Sony CDP-XE370 - Manuals

Parts Identification 5 Rear Panel CDP-XE570 CDP-XE370/XE270 ANALOG OUT L/R jacks 2 (7) CONTROL A1II jacks 3 (8, 15) DIGITAL OUT OPTICAL jack 1 (8) Mains lead 4 (7)

Getting Started 7 Getting Started Inserting Batteries Intothe Remote Control (CDP-XE570/XE370 only) You can control the player using the suppliedremote. Insert two R6 (size AA) batteries by matchingthe + and – on the batteries to the diagraminside the battery compartment. Insert the negative (–) end...

8 Making digital hookups If you have a digital component such as adigital amplifier, D/A converter, DAT, or MD,connect the component via the DIGITAL OUT(OPTICAL) connector using the optical cable(not supplied). Take off the cap and plug in theoptical cable. Note that you cannot use the followingfunc...

Playing CDs 9 Playing the CD –– Normal Play/Shuffle Play/Repeat Play This unit lets you play the CD in different playmodes. 1 Press PLAY MODE repeatedly until themode you want appears. 2 Press H . Tip (CDP-XE570/XE370 only) You can select the playing mode by pressingCONTINUE, SHUFFLE, or PROGRAM on ...

10 Using the CD display You can check information about the disc usingthe display. In the stop mode Press TIME/TEXT (or TIME for the CDP-XE370/XE270 ). CDP-XE570 CDP-XE370/XE270 The display shows the total number of tracks,total playing time, and music calendar. While in Shuffle Play mode (“SHUFFLE”...

Playing CDs 11 During normal playback Press TIME/TEXT. Each time you press this button, the displaychanges as shown in the chart below. Track title t Playing time on the current disc t Remaining time on the current track t Remaining time on the disc If a title or name has more than 12 characters,the...

12 Programming the CDtracks You can arrange the order of the tracks on adisc and create your own programme. Theprogramme can contain up to 24 tracks. 1 Press PLAY MODE repeatedly until“PROGRAM” appears in the displaybefore you start playing. 2 Turn l AMS L until the track you want appears and push l...

Playing CDs 13 Fading In or Out(CDP-XE570/XE370 only) You can manually fade in or out to preventtracks from starting or ending abruptly. Note that you cannot use this effect when youuse the DIGITAL OUT (OPTICAL) connector. To Start play fading in End play fading out Fading time lasts for 5 seconds. ...

14 3 Press TIME EDIT to have the playercreate the programme. The display shows the tracks to be recorded.“TAPE B” flashes in the display. 4 When you record on both sides of thetape, press TIME EDIT again. The player inserts a pause, then creates theprogramme for side B. The display showsthe programm...

Additional Information 15 Additional Information Using the CONTROL A1 II control system (CDP-XE570 only) This player is compatible with the CONTROLA1II Control System. The CONTROL A1II control system wasdesigned to simplify the operation of audiosystems composed of separate Sonycomponents. CONTROL A...

16 In the CONTROL A1II control system, thecontrol signals flow both ways, so there is nodistinction of IN and OUT jacks. If acomponent has more than one CONTROL A1IIjack, you can use either one, or connectdifferent components to each jack. About the connecting cable When a CONTROL A1II compatiblecom...

Additional Information 17 Precautions On safety • Caution — The use of optical instruments with this product will increase eye hazard. • Should any solid object or liquid fall into the cabinet, unplug the player and have it checked byqualified personnel before operating it any further. • Discs with ...

18 Troubleshooting If you experience any of the followingdifficulties while using the player, use thistroubleshooting guide to help you remedy theproblem. Should any problem persist, consultyour nearest Sony dealer. There’s no sound. • Check that the player is connected securely. • Make sure you ope...