Singer 2273 - Manuals

1. Thread tension dial2. Thread take-up lever3. Thread cutter4. Presser foot5. Needle plate6. Removable extension table/ accessory storage7. Reverse sewing lever8. Bobbin stopper9. Stitch dial 10. length 11. Pattern selector dial12.13. Automatic threader width Stitch dial One step buttonhole lever P...

2 3 Connecting Machine to Power Source 4 Polarized attachment plug Conductor intended to be grounded Connect the machine to a power source as illustrated. (1) This appliance is equipped with a polarized plug which must be used with the appropriate polarized outlet. (2) Unplug power cord when machine...

Two Step Presser Foot Lifter 5 A When sewing several layers or thick fabrics, the presser foot can be raised for easy positioning of the work. (A) to a higher position

6 Accessories Standard accessories (1) Optional accessories (2) a. All purpose foot b. Zipper foot c. Buttonhole foot d. Button sewing foot e. Seam ripper/ brush f. Edge/ quilting guide g. Pack of needles h. Spool holder i. Bobbin (3x) j. k. Oil bottle l. Darning plate m. n. Satin stitch foot o. Ove...

7 Winding the Bobbin - corresponding . (1/2) - Snap thread into thread guide. (3) - Wind thread counterclockwise around bobbin winder tension discs. (4) - Thread bobbin as illustrated and place on spindle. (5) - Push bobbin spindle to right. (6) - Hold thread end. (7) - Step on foot control pedal. (...

8 1 2 6 3 4 5 a Inserting the Bobbin When inserting or removing the bobbin, the needle must be fully raised. Attention: - Remove the extension table, then open the hinged cover. (1) - Pull the bobbin case tab (a) and remove the bobbin case. (2) - Hold the bobbin case with one hand. Insert the bobbin...

9 B A C D 1 2 Thread Tension Upper thread tension Lower thread tension Please note: Basic thread tension setting: "4" To increase the tension, turn the dial to the next number up. To reduce the tension, turn the dial to the next number down. A. Normal thread tension for straight stitch sewin...

10 2 1 6 8 7 5 3 4 Threading the Upper Thread This is a simple operation but it is important to carry out correctly as by not doing so . - Start by raising the needle to its highest point (1), and continue turning the handwheel counterclockwise until the needle just slightly begins to descend. Raise...

11 Automatic needle threader - Raise the needle to its highest position. - Press lever (A) down as far as it will go. - The threader automatically swings to the threading position (B). - Pass thread around thread guide (C). - Pass the thread in front of the needle around the hook (D) from bottom to ...

12 1 2 3 Raising the Bobbin Thread Hold the upper thread with the left hand. Turn the handwheel (1) towards you (counterclockwise) lowering, then raising needle. If it is difficult to raise the bobbin thread, check to make sure the thread is not trapped by the hinged cover or the Removable Extension...

How to Choose Your Pattern 13 c d a b The diagram on this page display the stitch patterns available on the machine. Stitches in the top of the diagram are indicated on the Pattern Selector Dial in black. To select the patterns indicated with the black color, turn the Pattern Selector Dial. (d) Use ...

14 Stitch Width Dial & Stitch Length Dial 1 2 Function of stitch width dial Function of stitch length dial while zig-zag stitching Function of stitch length dial for when straight stitching The maximum zigzag stitch width for zigzag stitching is 5mm; however, the width can be reduced on any patt...

15 To begin sewing, set the machine for straight stitch. (1) Place the fabric under the presser foot with the fabric edge lined up with the desired seam guide line on the needle plate. (2) Lower the presser foot lifter, and then step on the foot controller to start sewing. (3) Sewing Straight Stitch...

17 Choosing Stretch Stitch Patterns 1 2 The Stretch Stitch Patterns are indicated with a blue color on the Stitch Length Dial to the indicator marked "S1". Though there are several stretch patterns, here are two examples: The machine sews two stitches forward and one stitch backwards. Adjust...

18 Blind Hem 2 1 For hems on curtains, trousers, skirts, etc. Blind hem for stretch fabrics. Blind hem for firm fabrics. Set the Stitch Width Dial at a setting appropriate for the weight/type of fabric being sewn, within the range shown in the diagram on the right of the page. Generally, a narrower ...

19 Sew 1-step buttonholes 2 1 4 3 A D a b E B C Buttonhole sewing is a simple process that provides reliable results. However, it is strongly suggested to always make a practice buttonhole on a sample of your fabric and stabilizer. Making a Buttonhole Making a Buttonhole on Stretch Fabrics (E) 1. Us...

20 Sewing on Buttons 4 3 1 2 Install the darning plate. (1) Change the all purpose foot to the button sewing foot. (2) Set the stitch length to "0". To sew a few securing stitches, set the machine for straight stitch, with the stitch width set at "0".Raise the needle out of the fabri...

PUSH 1 2 Installing the Removable Extension Table 21 Hold the removable extension table horizontally, and push it in the direction of the arrow. (1) To remove the extension table, pull it toward the left. The inside of the removable extension table can be utilized as an accessory box. To open, flip ...

1 2 3 4 a c d e f b b a e g Attaching the Presser Foot Shank 22 Raise the presser bar dge/ quilting dge/ quilting (a) with the presser foot lifter. Attach the presser foot shank (b) as illustrated. (1) Lower the presser foot shank (b) using the presser foot lifter, until the cut-out (c) is directly ...

23 N Chart eedle/ Fabric/ Thread Heavy woolen, overcoat fabrics, upholstery fabrics, some leathers and vinyls. EXPLANATION Standard sharp needles. Sizes range thin to large. 9 (70) to 18 (110). Semi-ball point needle, scarfed. 9 (70) to 18 (110). Leather needles. 12 (80) to 18 (110). SINGER 2020 SIN...

Darning Plate 24 For certain types of work, (e.g. darning or free-hand embroidery), the darning plate must be used. Install the darning plate as illustrated. For normal sewing, remove the darning plate. For free-motion sewing it is recommended to use a darning/embroidery foot, available as an option...

25 A C B A B C D 1 2 Inserting & Changing Needles Change the needle regularly, especially if it is showing signs of wear and causing problems. For best sewing results always use SINGER Brand Needles. Insert the needle A. Loosen the needle clamp screw and tighten again after inserting the new nee...

C Changing the Bulb 1 2 26 PUSH A B Disconnect the machine from the power supply by removing the plug from the main socket!Replace bulb with same type rated 10 watts (110-120V area) or 15 watts (220-240V area). - Loosen screw (A) as illustrated. (1)- Remove the face plate (B).- Unscrew the bulb and ...

27 Troubleshooting Guide Problem Cause Correction Upper thread breaks Lower thread breaks Skipped stitches Needle breaks Loose stitches Seams gather or pucker Uneven stitches, uneven feed The machine is noisy The machine jams 1. The machine is not threaded correctly. 2. The thread tension is too tig...