Smeg KLF04CRAU - Manuals

Instructions 7 ENEN 1.5 Manufacturer liability The manufacturer shall not be liable for damage to persons or property caused by:• Use of the appliance other than as envisaged • Not having read the user manual• Tampering with any part of the appliance • Use of non-original spare parts• Failure to obs...

Description 8 2 Description 2.1 Product description Model KLF04 - Variable temperature kettle 1 Anti-drip spout 2 Scale filter 3 Lid with soft opening 4 Handle 5 Water level indicator 6 Control panel 7 Base with 360° connection and temperature indicators 8 Cable compartment (under base) 8 3 4 5 7 6

Description 9 ENEN 2.2 Description of parts Anti-drip spout (1) The large stainless-steel spout allows water to be poured easily and without spillage. Scale filter (2) The stainless-steel filter is located behind the spout. It retains any scale present in the water. Lid with soft opening (3) The lid...

Description 10 Control panel (6) START/STOP key Starts/stops the heating cycle. The LED lights up when the cycle is started. Temperature selector Allows you to select one of 7 temperature levels. The temperature indicator LEDs turn on when the boiling cycle is started. Keep Warm function key Allows ...

Use 11 ENEN 3 Use 3.1 Before first use 1. Remove all stickers and labels from the kettle and clean the outside with a damp cloth. 2. Remove the scale filter behind the spout and wash it under running water. 3. Replace the filter in the correct position. 4. Remove the kettle from its base, press the ...

Use 12 3.2 Operation 1. If necessary, shorten the length of the power cable by winding it under the base. 2. Hold the kettle by its handle when removing it from the base. 3. Press the button ( 1 ) to open the lid. 1

Use 13 ENEN 4. Fill the kettle with the required quantity of water, referring to the marks on the level indicator ( 2 ). 5. Close the lid again and place the kettle back on its base. 6. Insert the plug into the power socket. All LEDs come on and a beep sounds to indicate that the appliance has been ...

Use 14 10. Pick up the kettle by the handle and pour the hot water into the desired recipient (cups, teapot etc.). 11. If no command is given within 60 seconds, the kettle will enter Stand-by mode (all LEDs off). Pressing any key will reactivate the kettle, placing it in Temperature SELECTION mode s...

Use 15 ENEN 3.5 Suggestions for setting the water temperature Drink Recommended temperature Delicate teas 50° - 60°C Green tea 70° - 80°C White tea 70° - 80°C Oolong tea 90° - 95°C Black tea 90° - 100°C Herbal teas 90° - 100°C Instant coffee, Instant cappuccino, Instant drinking chocolate 90° - 100°...

Cleaning and maintenance 16 4 Cleaning and maintenance 4.1 Instructions 4.2 Cleaning the surfaces To keep the kettle’s outside surfaces in good condition, they should be cleaned regularly after use. Let them cool first. 4.3 Ordinary daily cleaning Always use only products which do not contain abrasi...

Cleaning and maintenance 17 ENEN 4.4 Cleaning the filter 1. Open the lid and extract the filter. 2. Wash the filter under running water with the aid of a soft brush. 3. Put the filter back in position behind the spout. Important When washing the filter, make sure your hands are clean and free of any...

Cleaning and maintenance 18 4.5 Descaling Regularly removing any deposits of scale inside the kettle will prolong your kettle’s life, ensuring maximum performance and energy savings. The kettle can be descaled using specific descaling products. Leave the descaling product to act, then rinse thorough...

Cleaning and maintenance 19 ENEN 4.6 What to do if... Problem Cause Solution Pouring water becomes more difficult Scale build-up on filter Check that the filter is clean and correctly positioned The kettle turns off before boiling The base of the kettle has excessive scale build-up Descale more freq...