Page 2 - Soundbar Connectors for Wall Mount Brackets; S O N A N C E S O U N D B A R S S B 4 6 M A N D S B 4 6 L; Soundbar Placement and; Mounting Option 1 - Flat Soundbar Connector; Mounting Option 2 - Recessed Soundbar Connector
Soundbar Connectors for Wall Mount Brackets Choose and attach the correct Soundbar connector to the display attachment rails for your desired depth. The flat Soundbar connector will align with 2 5/8” (65mm) deep displays. The recessed Soundbar connector will align with displays from 1 7/32” - 2 3/32...
Page 3 - C or D
3 If the spacers are not used the front surface of the display will be in line with the front radius of the Soundbar grille. This is dependent on the display thickness and installation preference. Proceed to Step 2 Display Spacers Included with your Soundbar are two 8mm thick wood display spacers. T...
Page 4 - Assembly; Proceed to Step 3
4 Step 2 Carefully place the display face down on a soft flat surface. This will require two people. Place the Soundbar face down and position it as close to the display as possible. Assembly Position the Soundbar display attachment rails on the back of the display mounting points. Place the display...
Page 5 - Mounting Option 3 - Key Hole Wall Mount; The 400mm mounting points; Proceed to Step 6
5 Mounting Option 3 - Key Hole Wall Mount The SB46 M and SB46 L can be mounted directly to the wall surface. Choose the Soundbar location and locate the studs with a stud finder. Use a level and the supplied cardboard key hole wall mount template to mark the locations on the wall where the screws sh...
Page 7 - Stereo Wiring; Proceed to Step 5 for mounting options 1 & 2
7 Step 6 Calibration Soundbar installation is now complete and ready for audio system calibration. Using a subwoofer is recommended. The subwoofer crossover frequency should be set to 100Hz. We recommend the VP10SUB & Amplifier or our Cabinet Subwoofers. The Sonance VP46R SST/SUR, VP66R SST/SUR,...