Page 3 - SPECIFICATIONS; DISCLAIMER; PACKAGE CONTENTS; MODEL
SPECIFICATIONS • The cooling capacity is measured at an ambient temperature of DB 86 °F, WB 78 °F. • Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit is in cooling mode. • Power consumption is measured when the fan runs at the highest speed setting. • T...
Page 4 - PRODUCT DIAGRAM; (Actual product design may differ slightly from images below); FRONT
PRODUCT DIAGRAM (Actual product design may differ slightly from images below) 4 FRONT A. Control panel B. Air outlet C. Casters D. Power Cord & Plug E. Drain Plug F. HEPA Air Filter Storage BACK A. Hot air outlet grill B. Lower air inlet grill C. HEPA Air Filter Holder D. HEPA Air Filter ACCESSO...
Page 5 - INSTALLATION; SELECTING THE LOCATION; MOUNTING THE EXHAUST HOSE; general
INSTALLATION 5 SELECTING THE LOCATION Place the unit in a flat location where the air out- lets are not obstructed. Place the unit at least 20” (50cm) away from a wall or other obstacle. MOUNTING THE EXHAUST HOSE Slide the square end of the exhaust duct over the hot air outlet on the back of the uni...
Page 6 - LCDI POWER CORD AND PLUG; ON; RESET
LCDI POWER CORD AND PLUG This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord with no termination on the load side and a LCDI attachment...
Page 7 - WINDOW KIT INSTALLATION
WINDOW KIT INSTALLATION The window kit is designed to fit into most standard vertical and horizontal windows, as well as some sliding glass doors. However, it may be necessary to modify some aspects of the installation process for certain window types. • Open the window or sliding door and adjust th...
Page 10 - CONTROL PANEL BUTTONS (Refer to the images on page 9)
OPERATING INSTRUCTIONS CONTROL PANEL BUTTONS (Refer to the images on page 9) 1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER button once more to turn the unit off. 2) Mode Selection - Press the MODE Button repeatedly to cycle between the different mode...
Page 13 - AIR PURIFIER FUNCTION; ONLY; HEPA AIR FILTER
13 AIR PURIFIER FUNCTION The PA1-10R-32 is equipped with a HEPA air purification mode. This mode is only available when the HEPA air filter has been inserted into the Air Filter Holder. Please note, when the air filter is inserted into the air cleaner, the PA1-10R-32 will ONLY operate in air purifie...
Page 14 - OPERATING THE UNIT USING THE REMOTE CONTROL
OPERATING THE UNIT USING THE REMOTE CONTROL 14 REMOTE CONTROL TIMER ON TIMER OFF LCD DISPLAY POWER BUTTON MINUTE SELECTER SLEEP BUTTON HOUR SELECTER TEMP SETTING MODE BUTTON FAN SPEED SWING (LOUVER OSCILLATION)
Page 16 - Emergency Condensate Holding Tank; off and the “; Do not move the unit when the water container is full
Emergency Condensate Holding Tank When the room temperature is low and the indoor humidity is high, the air conditioner may not be able to evaporate some of the moisture fast enough. When this happens, the water will accumulate in an emergency condensate tank inside the unit. Once the emergency cond...
Page 17 - MAINTENANCE; and dry it thoroughly out of sunlight.
MAINTENANCE Note: Make sure power is off and the power cord is not plugged into an electrical outlet prior to performing any maintenance on the unit. Clean or replace particulate air filter (Black Mesh Filter) - If the air filter is blocked with a dust, the air-flow volume may reduce. It is recommen...
Page 18 - WARRANTY; THIS WARRANTY DOES NOT COVER:; Freight and Insurance cost for the warranty service.; For Technical Support and Warranty Service
WARRANTY One Year Limited Warranty Soleus International Inc. warrants the accompanying Soleus Air Portable Air Conditioner to be free of defects in mate-rial and workmanship for the applications specified in its operation instruction for a period of ONE (1) year from the date of original retail purc...