Snapper SLB55150BV - Manuals

3 unit assembly Note: Please refer to Parts List for correct part identification and placement. FRONT WHEEL ASSEMBLY • Attach front caster wheel assembly (#19-23) to unit by butting outward bends in mounting brackets of assembly against front lower corner of unit (next to blower discharge door), mak...

4 unit operation STARTING THE ENGINE IMPORTANT NOTE: The procedures outlined within this section are general guidelines, and are in no way meant to replace or supercede engine manufacturer’s operating instructions. In order to obtain optimum performance from your engine, refer to your engine manual....

4 unit operation (cont.) STARTING THE ENGINE (cont.) • Bracing unit with one hand, grasp recoil handle and pull briskly. You may have to pull several times before engine starts. (If engine fails to start within a reasonable amount of time, discontinue and check engine manual for further instructions...

4 unit operation (cont.) BLOWER OPERATION (cont.) • Do not start unit until you are ready to begin blowing, and promptly shut off unit as soon as operation is complete. • Keep hands, feet and clothing away from rotating parts. Never place your feet or hands in path of discharge. • Use proper discret...

5 maintenance (cont.) BEFORE MAKING ANY ADJUSTMENTS, STOP ENGINE AND DISCONNECT SPARK PLUG WIRE TO PREVENT INADVERTENT STARTING OF UNIT. • Always keep your machine clean - especially the engine. Check all adjustments periodically. Also, periodically check that all fasteners are secure. • Never make ...

SNAPPER MODEL SLB55150BV R0703.1 Ref No Part No Description Qty 1 3010003 Housing, blower & engine base 1 --- 3079090 Decal, Danger – Hands & Feet (applied to blower housing) 1 --- 3079091 Decal, Caution – Rotating Parts (applied to blower housing) 1 --- 3079088 Decal, Danger – Flying Materi...