Snapper P/N 7600027 - Manuals

unit assembly 3 STEP 1: Remove pin, rod and spring securing dis- charge deflector to mower deck, and removedeflector. Set rod and pin aside for future assem-bly step. Store deflector for future use. IMPOR- TANT: Never operate mower without discharge deflector or grass catcher securely in place. STEP...

STEP 9: Install belt guard between pulley guard and belt guard support clip on front part of blowermount. Secure with two 5/16 nylon wing nuts.Tighten nuts securely. !! Warning: Weight kit must be installed prior toinstalling clamshell kit. Failure to do so mayresult in longitudal tipping of unit. !...

STEP 16: Slip one hose clamp onto each side of discharge hose, and install hose between blowerand clamshell. NOTE: Install hose so that clampwith nut is on the clamshell side, and the clampwith the black quick-release knob is on the blowerside. Tighten both clamps securely. unit assembly 3 9 CLAMPWI...

4 unit operation & maintenance 10 IF THE GRASS CATCHER BECOMES CLOGGED(Continued From Previous Page) 2. Empty catcher more often. 3. Clean screen on rear cover assembly. 4. Ground speed too fast – cut at slower speed. 5. Removing too much grass – raise cutting height, cutpartial width, and cut l...

warranty statement 5 11 2 YEAR LIMITED WARRANTY For two (2) years from purchase date for the original purchaser's residential, non-commercial use, SNAPPER, through anyauthorized SNAPPER dealer will replace, free of charge (except for taxes where applicable), any part or parts found uponexamination b...

Snapper Z-Vac Large Clamshell Catcher Group Item Part No. Qty Description 1 7100564 1 COVER, Rear, Large Clamshell Bagger -- 7300365 1 SCREEN, Large Clamshell (Not Shown) -- 73525 8 RIVET, 5/32 (Not Shown) 2 7400119 1 WELDMENT, Rear Cover Brace 3 73179 1 HINGE, Rear Cover 4 91265 5 SCREW, #10-24 x 1...

Snapper Z-Vac Clamshell Catcher Mount Group Item Part No. Qty Description 1 50551 2 STANDOFF, Bumper Mount (weldment) 2 1723436 1 WELDMENT, Bumper Mount Plate 3 91318 4 SCREW, 5/16-18 x 3/4" Hex Head Cap, GR5 4 91601 4 NUT, 5/16-18 Hex Flange Lock, GR5 5 1717085 1 ROD, Hitch 6 15067 1 HAIR PIN, ...

Snapper Z-Vac Weight Mount Group Item Part No. Qty Description 1 3027501 1 CHANNEL, Weight Mounting 2 3046992 2 BAR, Clamp 3 91131 4 BOLT, 3/8-16 x 4" Hex Tap, GR5 4 90546 4 NUT, 3/8-16 Hex Center Lock, GR5 or B 5 3027502 26 BAR, Weight 6 92072 3 SCREW, 1/2-13 x 7-1/2" Hex Head Cap 7 90619 3...

Snapper Z-Vac Decal Group Item Part No. Qty Description 1 3079231 1 DECAL, Z-Vac 2 3046850 1 DECAL, Danger, Fast-Vac 3 3046851 1 DECAL, Warning, Fast Vac 4 3046883 1 DECAL, Warning, Fast-Vac 5 73956 1 DECAL, Warning, Billboard (on clamshell unit) unit breakdown & parts list 6 23