Snapper YZ18336BVE, YZ18386BVE - Manuals

Snapper YZ18336BVE, YZ18386BVE – Manual in PDF format online.

Manuals:

Manual

Manual Snapper YZ18336BVE, YZ18386BVE

Summary

Page 2 - IMPORTANT SAFETY INSTRUCTIONS; PROTECTION FOR CHILDREN

2 IMPORTANT SAFETY INSTRUCTIONS WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. Th...

Page 3 - PREPARATION

3 IMPORTANT SAFETY INSTRUCTIONS PREPARATION (Continued From Previous Page) 6. Check the area to be mowed and remove all objects such as toys, wire, rocks, limbs and other objects that could cause injury if thrown by blade or interfere with mowing. 7. Keep people and pets out of mowing area. Immediat...

Page 4 - TOWING

4 IMPORTANT SAFETY INSTRUCTIONS TOWING 1. Tow only with a machine that has a hitch designed for towing. DO NOT attach towed equipment except at the hitch point. 2. Follow the manufacturer’s recommendation for weight limits for towed equipment and towing on slopes. 3. DO NOT allow children or others ...

Page 5 - TABLE OF CONTENTS

5 TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS........................................................................ 2-4 TABLE OF CONTENTS ......................................................................................................5 SECTION 1 - FAMILIARIZATION............................

Page 6 - Section 1 - FAMILIARIZATION

6 Section 1 - FAMILIARIZATION FIGURE 1.1 1.1 INTRODUCTION This manual has been prepared for the operator’s of the SNAPPER SCRAMBLER. Its purpose, aside from recommending standard operating procedures and routine service requirements, is to promote SAFETY through the use of accepted operating practic...

Page 7 - Section 2 - OPERATING INSTRUCTIONS

7 Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST Make the following checks and perform the service required before each start-up. 2.1.1. Check tires and add or release air as needed to bring pressure to 12 P.S.I. in front and 12 P.S.I. in rear tires. 2.1.2. Check guards, deflectors and ...

Page 8 - WARNING

8 Section 2 - OPERATING INSTRUCTIONS IMPORTANT: This SCRAMBLER is equipped with hydrostatic drive. The forward, rearward and steering movement of the machine is controlled by a joystick lever. Joystick operations should be performed only from the operator’s position in the seat. A small movement of ...

Page 9 - BLADE; DO NOT park machine on slopes.

9 Section 2 - OPERATING INSTRUCTIONS WARNING DO NOT operate blades in reverse. STOP BLADES. LOOK and SEE behind and down for children, pets and hazards before and while backing. 2.2.3. MOWER BLADE 1. With engine running, move engine speed control to the Rabbit or “fast” detent. (NOTE: Moving control...

Page 10 - When positioning the cutting; SAFETY INTERLOCK SYSTEM CHECKS; ENGINE MUST NOT START IF:; Park Brake in engaged position.; ENGINE MUST BEGIN TO STOP IF:; Engine will continue to run if Operator

10 Section 2 - OPERATING INSTRUCTIONS 2.3.5. CUTTING HEIGHT ADJUSTMENT This machine has seven different cutting height positions. IMPORTANT: When positioning the cutting deck into a higher cutting position, pull up on the deck lift handle only, it is not necessary to pull up on the release lever at ...

Page 11 - Section 3 - MAINTENANCE; SINGLE BLADE DECK

11 Section 3 - MAINTENANCE 3.1 INTRODUCTION To retain the quality of the SCRAMBLER, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particular mower, always mention the model and serial number. 3.2...

Page 12 - Pull deck lift handle to highest cutting position.; Checking Mower Belt Tension; Refer to engine owner’s manual for service

12 Section 3 - MAINTENANCE WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid serious burns,...

Page 14 - Mower Deck Linkage - Lubrication; The pivot shaft grease fitting can be accessed; Parking Brake Pivot Bushings; Remove key from ignition switch. Engage

14 Section 3 - MAINTENANCE WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid serious burns,...

Page 15 - Filter

15 Section 3 - MAINTENANCE WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid serious burns,...

Page 16 - ADJUSTMENTS

16 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid s...

Page 17 - Remove footrest/floor pan assembly. Refer to

17 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid s...

Page 18 - BELT REPLACEMENTS; Follow Steps 1

18 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid s...

Page 20 - FRONT OR REAR VIEW OF DECK

20 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid s...

Page 21 - 8” DECK SHOWN

21 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid s...

Page 22 - MOWER BLADE REPLACEMENT

22 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid s...

Page 23 - BLADE REPLACEMENT CHART

23 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid s...

Page 24 - TESTING; Battery Condition Chart; State of Charge

24 Section 4 - ADJUSTMENTS & REPAIR 4.5.5. BATTERY TESTING There are two types of battery tests: Unloaded and Loaded. The unloaded test is the procedure that will be discussed. It’s the simplest and most commonly used. An unloaded test is made on a battery without discharging current. To perform...

Page 25 - TROUBLESHOOTING; PROBLEM

25 TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Starter Will Not Crank 1. Battery dead. 1. Service battery. Engine 2. Blown fuse. 2. Replace fuse. 3. Electrical connections loose or corroded. 3. Clean and check connections for good contact. 4. Defective ignition switch. 4. Contact author...

Page 27 - SERVICE SCHEDULE; MAINTENANCE/REPLACEMENT PARTS

27 SERVICE SCHEDULE ITEM SERVICE PERFORMED REF. EACH USE 5 HRS 25 HRS 50 HRS 100 HRS EACH SEASON Engine Oil Check Oil Level Page 7 X Initial Oil Change Page 11 X Periodic Oil Change Page 12 X* Oil Filter Initial Oil Change Engine Manual & Page 11 X Periodic Oil Change Engine Manual & Page 12...

Page 28 - YEAR LIMITED WARRANTY; any authorized

28 2 YEAR LIMITED WARRANTY For two (2) years from purchase date for the original purchaser's residential, non-commercial use, SNAPPER , through any authorized SNAPPER dealer will replace, free of charge (except for taxes where applicable), any part or parts found upon examination by the factory at M...

Page 29 - PRIMARY MAINTENANCE

Page 33 - SNAPPER PRODUCT REGISTRATION FORM; IMPORTANT: KEEP THIS INFORMATION FOR YOUR PERSONAL RECORDS

33 SNAPPER PRODUCT REGISTRATION FORM IMPORTANT: KEEP THIS INFORMATION FOR YOUR PERSONAL RECORDS (Complete the following information on your Snapper purchase) Model Number _____________________________________________________________ Serial Number _____________________________________________________...

Page 34 - NOTES

34 NOTES ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________...

Snapper Manuals

Snapper 7800756 User Manual
Snapper 7800264 (SPV22675HWFC) User Manual
Snapper 7800266 User Manual
Snapper 13037230 User Manual
Snapper 7800776 User Manual
Snapper 7800776 Manual
Snapper 7800417 User Manual
Snapper 7800422 (NSPV21675E) User Manual
Snapper LT2452 (2690980) User Manual
Snapper 7800265 User Manual
Snapper 7800708 User Manual
Snapper 7800755 User Manual
Snapper 130381460 User Manual
Snapper 280121 User Manual
Snapper 13088768 User Manual
Snapper 7800604 User Manual
Snapper 7800709 User Manual
Snapper 7800607 User Manual
Snapper 7800830 User Manual
Snapper 7800179 (SPV21675) User Manual