Shure QLX-D2 - Manuals - manualsarea.com

Page 9 - Features; System Overview

11 Features Features • Transparent 24-bit digital audio• Extended 20 Hz to 20 kHz frequency range (microphone dependent)• 120 dB dynamic range• Digital predictive switching diversity• 64 MHz tuning bandwidth (region dependent)• More than 60 available channels per frequency band (region dependent)• U...

Page 10 - Quick Start; Step 1: Power and Antenna Connection; Step 3: Install Batteries into Transmitter; AA Batteries; AA Adapter; Press the side tabs on the bodypack or unscrew the; Installing Batteries; Place batteries (note polarity markings) and AA Adaptor as shown; Step 4: IR Sync to Create an Audio Channel; If the IR sync fails, repeat the IR sync procedure, carefully; Step 5: Sound Check and Gain Adjustment

12 Quick Start Step 1: Power and Antenna Connection ① Connect an antenna to each of the antenna connectors.② Connect the power supply to the receiver and plug into an AC power source. ③ Connect the receiver audio output to a mixer or amplifier.④ Press and hold the power button to turn on the receive...

Page 11 - Receiver Front and Back Panels; flashing = rate corresponds to traffic volume

13 Receiver Front and Back Panels 1 2 3 4 5 6 7 8 9 10 ① Display Shows menu options, receiver and transmitter settings. ② Arrow Buttons Adjust gain setting or change menu parameters. ③ Enter Button Press to save menu or parameter changes. ④ Sync Button Press to activate IR sync. ⑤ Power Switch Power...

Page 12 - Transmitters; ▼▲ = Use to select menu screens, edit menu; Battery Installation; Setting the AA Battery Type; Use the ▼▲ buttons to select the installed battery type:; = Nickel Metal Hydride; AA Battery Installation; Correct

14 Transmitters ① Power LED - Green = unit is powered on - Red = low battery ② On/Off Switch Powers the transmitter on or off. ③ Display: View menu screens and settings. Press any control button to activate the backlight. ④ IR window Align with the receiver IR window during an IR sync for automated ...

Page 13 - Transmitter Display; To increase, decrease or change a parameter, use the ▼▲ buttons; Transmitter Menu Options and Navigation; MH z; Tips for Editing Menu Parameters

15 Transmitter Display ① Battery Indicator Bars displayed indicate remaining battery life. ② Home Screen Display: Group and Channel/Frequency/SB900 Battery Runtime Use the arrow keys to select one of the following home screen displays: Group and Channel SB900 battery runtime Frequency group channel ...

Page 14 - Receiver Display; = Illuminates when receiver audio limiter is; Navigating the Receiver Menus; Main Menu; Advanced Menu

16 Receiver Display group channel r f audio gain scan network menu power gain dB T V OL TxOL MH z hr mn 1 2 3 4 5 6 7 8 9 10 11 12 13 1415 ① Group Displays group setting. ② Channel Displays channel setting. ③ Active Antenna Indicator Illuminates to indicate which antenna is active. ④ RF Signal Meter...

Page 15 - Charging Status LED

17 AA Batteries and Transmitter Runtime QLX-D transmitters are compatible with the following AA battery types: • Alkaline• Nickel Metal Hydride (NiMH)• Lithium Primary A 5-segment battery indicator representing the charge level of the transmitter battery is displayed on the screens of the transmitte...

Page 16 - Creating Audio Channels; Manual Group and Channel Assignment:; Scan and IR Sync; I I I I I; Manual Group and Channel Assignment; Manual Frequency Selection; Setting the Receiver Frequency; Setting the Transmitter Frequency

18 Creating Audio Channels A wireless audio channel is formed when a receiver and transmitter are tuned to the same frequency. To ease setup, frequencies available to the QLX-D system are organized into groups and channels. Each group contains a number of channels, and each channel is assigned to a ...

Page 17 - Receiver Gain Adjustment; Control Lock Options for the Receiver and Transmitter; Locking and Unlocking the Receiver Controls; To lock a receiver control:; Locking and Unlocking Transmitter Controls; To set a transmitter lock:; OFF; Error Codes and Solutions; Error Code

19 Receiver Gain Adjustment The gain control sets the overall signal level for the system. The default gain level is 12 dB and the available gain range is -18 to 42 dB, in 1 dB increments. Set the gain to a level where the audio LED appears green or yellow, with only the highest audio peaks causing ...

Page 18 - Troubleshooting; Issue; or it could be from an interfering source, such

20 Troubleshooting Issue See Solution... No Sound Power, Cables, or Radio Frequency Faint sound or distortion Gain, Cables, Reducing Interference or Radio Frequency Lack of range, unwanted noise bursts, or dropouts RF Cannot turn transmitter off or change frequency settings, or can't program receive...

Page 19 - QLXD Specifications

21 RF Carrier Frequency Range 470–937.5 MHz, varies by region (See Frequency Range and Output Power table) Working Range 100 m (328 ft) Note: Actual range depends on RF signal absorption, reflection and interference. RF Tuning Step Size 25 kHz, varies by region Image Rejection >70 dB, typical RF ...

Page 20 - Данная радиоаппаратура предназначается для

22 Certifications This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking. Certified under FCC Part 74. Certified by IC in Canada under RSS-123 and RSS-102. Approved under the Declaration of Conformity (DoC) provision of FCC Part 15. Certified...