Sonance ASAP2 SAT - Manuals

Polarity It is important to observe correct polarity when using stereo mode.One side of the speaker lead will have some sort of mark, eitherprinting, a raised ridge on the insulation or different color ofconductor. This permits you to know which wire you had connectedto the + and which to the - spea...

Note: the video jack is for triggering purposes only; video signalswitching is not possible. External Voltage Trigger (Dip switch #2 On -- UP Position) The B input relay may also be activated by a low voltage controlsource. This is by connecting a 5 to 24 Volts AC or DC power sourceto the screw term...

1. Unscrew and save the two screws holding the current module in place. 2. Pull the module out of the SAT module bay.3. Disconnect the ribbon cable.4. Select the desired position of any jumpers on the SAT module (i.e. high pass filter). 5. Connect the ribbon cable to the ribbon cable connector on th...