SoleusAir 3077997- Manuals

SoleusAir 3077997– User Manual, Manual in PDF format online.

Manuals:

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7

Summary

Page 3 - PRODUCT INFORMATION & SPECIFICATIONS; DISCLAIMER; However, if you have to use an extension cord, the cord shall be

25. SAVE THESE INSTRUCTIONS. 24. The heater is not to be used in wet or moist locations. 23. DO NOT locate against walls or behind drapes or 22. CAUTION: Use supply wires suitable for 105 3 PRODUCT INFORMATION & SPECIFICATIONS Reflective heating technology replicates the sun’s healthy rays, dire...

Page 4 - PRODUCT DIAGRAM; Polarized Plug; SAFETY FEATURES; SAFETY SWITCH; Operating Knob

PRODUCT DIAGRAM 4 Polarized Plug Warning: This heater is equipped with a polarized plug (one blade is wider than the other). The plug is in-tended to fit into a power outlet only one way, with the wide blade in the wide slot. This is a safety feature; if you are unable to insert the plug fully into ...

Page 5 - NOTE

ASSEMBLY 5 Remove the heater body and base from box. Remove the packaging materials. 1. Lay the heater body on a level surface, and then unscrew the 2 butterfly screws from the bottom of the heater. 2. Pull the power cord through the hole at the center of the base, and align the base with the bottom...

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7

Summary

Page 3 - PRODUCT INFORMATION & SPECIFICATIONS; DISCLAIMER; However, if you have to use an extension cord, the cord shall be

25. SAVE THESE INSTRUCTIONS. 24. The heater is not to be used in wet or moist locations. 23. DO NOT locate against walls or behind drapes or 22. CAUTION: Use supply wires suitable for 105 3 PRODUCT INFORMATION & SPECIFICATIONS Reflective heating technology replicates the sun’s healthy rays, dire...

Page 4 - PRODUCT DIAGRAM; Polarized Plug; SAFETY FEATURES; SAFETY SWITCH; Operating Knob

PRODUCT DIAGRAM 4 Polarized Plug Warning: This heater is equipped with a polarized plug (one blade is wider than the other). The plug is in-tended to fit into a power outlet only one way, with the wide blade in the wide slot. This is a safety feature; if you are unable to insert the plug fully into ...

Page 5 - NOTE

ASSEMBLY 5 Remove the heater body and base from box. Remove the packaging materials. 1. Lay the heater body on a level surface, and then unscrew the 2 butterfly screws from the bottom of the heater. 2. Pull the power cord through the hole at the center of the base, and align the base with the bottom...

SoleusAir Manuals