Shure 8000 - Manuals

Shure 8000 – Manual in PDF format online.

Manuals:

Manual Shure 8000

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13

Summary

Page 2 - will start operation without; PRESSURE SWITCH OPERATION

automatically reset, and the pump will start operation without warning. CAUTION: To prevent electrical shock, disconnect power before initiating any work. In the case of pump failure, the motorhousing and/or the pumped fluid may carry high voltage tocomponents normally considered safe. PRESSURE SWIT...

Page 4 - MOUNTING; DO NOT; PLUMBING

MOUNTING • The 8000 series pumps are self priming. Horizontal and vertical prime vary depending on the fluid viscosity and pumpconfiguration. Refer to the pumps Product Data Sheet. • The pump should be located in an area that is dry and provides adequate ventilation. If mounted within an enclosure, ...

Page 5 - ELECTRICAL

vapor lock and a loss in performance. Inlet pressure mustnot exceed 30 psi [2.1 bar] maximum. • If a check valve is installed in the plumbing it must have a cracking pressure of no more than 2 psi [.14 bar]. NOTE: SHURflo does not recommend the use of metal fittings or rigid pipe to plumb the inlet/...

Shure Manuals