Sirius Satellite Radio EQ-SIRRCV - Manuals

Page 2 - Limited Warranty

Limited Warranty Applied Media Technologies Corporation ("AMTC") warrants this product against defective material and workmanship for a period of one year from the date of purchase. Except as specified below, this warranty covers parts and labor. The following are not covered by this warrant...

Page 3 - Check Package Contents:; Receiver; Placement and Mounting of the Antenna

Check Package Contents: Receiver (Model EQ-SIRRCV) - Box includes: Receiver Mounting Bracket (2 pieces) 120VAC to 12VDC 1.2A wall adapter 6-ft.stereo audio cable with 3.5mm stereo plug and dual RCA plugs 25cm dual RCA female to single RCA male (stereo to mono) adapter cable RCA female to 1/4" ma...

Page 4 - Positioning the Receiver and Connecting to Your Amplifier; The provided audio cable is; Connecting Power; jack labeled “DC12V” on the upper left

4. Plug the NON-THREADED connector on the antenna cable into the receptacle labeled ANTENNA on the upper right end of the receiver. If you must increase the distance between the antenna and the receiver, we stock 50-foot amplified extension cables (AMTC P/N EQ-SIR50X) for $39.95 (+ $5.00 S/H). Up to...

Page 5 - Receiver Controls and Features

5 1. Button: Turns receiver on and off.2. Channel Switch (CHAN) & Select Button: Navigates through channels & display screens and makes selections of items highlighted on the display. Pressing up increases or moves up in the menus. Pressing down decreases or moves down in the menus. Pressing...

Page 6 - DO NOT CALL THIS NUMBER -; Basic Operation; Selecting Channels

Activating your SIRIUS Satellite Music for Your Business Subscription Turn the receiver on by pressing the button. If the receiver is installed incorrectly, it may read “ANTENNA ERROR”. If this happens, unplug power from the receiver and double check the antenna cable connections. If the error messa...

Page 8 - Preset Tune List Mode

Searching for a Channel Preset (P.TUNE Mode) It is possible to quickly search through all of your presets using the Channel Switch.1. Press and hold the BAND button to enter the Preset Tune Mode (P.TUNE).2. “Preset Tuning Mode” will be displayed and the top corners of the display will invert to indi...

Page 10 - Menu Display Options

Activating the Song (S-Seek) Alert 1. Press and hold the MEMO button for 3 seconds to enter the S-Seek Mode.2. Press and release SELECT. A pop-up screen displaying two selectable options - “Delete” and “S-Seek” will appear (below left).3. Use the Channel Switch to highlight the “S-Seek” option.4. Pr...

Page 13 - Factory Default

b. Auto Shutdown: You can program the unit to automatically shut off after a 1-hour period without any user intervention. After 59 minutes of inactivity, a beep tone sounds and a display prompt appears on the screen, “Cancel Auto Shutdown”. To activate the Auto Shutdown feature, use the Channel Swit...

Page 14 - Troubleshooting; If there is no power to the unit:

Troubleshooting If there is no power to the unit: Make sure wall outlet is receiving power (plug in another device). Check power cable connection. If you get the “ANTENNA NOT DETECTED” message: Check connections to antenna. If you've connected your receiver to your amplifier but there is no sound: M...