Snapper 7600004 - Manuals

unit assembly 3 STEP 1: Remove pin, rod and spring securing dis- charge deflector to mower deck, and removedeflector. Set rod and pin aside for future assem-bly step. Store deflector for future use. IMPOR- TANT: Never operate mower without discharge deflector or grass catcher securely in place. STEP...

STEP 16: Slip one hose clamp onto each side of discharge hose, and install hose between blowerand clamshell. NOTE: Install hose so that clampwith nut is on the clamshell side, and the clampwith the black quick-release knob is on the blowerside. Tighten both clamps securely. unit assembly 3 9 CLAMPWI...

4 unit operation & maintenance 10 IF THE GRASS CATCHER BECOMES CLOGGED(Continued From Previous Page) 2. Empty catcher more often. 3. Clean screen on rear cover assembly. 4. Ground speed too fast – cut at slower speed. 5. Removing too much grass – raise cutting height, cutpartial width, and cut l...

warranty statement 5 11 2 YEAR LIMITED WARRANTY For two (2) years from purchase date for the original purchaser's residential, non-commercial use, SNAPPER, through anyauthorized SNAPPER dealer will replace, free of charge (except for taxes where applicable), any part or parts found uponexamination b...

McDonough, GA 30253 U.S.A. Manual No. 7011299 (I.R. 03/11/05) A AS SS SE EM MB BLLY Y IIN NS ST TR RU UC CT TIIO ON NS S O OP PE ER RA AT TO OR R''S S M MA AN NU UA ALL P PA AR RT TS S LLIIS ST T ZZ --V VA AC C Clamshell Grass Catcher Kit for NZMMid MountRiders