Snapper 1694921 - Manuals

Step 1; See Figure 1: Identify the steel parts by using Figure 1. 1 2 2 3 5 6 7 8 9 10 11 13 Figure 1 14 12 4 5 5

Step 2; See Figure 2 & 2A: 1 Install Front Panel Frame (1) A. Remove the bolt at reference A on both sides of the tractor. Place the Front Panel Frame over the dash from behind. Insert two 5/16” x 1 1/4” bolt inwards through the holes in the Front Panel Frame Legs. B. Place a 5/8” O.D. x 1/2” sp...

Step 6; See Figure 6: Install right and left Rear Posts (10 & 11) and right and left Rear Boxing Posts (12 & 13). NOTE: When properly installed Rear Post latch plates will face forward with the notch to the outside . A. Insert a 1/4” x 3/4” bolt outwards through the Rear Cross Bar, right Rea...

Step 10: See Figure 10: Install Rear Curtain (15). A. Lay the rod sewn into the vinyl over the rear of the Top Frame. Close the snap flaps at the corners. B. Close the snap flaps over the Rear Posts and Rear Cross Bar. C. Secure the ties to the Rear Cross Bar. D. Place a notched Plastic Protector ov...