Smeg 129530- Manuals

Page 3 - Appliance description; Technical data

129530 1. Front panel2. Drying program button3. Water container 4. Door5. Condenser 6. Evacuation slots7. Cooling air slot8. Legs 9. Front (depending on model) Name plate with technical information for the appliance is located under the door frame. Dimensions of the appliance (w x d x h): 600 mm x 6...

Page 4 - Prevent; To reduce the; Warnings

129530 In case of condenser dryer it is not recommended to reduce temperature or switch off the heater, as the drying time is thus extended because of poor condensation of evaporated water. • Use the dryer to dry only the laundry washed with water. Do not attempt to dry the laundry, washed or cleane...

Page 5 - quickly removed and spread out so that the heat is dissipated.; Be careful not to damage cabinet of the appliance with; Removing wrapping; Installation and connection

129530 The belt can be replaced by a servising engineer only, who incorporates an original spare part with the marking OPTIBELT EPH 1906, code 104265, OPTIBELT 8 EPH 1941, code 160165 (depending on model). The symbol on the product or on its packaging indicates that this product may not be treated a...

Page 6 - Do not place the appliance behind lockable door,; Vibrations, moving of the appliance and loud operation; Installation

129530 • Appliance can either stand on its own or can be placed on top of a washing machine of the same dimensions - minimum width 517 mm, depth 476 mm. The surface for placing the dryer must be clean and fl at. Use supplied vacuum feet to prevent sliding of the appliance. Washing machine hardtop mu...

Page 7 - The distance between the dryer and the moist air outlet; The wall socket should always be within reach. It has to; Power connection

129530 The distance between the dryer and the moist air outlet (vent shaft, window) should not exceed 2 meters, otherwise water can accumulate in the tube. B - Condenser dryer • Laundry moisture is eliminated through the water condenser and collected in the condenser tank. You can avoid possible int...

Page 8 - Operation; Program selection jog

129530 Function keysB key (MENU) - Scrolling within main menu. C key (SELECTION) - Selecting sub-menu categories. D key (START /PAUSE) - Starting, interrupting and restarting the program. A - program selection jogB - MENU keyC - SELECTION key D - START/PAUSE keyE - display 8 Operation Program select...

Page 10 - Delayed start; Reduced temperature

129530 Turn the appliance off by turning the program selector jog A to the position “0”. - Selecting basic drying programs • For the programs cotton , synthetics and delicate laundry select the fi nal moisture level (see program chart). To start drying cycle press START or select additional settings...

Page 11 - Switching the function off:

129530 Anti-crease program The anti-crease program is set at 1 hour by default. You may also select either to switch off the program (0 h) or prolong the program to last 2 hours (2 h).The anti crease program is stopped if you open the door of the appliance during the program, or if you switch the ap...

Page 12 - Drying procedure

129530 Sound signal (audible warning) In default setting the sound signal is on.You may select to switch the sound signal off, or increase volume. Legend: sound signal off; normal sound signal setting; increased volume setting. If you switch the sound signal off the display indicates relevant symbol...

Page 13 - - End of drying procedure

129530 EXAMPLE: Selected program: cotton, slightly moist, functions selected: delayed start, decreased temperature, child lock, no sound signal). - End of drying procedure At the end of the drying procedure the display indicates END and CLEAN FILTER, and the beep is heard.In case of condenser dryer ...

Page 15 - Special functions; Tips for drying and for the economic use of the dryer

129530 pressing the D button ( START /PAUSE). • Drum lamp The drum is illuminated when the appliance door is open. If the door is open for more than 5 minutes and no changes to the settings have been made, the lamp goes off. • Display illumination Display illuminates when the program selection jog i...

Page 16 - Cleaning the; Cleaning and maintenance

129530 • After every drying clean the fi lter, located in the inner part of the door. • Lift the fi lter lid (Fig.). • Pull your fi ngers over the fi lter to remove fi bers and threads lining. Replace the fi lter cover. • If necessary, also clean the fi lter housing and door sealing. Cleaning of the...

Page 17 - Replacing the bulb

129530 amount of water may drip from the condenser when pulled out, so use absorbing cloth for this operation.• Open the exterior lid of the condenser by grabbing the handle on the lower left part of the appliance housing and pull it downwards. • Remove interior hatch by rotating the lever verticall...

Page 18 - service technician without hesitation.; Troubles; Trouble

129530 In case of F0, F1, F2, F3, F4 failures, contact your service technician without hesitation. Interferences from the ambient (for example electrical wiring) could induce signalization of different faults. In such cases:- switch the appliance off, and wait for a few seconds;- plug in the applian...

Page 19 - Tables; Program chart

129530 19 Tables Program chart Program Type of laundry Example of laundry COTTON max. load: 6 kg / 7 kg Very dry Thick or multiple layer laundry. Terry cloth, bathrobe Dry Thick laundry not requiring ironing Terry cloth, tricot laundry Dry for storage Uniformly thick laundry, requiring little or no ...

Page 21 - Table of textile symbols

129530 Measured values may differ from the actual ones due to fl uctuations in the type or quantity of laundry, spinning, power oscillation as well as ambience temperature and humidity. For illustration the chart gives values for 6/7 kg of testing laundry (measured by the EN61121 standard) on differ...