Sharp XR-32X-L - Manuals

1 Intr oduction Before using the projector, please read this operation manual carefully. There are two important reasons for prompt warranty registration of your new SHARPProjector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the ...

2 INFORMATION This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses, and...

3 Intr oduction How to Read this Operation Manual ■ The specifications are slightly different, depending on the model. However, you can connect andoperate all models in the same manner. ••••• In this operation manual, the illustration and the screen display are simplified for explanation, and may di...

4 Contents Preparing Introduction How to Read this Operation Manual .... 3 Contents ............................................... 4 IMPORTANT SAFEGUARDS ............... 6How to Access the PDF Operation Manuals .............................................. 9 Accessories ..............................

5 Intr oduction Reference Appendix Maintenance ....................................... 49Maintenance Indicators ...................... 50Regarding the Lamp ........................... 52 Lamp ..................................................... 52Caution Concerning the Lamp ............ 52Replacing...

6 1. Read Instructions All the safety and operating instructions shouldbe read before the product is operated. 2. Retain Instructions The safety and operating instructions should beretained for future reference. 3. Heed Warnings All warnings on the product and in the operatinginstructions should be ...

7 Intr oduction 15. Overloading Do not overload wall outlets, extension cords, orintegral convenience receptacles as this canresult in a risk of fire or electric shock. 16. Object and Liquid Entry Never push objects of any kind into this productthrough openings as they may touch dangerousvoltage poi...

9 Intr oduction Caution regarding usage of the projector ■ If you are not to use the projector for a longtime or before moving the projector, makecertain you unplug the power cord from thewall outlet, and disconnect any other cablesconnected to it. ■ If the power cord is unplugged while the cool-ing...

10 Accessories for XR-32X <RRMCGA662WJSA> Two R-6 batteries (“AA” size, UM/SUM-3, HP-7 or similar) Power cord* RGB cable (10 ' (3.0 m)) <QCNWGA086WJPZ> Optional accessories AN-F212LPAN-60KTAN-XRCM30 (for U.S.A. only)AN-TK201 <for AN-60KT>AN-TK202 <for AN-60KT>AN-EP101B <fo...

11 Intr oduction Numbers in Z refer to the main pages in this operation manual where the topic is explained. Projector Part Names and Functions 28 38 50 29 29 26 27 15 49 49 26 45 32 25 25, 50 38, 48 25, 50 38 Top View STANDBY/ONbutton For turning thepower on andputting theprojector intostandby mode...

12 Numbers in Z refer to the main pages in this operation manual where the topic is explained. Rear View Using the Kensington Lock • This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system fo...

14 • Danger of explosion if battery is incorrectly replaced.Replace only with alkaline or manganese batteries. • Insert the batteries making sure the polarities correctly match the m and n marks inside the battery compartment. • Batteries of different types have different properties, therefore do no...

15 Intr oduction Usable Range The remote control can be used to control theprojector within the ranges shown in the illustra-tion. N o t e • The signal from the remote control can be re- flected off a screen for easy operation. How-ever, the effective distance of the signal maydiffer depending on th...

16 Quick Start This section shows the basic operation (projector connecting with the computer). For details, seethe page described below for each step. Setup and Projection In this section, connection of the projector and the computer is explained using one example. When connecting equipment other t...

17 Quic k Star t 4. Adjust the projected image with the Setup Guide _ PP. 26, 27 1 After the projector turns on, the Setup Guide appears.(When “Setup Guide” is set to “On”. See page 44 .) 2 Follow the steps in the Setup Guide and adjust the focus, height (angle) and picture size. 3 After adjusting t...

18 Ceiling-mount Setup ■ It is recommended that you use the optionalSharp ceiling-mount adaptor and unit for thisinstallation. Before mounting the projector,contact your nearest Sharp Authorized Pro-jector Dealer or Service Center to obtain therecommended ceiling-mount adaptor and unit(sold separate...

