Page 3 - Uncrating; Battery Installation; Connect Battery; WARNING
S150X 21HP, 23HP, 25HP & 27HP - 48” & 52” Mower Deck 10/2007 3 TP 300-7343-A-M1-SP Uncrating 1. Using a reciprocating utility saw or equivalent, cut crate away from bottom skid. Remove crate. Removeshrink-wrap plastic. 2. Cut nylon banding from front of the frame and rear rear bumper. 3. Ope...
Page 4 - Motion Control Handle Assembly; Seat Assembly
S150X 21HP, 23HP, 25HP & 27HP - 48” & 52” Mower Deck TP 300-7343-A-M1-SP 10/2007 4 TractorAssembly Motion Control Handle Assembly 1. Remove the handles and mounting hardware from the handle bar box. 2. Install the ground speed control handles (A, Figure 4) onto the control lever base using t...
Page 5 - Roll Bar Assembly; Install the Roll Bar
S150X 21HP, 23HP, 25HP & 27HP - 48” & 52” Mower Deck 10/2007 5 TP 300-7343-A-M1-SP Roll Bar Assembly Install the Roll Bar 1. Unpack the roll bar and hardware from the box. 2. Remove the clevis pin (C, Figure 6) from the lanyard (A). 3. Install the lanyard anchor (B) onto the lanyard as shown...
Page 7 - Check Tire Pressures
S150X 21HP, 23HP, 25HP & 27HP - 48” & 52” Mower Deck 10/2007 7 TP 300-7343-A-M1-SP CheckFluid Levels Check the Engine Oil Level 1. Use the dipstick (A, Figure 11) to check the engine oil level. If necessary add engine oil. Check theengine manufacturer’s owner’s manual for the oilrecommendati...
Page 8 - Check Torque - Mower Blades
S150X 21HP, 23HP, 25HP & 27HP - 48” & 52” Mower Deck TP 300-7343-A-M1-SP 10/2007 8 Check the MowerAssembly Check Torque - Mower Blades 1. Park the machine on a flat, level surface and engage the parking brake. 2. Lock the deck lift pedal in the 5” (12,7 cm) position. 3. Check that blades are...
Page 9 - Check Deck Rod Timing
S150X 21HP, 23HP, 25HP & 27HP - 48” & 52” Mower Deck 10/2007 9 TP 300-7343-A-M1-SP Check Deck Rod Timing 1. Park machine on a flat, level surface. Disengage the PTO, stop the engine and engage the parking brake.Rear tires must be inflated to 15 psi (1,03 bar); fronttires to 25 psi (1,72 bar)...
Page 11 - Check Deck Drive Belt
S150X 21HP, 23HP, 25HP & 27HP - 48” & 52” Mower Deck 10/2007 11 TP 300-7343-A-M1-SP Check Deck Drive Belt 1. Lower the mower deck to its lowest cutting position. 2. Remove the mower deck guards. 3. Make sure the V-side of the belt runs in the pulley grooves (Figures 20). 4. If the belt is no...
Page 12 - Lubrication
S150X 21HP, 23HP, 25HP & 27HP - 48” & 52” Mower Deck TP 300-7343-A-M1-SP 10/2007 12 Lubrication Lubricate the unit at the locations shown in Figure 22through 25 as well as the following lubrication points. Grease: • front caster wheel axles and yokes• deck lift pivot blocks• mower deck spind...
Page 14 - Functional Tests; Operational SAFETY Checks
S150X 21HP, 23HP, 25HP & 27HP - 48” & 52” Mower Deck TP 300-7343-A-M1-SP 10/2007 14 Perform theSafety Checks Functional Tests 1. Check the tractor for loose bolts, screws, nuts, etc. 2. Start the engine and check all the controls for proper operation: ground speed control levers, parkingbrak...
Page 15 - Seat Adjustment
S150X 21HP, 23HP, 25HP & 27HP - 48” & 52” Mower Deck 10/2007 15 TP 300-7343-A-M1-SP AdjustmentProcedures Seat Adjustment See Figure 27. The seat can be adjusted forward andbackward. Move the lever forward, position the seat asdesired, and release the lever to lock the seat intoposition. A Fi...
Page 18 - CAUTION
S150X 21HP, 23HP, 25HP & 27HP - 48” & 52” Mower Deck TP 300-7343-A-M1-SP 10/2007 18 18 Figure 32. Parking Brake AdjustmentA. Brake SpringB. Adjustment Nut Parking BrakeAdjustment 1. Disengage the PTO, engage the parking brake, stop the engine and remove the ignition key. 2. Locate the brake ...