Snapper R205012, NR205012 - Manuals

5 Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST Make the following checks and perform the service required before each start-up. 2.1.1. Check guards, deflectors, grass bag, adapter and covers to make sure all are in place and securely tightened. 2.1.2. Check blade control to insure it ...

6 Section 2 - OPERATING INSTRUCTIONS 2.3 STOPPING Stop engine and blade by releasing the blade control. WARNING Stop engine and mower blade by releasing the blade control before adjusting cutting height. 2.4 CUTTING HEIGHT ADJUSTMENT Positioning the axles in the lowest of the four adjustment positio...

7 Section 3 - MAINTENANCE 3.1 INTRODUCTION To retain the quality of the mower, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particular mower, always mention model and serial number. 3.2 SERVICE ...

9 TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Engine Will Not Start 1. Fuel tank empty. 1. Fill fuel tank with fresh fuel. Using Recoil Starter 2. Engine needs priming. 2. Push primer bulb three times. 3. Spark plug wire disconnected. 3. Place spark plug wire onto spark plug. Engine Sta...

10 SERVICE SCHEDULE ITEM SERVICE PERFORMED REF. EACH USE 5 HRS 25 HRS 50 HRS 100 HRS EACH SEASON Engine Oil Check Oil Level Page 8 X Initial Oil Change Page 8 X Periodic Oil Change Page 8 X* Air Pre-Cleaner Clean Sponge Element Engine Manual & Page 9. X** Air Cleaner Clean or Replace Engine Manu...