Shure WH30XLR - Manuals - manualsarea.com

Page 2 - English; INTRODUCTION; The wireframe and gooseneck adjust to any head size and shape. An; FEATURES; without a mini TA4F connector, contact Shure Customer Service).

1 English INTRODUCTION The Shure Model WH30 is a light yet rugged headset microphone. Designed for vocalists and instrument-playing vocalists, the WH30 utilizes a high quality electret-condenser cartridge suitable for all applications where mobility, comfort, low microphone-visibility, and high soun...

Page 3 - MICROPHONE PARTS; Microphone Cartridge; COLLAPSIBLE MICROPHONE BOOM; unfold the boom by rotating it away from the; WEARING THE HEADSET

English 2 MICROPHONE PARTS The WH30 consists of the following parts (see Figure 1). 1. Microphone Cartridge and Windscreen 2. Microphone Boom and Cartridge Housing 3. Isolation Shock Mount4. Boom Hinge (rotates as shown) 5. Cable6. Elastic Headband7. Wireframe8. RPM420 Preamplifier (WH30XLR only) 1 ...

Page 4 - WEARING THE; ADJUSTING THE HEADSET; ADJUSTING THE WIREFRAME

3 English FIGURE 2. WEARING THE HEADSET FIGURE 3. POSITIONING THE MICROPHONE ADJUSTING THE HEADSET • If the headset feels loose or uncomfortable, carefully bend the sides of the wireframe to make it tighter or looser (see Figure 4A). The angle of the wire- frame earpieces may also need adjustment (s...

Page 5 - ELASTIC HEADBAND ADJUSTMENT; USING THE CABLE RETAINER AND CLOTHING CLIP; right corner; CONNECTING THE WH30 TO A SOUND SYSTEM; transmitter such as the Shure T1 bodypack transmitter.; WASHING THE ELASTIC HEADBAND

English 4 FIGURE 5. ELASTIC HEADBAND ADJUSTMENT USING THE CABLE RETAINER AND CLOTHING CLIP Use the cable retainer on the wire frame of the headset to position the microphone cable as desired. The supplied spring-loaded clothing clip secures the microphone cable to the user’s clothing to help avoid e...

Page 6 - cable with the plastic retainer.; WASHING THE FOAM WINDSCREEN; Important; CERTIFICATION; Elastic Headband

5 English 3. Wash the headband in mild, soapy water and rinse it in clean water.4. Allow the headband to air-dry thoroughly.5. Slide the headband around the wireframe to its original position. Reattach the cable with the plastic retainer. WASHING THE FOAM WINDSCREEN The foam windscreen protects the ...

Page 7 - SPECIFICATIONS

English 6 SPECIFICATIONS WH30TQG WH30XLR Type Condenser, electret bias Condenser, electret bias with integrated preamplifier Frequency Response 40 to 20,000 Hz (See Figure 6) Polar Pattern Unidirectional (cardioid) (see Figure 7) Output Impedance (at 1kHz) 2400 Ω Rated 150 Ω (actual) (Tolerates load...

Page 8 - FIGURE 6; WH30: TYPICAL POLAR PATTERNS

7 English FREQUENCY IN Hz RELA TIVE RESPONSE IN dB 1 cm. (0.4 in.) 61 cm. (24 in.) FIGURE 6 . WH30: TYPICAL FREQUENCY RESPONSE FIGURE 7. WH30: TYPICAL POLAR PATTERNS

Page 9 - WIRING DIAGRAMS

English 8 WIRING DIAGRAMS MODEL WH30XLR MODEL WH30TQG 1 2 3 231 1 2 3 4 CARTRIDGE CARTRIDGE RED (to drain) (DC bias) BLACK (to source) (audio) SHIELD SHIELD BLACK (to source) (audio) RED (to drain) (DC bias) PREAMP XLR CONNECTOR TA4F CONNECTOR RC FILTER RC FILTER FET FET G G D D S S MIC ELEMENT MIC ...