Page 2 - Table of Contents; Features.....................................................................
2 Table of Contents INTRODUCTION………………………………………………….……..……… 3 Special Features…………………………………………………………… 3 Specifications……………………………………………………………… 3 HEATER DIAGRAM………………………………………………….………… 4 ASSEMBLY………………………………………………………………..…..… 5 Remove Packaging………………………………………………………… 5 Installation……………………..…………………………...
Page 3 - FLAT PANEL MICATHERMIC HEATER; Introduction; Special Features; in
3 FLAT PANEL MICATHERMIC HEATER Introduction Micathermic heat utilizes technology from both convection and reflective heat. The heater releases 80% convection and 20% reflective heat, distributing heat consistently and more evenly throughout the room. The heater radiates heat to warm surrounding obj...
Page 4 - Heater Diagram
4 Heater Diagram 1. Power Switch 2. ECO Green Light Indicator 3. Temperature Control Knob 4. Temperature Control Red Light Indicator 5. Power Supply Cord 6. Foot with Caster 7. Metal Grille 8. Built-in Handle 9. Mounting Hole 10. Mounting Support 11. Screws 12. Mounting Anchor for Wall Mounting
Page 5 - Assembly; Note; If any part is damaged or
5 Assembly Remove Packaging PLEASE READ ALL INSTRUCTIONS BEFORE OPERATING HEATER! 1. Remove the heater from the box. 2. Remove the poly foam from both ends of the heater, and remove the poly bag. 3. Remove the 2 remaining bags from the box . One bag contains: 2 feet with casters. [Fig 1] The other b...
Page 6 - Installation; Required Tools for Floor Use:
6 Installation Required Tools for Floor Use: Phillips screwdriver (not supplied) Estimated Assembly Time for Floor Use: 1 minute Assembly Instructions for Floor Use: Insert the feet and bolts onto the unit as shown in the diagram . Required Tools for Wall Mounting: Phillips screwdriver (not supplied...
Page 7 - Important Safeguards; any
7 Important Safeguards PLEASE READ ALL INSTRUCTIONS BEFORE OPERATING HEATER! ¾ The heater is hot when in use. To avoid burns, do not let bare skin touch hot surface. Use handles when moving this heater. Keep combustible materials, such as drapery and other furnishings, at least 3 feet (0.9M) from th...
Page 8 - Operation
8 Operation PLEASE READ ALL INSTRUCTIONS BEFORE OPERATING HEATER! 1. Make sure the Temperature Control Knob is at the “DOT” position. [Fig 1] Make sure the power switch is at the off position. [Fig 2] 2. Plug the power cord into a suitable electrical outlet. [Rated not less than 115 volt]. 3. Turn t...
Page 11 - WARRANTY; THIS WARRANTY DOES NOT COVER:; SOLEUS INTERNATIONAL INC.
11 WARRANTY One Year Limited Warranty Soleus International Inc. warrants the accompanying Soleus Air HGW-308 to be free of defects in material and workmanship for the applications specified in its operation instruction for a period of ONE (1) year from the date of original retail purchase in the Uni...
Page 2 - PLEASE READ ALL INSTRUCTIONS BEFORE OPERATING HEATER!
INTRODUCTION Heater Diagram Remove Packaging PLEASE READ ALL INSTRUCTIONS BEFORE OPERATING HEATER! 1. Power Switch 2. ECO Green Light Indicator 3. Temperature Control Knob 4. Temperature Control Red Light Indicator 5. Power Supply Cord 6. Foot with Caster 7. Metal Grille 8. Built-in Handle 9. Mounti...
Page 3 - PLEASE READ ALL INSTRUCTIONS BEFORE OPERATING HEATER !; Required tools for use on floor:; drill
Installation Operation PLEASE READ ALL INSTRUCTIONS BEFORE OPERATING HEATER ! Required tools for use on floor: phillips screwdriver (not included) Required tools for wall mounting: phillips screwdriver (not included) drill (not included) hammer (not included) A. On the floor Insert the feet and bolt...
Page 4 - Important Safeguards; The heater must not be located immediately below an outlet.
Important Safeguards PLEASE READ ALL INSTRUCTIONS BEFORE OPERATING HEATER ! ¾ The heater is hot when in use. To avoid burns, do not let bare skin touch hot surface. Use handles when moving this heater. Keep combustible materials, such as drapery and other furnishings, at least 3 feet [0.9m] from the...
Page 5 - THIS WARRANTY DOES NOT COVER:; caused by a defect in material or workmanship.; SOLEUS INTERNATIONAL INC.; DISCLAIMS ANY LIABILITY FOR CONSEQUENTIAL
Cleaning ¾ Before cleaning, turn off the heater, unplug the power cord and allow the heater to cool. ¾ Do not immerse power cord and plug or heater in water or other liquid or pour water or other liquid over the heater. ¾ Use a vacuum cleaner to remove dust and lint from the metal grille of the heat...