19 Setup 300" 200" 100" 80" 40" 36'10 " (11.2 m) 24'7 "–28'4 " (7.5 m – 8.6 m) 12'3 "–14'2 " (3.7 m – 4.3 m) 9'10 "–11'4 " (3.0 m – 3.5 m) 4'11 "–5'8 " (1.5 m – 1.7 m) 240" × 180" 160" × 120" 80" × 60" 64" × 48" ...

20 Setting up the Projector (Continued) 300 (762 cm) 250 (635 cm) 200 (508 cm) 150 (381 cm) 120 (305 cm) 100 (254 cm) 80 (203 cm) 70 (178 cm) 60 (152 cm) 40 (102 cm) 610 cm (240 ) 508 cm (200 ) 406 cm (160 ) 305 cm (120 ) 244 cm (96 ) 203 cm (80 ) 163 cm (64 ) 142 cm (56 ) 122 cm (48 ) 81 cm (32 ) 1...

21 Connections Before connecting, ensure that the power cord of the projector is unplugged from the ACoutlet and turn off the equipment to be connected. After making all connections, turn on theprojector and then the other pieces of equipment. When connecting a computer, ensure thatit is the last eq...

22 Connecting the Projector to Other Equipment (Continued) S-VIDEO VIDEO COMPUTER/COMPONENT Equipment Video equipment Camera/Video game Cable S-video cable (commercially available) Video cable (commercially available) Cables for a camera or a video game Cables for a camera or a video game Cables for...

24 Connecting the Power Cord Plug the supplied power cord into theAC socket on the rear of the projector.Then plug into AC outlet. AC socket To AC outlet Power cord(supplied) Controlling the Projector by a Computer When the RS-232C terminal on the projector is connected to a computer with a DIN-D-su...

25 Basic Operation Turning the Projector On/Off On-screen display (confirmation message) • When “Auto Restart” is set to “On”: If the power cord is unplugged from the outletor the breaker switch is turned off when theprojector is on, then the projector automati-cally turns on when the power cord is ...

26 About the Setup Guide After turning on the projector, the SetupGuide screen appears to assist you withprojector setup. Guidance items 1 FOCUS2 HEIGHT ADJUST3 ZOOM Press ENTER to exit the Setup Guide screen. Image Projection Setup Guide screen • The Setup Guide screen automatically high- lights th...

27 Basic Operation 3 Adjusting the Height The height of the projector can be ad-justed using the adjustment feet at thefront and rear of the projector.When the screen is above the projec-tor, the projection image can be madehigher by adjusting the projector. 1 2 3 • Do not apply too much pressure on...

28 0 KEYSTONE ADJUST END Correcting TrapezoidalDistortion When the image is projected either fromthe top or from the bottom towards thescreen at an angle, the image becomesdistorted trapezoidally. The function forc o r r e c t i n g t r a p e z o i d a l d i s t o r t i o n i scalled Keystone Correc...

29 Basic Operation Displaying the Black Screenand Turning off the SoundTemporarily Adjusting the Volume Switching the Input Mode Press COMPUTER , DVI (XR-32X only) , S-VIDEO or VIDEO on the remote con- trol to select the input mode. • When you press INPUT on the projector or DVI on the remote contro...

30 Resize Mode This function allows you to modify or customize the resize mode to enhance the input image. De-pending on the input signal, you can choose a desired image. Press RESIZE . • See page 43 for setting on menu screen. RESIZEbutton COMPUTER For 4:3 screen For 16:9 screen Input signal 4:3 as...

31 Basic Operation VIDEO VIDEO/DTV * 1 * 1 * 1 * 1 * 1 * 1 * 1 * 1 * 2 * 2 4:3 aspect ratio Squeeze Letter box 16:9 aspect ratio 16:9 aspect ratio (4:3 aspect ratio in 16:9) For 4:3 screen For 16:9 screen Input signal Image type NORMAL Video/DTV 480 I , 480P, 576 I , 576P, NTSC, PAL, SECAM 720P, 103...

