows PC

Introduction Features The external CD-RW has the following features: General ● Transportable external drive with Universal Serial Bus (USB) interface ● Hot Plug-n-Play compatible ● Integrated buffer memory ● Power tray loading and ejection of disc (manual eject too) ● Housed in an airtight frame cas...

Page 4 - Precautions; Installation; Do not move drive during operation, it may cause an error.; Transportation; Close the disc drawer before moving the drive.; Location of controls; Front panel; The front panel controls are described below.; Rear panel; The rear panel controls and connectors are described below.

Precautions 7 Precautions ■ Installation ● Avoid placing the drive in a location subject to:– high humidity– high temperature– excessive dust– mechanical vibration– direct sunlight ■ Operation ● Do not move drive during operation, it may cause an error. ● Avoid sudden temperature changes, condensati...

Page 5 - Step 2: Attaching USB drive to PC; Unpack the included materials and locate the USB port on the drive.; USB ports and cables are identified by the USB symbol.; To attach the port connector of the USB cable:; Grasp the port connector and pull to remove.

Step 2: Attaching USB drive to PC Unpack the included materials and locate the USB port on the drive. Attach the USB and power cable to the drive, then plug in the power cableto an electrical outlet and switch on the external unit. Next, locate the USB connector on the PC. Hardware installation 9 Ha...

Page 6 - Insert the port connector of the USB cable into the PC’s USB port.

Note:This will only appear the first time a USB device is connected. Click the Next> button, then the following screen should appear: Hardware installation 11 Insert the port connector of the USB cable into the PC’s USB port. Note: If no USB connector(s) available (already in use), seeTroubleshoo...

Page 7 - Finish; to complete the installation.; Accept the default and click

The following message appears for the driver on floppy option (path may differ).Click Next> . The following message appears indicating that the installation almostcomplete.Click on Finish to complete the installation. Hardware installation 13 Accept the default and click Next> , the following ...

Page 8 - Then click; and check; System Properties; Click

Then click Finish and check System Properties * (Device Manager) screen to assure proper installation. It should appear as illustrated. *System Properties is found by moving the cursor to My Computer icon,then clicking the opposite mouse button and selecting Properties. The USB drive is now ready to...

Page 9 - Step 3: Attaching USB drive to Mac; Open cover to iMac ports.

 Thread USB cable through the opening in the cover.  Locate the port with a USB symbol.  Insert USB port connector into USB port of the iMac computer.  Insert the “Mac Software” CD in the built-in CD-ROM drive and followthe installation instructions.  The USB drive is now ready to use! Hardware...

Page 10 - Opening the tray manually in an emergency; Turn off and unplug the USB drive.; Operating the drive; Starting the drive; Software Installation

Opening the tray manually in an emergency The tray may be manually opened if it fails to come out by means of ejectbutton or software command.  Turn off and unplug the USB drive.  Insert a pointed object, like a paper clip, into the emergency eject hole and push (typical force 46 N [4.7kg]). After...

Page 11 - Specifications; Service contacts in Europe; Troubleshooting; A few words about the USB interface; WINDOWS: Use the Device

Specifications ■ General Data transfer rate Sustained 6X max (900 kB/s) Burst 1.2 MB/s ■ Environmental conditions Humidity 10% to 90% (Max. wet bulb 29°C) Atmosphere Non-condensing Temperature 5° C to 45° C (41° F to 113° F) Non-operating / Storage Temperature -30°C to 50°C (-22° F to 122° F) ■ Mass...