Smeg 155620- Manuals

155620 • If you have a tumble dryer of the same dimensions, you can place it on top of the washing machine. To ensure correct operation of the appliance, water pressure inlet must be between 0,05 and 0,8 MPa. Minimum water pressure can be established by measuring the quantity of poured out water. 3 ...

155620 • Fix the outlet hose to run into the sink or the bathtub, or connect it directly to the wall drain outlet (diameter min. 4 cm). • Wall drain must be installed properly and must enable occasional cleaning. • Fasten the outlet hose support with a piece of rope led through the hose elbow, to pr...

155620 Functional knobsKnob B (MENU) - Use this knob to scroll around main menu. Knob C (SELECTION) - Use this knob to scroll around main menu. Knob F (START/PAUSE) - Use it to start or fi nish the program. A - program selectorB - MENU knobC - SELECTION knobD - short program knob E - easy ironing kn...

155620 1. Name of the program, 2 . Duration or time of day, 3. Symbols for activation of additional functions, 4. Water quantity in liters, 5. Spin RPM Program is selected by turning the program selector from the “0” position to the desired washing program. The display indicates particular washing p...

155620 Delicate This is a program for delicate fabrics (dresses, skirts, blouses) and curtains. Wool Especially gentle program for washing wool and garments made from mixture of other fabrics with wool, appropriately marked for machine washing. Manual wash Very gentle program concluded with short ge...

155620 are displayed in sequence. If you do not wish to activate or change certain displayed function, press knob B (MENU) to move to the next available function.Functions with the choice of multiple available settings, display the default one in bold (spin RPM, extra rinse, more water, sound signal...

155620 - Press the START/PAUSE button (F) and reactivate the child lock. In case you fail press any knob within 15 seconds, the protection is automatically reactivated. Permanent disengagement of the function: a.) During the operation: - Keep the MENU knob (B) pressed for 4 seconds.- Stop the progra...

155620 - Adding washing and softening agents (see tips for washing and energy saving)• pre-wash compartment • main wash compartment • softener compartment If you do not apply the program which includes the pre-wash feature, you may add washing detergent directly into the drum, using the measuring ve...

155620 After certain time you may open the door if the water level in the drum is low enough, otherwise you must fi st empty the water (use additional program Pumping water out or Spin . MA (models with the door opening by pressing the G knob feature the function which enables you to open the door o...

155620 • Before washing sort out the laundry according to the type, degree of dirtiness and color resistance. • Prior selecting the washing program consult the sewn tab with information on a particular piece of laundry (see Maintenance chart on the last page). • Wash separately the new colored texti...

155620 underwear, etc.) into the special bag. • High spin RPM leave less moisture in laundry which dries out much quicker in the tumble dryer, thereby saving energy. Do not put clods of detergent into the soap dispenser as the tube in the washing machine may clog. Disconnect the washing machine from...

155620 • Insert the fi lter back as shown on the picture (arrow and pointer), and tighten by turning it in clockwise direction. To ensure good sealing the gasket surface (A) must be dirt free. If the washing machine identi fi es failures in the operation, it reports it immediately. Sound alarm is he...

155620 * Testing program by EN 60456 with the selection of max. spin RPM. ** Depending on the model. 25 Basic programs Type of laundry Max. load (kg) Te mp. (°C) Spin (RPM) Water cons. L Energy cons. kWh RPM RPM 800 - 900 1000 - 1700 800 - 1700 Cotton 7 95 max. 1700 62 55 2,31/2,19** Cotton 7 60 56 ...

PS PG3,4 OEM SME 155620/en (02-08) Normal wash Delicate wash Max. washing temp. 95°C Max. washing temp. 60°C Max. washing temp. 40°C Max. washing temp. 30°C Manual washing Washing not allowed Whitening Whitening in cold water Whitening not allowed Ironing Hot iron max. 200°C Hot iron max. 150°C Hot ...

155620 155620 Functional knobs Knob B (MENU) - Use this knob to scroll around main menu. Knob C (SELECTION) - Use this knob to scroll around main menu. Knob F (START/PAUSE) - Use it to start or finish the program. A - program selector B - MENU knob C - SELECTION knob D - short program knob E - easy ...

155620 155620 selector (A) to the desired program. The display indicates the selected program, along with basic settings. With each basic program you may also select additional functions . Cotton: whites/colored Normally stained cotton and flax bed linen and underwear, table cloth, bathroom towels, ...

155620 155620 Mix Special program for washing normally stained colored laundry made from various resistant fabrics at 40°C. - Selection of additional function ( , , , , , , , , , , ) The display always indicates only the menus with functions which are available for a particular program. Certain func...

155620 155620 SELECTION knob (C) on programs for cotton, synthetics, delicate and mixed laundry. Soaking This program is intended for removal of stubborn stains. In default setting the soaking function is off. It is engaged by pressing the SELECTION knob (C). Soaking time may be set from 1 h to maxi...

155620 155620 Permanent disengagement of the function: a.) During the operation: - Keep the MENU knob (B) pressed for 4 seconds. - Stop the program by pressing the START/PAUSE knob (F). - Using the MENU knob (B) move to child lock option. - Press the SELECTION knob (C) to disengage the function. b.)...

155620 155620 Pumping the water out Use it when the washing program was interrupted or if pump stop function was engaged, and you only wish to pump the water out of the drum, without spinning. Spinning Aggressive spinning for non-delicate laundry at high spin RPM. Spin revolutions can be altered. - ...

155620 155620 - Now minutes start flashing; they are set the same way as hours. - Confirm setting by pushing the MENU knob (B). - Return the program selector back to “0” position. Set time is automatically saved. • Setting the Clean water sensor In order for the Clean water sensor to start working p...

155620 155620 • Before washing sort out the laundry according to the type, degree of dirtiness and color resistance. • Prior selecting the washing program consult the sewn tab with information on a particular piece of laundry (see Maintenance chart on the last page). • Wash separately the new colore...

155620 155620 Disconnect the washing machine from the mains before cleaning! • The casing should be cleaned with soft cloth and mild detergent. • The interior of the drum and the door gasket is cleaned by washing at 60°C without laundry and adding half quantity of detergent. • If necessary, clean th...

155620 155620 If the washing machine identifies failures in the operation, it reports it immediately. Sound alarm is heard and the display reads ERROR. Number identifies the type of failure. In some cases you may attempt removing certain failures yourself (see the chart below), and the machine will ...

155620 155620 * Testing program by EN 60456 with the selection of max. spin RPM. ** Depending on the model. 32 33 Basic programs Type of laundry Max. load (kg) Temp. (°C) Spin (RPM) Water cons. l Energy cons. kWh RPM RPM 800 - 900 1000 - 1300 1400 - 1800 800 - 900 1000 - 1300 1400 - 1800 Cotton 6 95...