32 Operating with the Remote Control Displaying and Setting theBreak Timer Press BREAK TIMER . • The timer starts to count down from 5 minutes. 1 2 P r e s s P / R / O / Q t o a d j u s t t h e length of the break time. • Increases with P or Q 5 minutes s 6 minutes s 60 minutes • Shortens with O or ...

33 Useful Features Auto Sync(Auto Sync Adjustment) Freezing a Moving Image • When the optimum image cannot be achieved with Auto Sync adjustment, use the help menufor manual adjustments. (See page 48 .) Auto Sync function works when detect-ing input signal after the projector turnson.Press AUTO SYNC...

34 Using the Remote Control as the Wireless Computer Mouse When connecting the projector and the computer with a USB cable, you can usethe remote control as the computer mouse.If the computer is placed too far away from the projector to be connected via theUSB cable, the remote receiver (optional, A...

35 Useful Features The following shows the items that can be set in the projector. Menu Items Picture Mode Contrast 0 0 0 0 Bright Color Tint 0 Sharp Standard SEL./ADJ. ENTER END 0 0 Red Blue Picture SCR - ADJ PRJ - ADJ Help Picture Mode CLR Temp B r i g h t B o o s t C.M.S. Setting C.M.S. Standard ...

37 Useful Features SEL ENTER END There is no picture or audio Vertical stripes or flickering image appear Data image is not centered Color is faded or poor Picture is dark The image is distorted Reset all adjustments to default settings SEL. Picture SCR - ADJ PRJ - ADJ Help The items you can set wit...

41 Useful Features 2 2 2 2 2 Adjusting the Image *1 Not displayed in the RGB input mode.*2 Not adjustable/selectable when selecting “sRGB”. Q button For morecontrast.For morebrightness.For more colorintensity.For making skintones greenish.For moresharpness.For stronger red.For stronger blue.For maki...

42 5 5 5 5 5 Progressive • In NTSC or PAL60Hz, even if the 3D Progres- sive mode has been set, the three-two pulldown enhancement will be enabled automati-cally when the film source has been entered. • When the image is blurred or noisy, switch to the optimal mode. * The film source is a digital vid...

43 Useful Features Adjusting the Projected Image(“SCR - ADJ” Menu) SEL./ADJ. ENTER END Resize Image Shift 0 0 Keystone OSD Display Background Setup Guide PRJ Mode Language Front English On Logo On Border Picture SCR - ADJ PRJ - ADJ Help 8 7 6 4 3 2 1 5 1 1 1 1 1 Setting the Resize Mode • For details...

44 The projector can switch the on-screen displaylanguage among 17 languages. Selectable items Front Ceiling + Front Rear Ceiling + Rear Description Normal image (Projected fromthe front of the screen) Inverted image (Projectedfrom the front of the screenwith an inverted projector) Reversed image (P...

45 Useful Features SEL./ADJ. ENTER END Auto Power Off System Sound System Lock h On On Auto Restart On STANDBY Mode Standard 0 min 0 Lamp Timer(Life) 100% Speaker On Audio Input Audio 1 RS-232C 9600bps Fan Mode Normal Disable Auto Sync On Picture SCR - ADJ PRJ - ADJ Help 1234567890 Menu operation n ...

46 Adjusting the Projector Function (“PRJ - ADJ” Menu)(Continued) Info • If you lose or forget your keycode, contact y o u r n e a re s t S h a r p A u t h o r i z e d P r o j e c t o rDealer or Service Center (see page 65 ). Even if the product warranty is valid, the keycodereset will incur a char ...

47 Useful Features N o t e Input screen for keycode To cancel the keycode that you have alreadyset • Press R on the projector for four times in steps 4 and 5 above. When the System Lock is set • When System Lock is set, the keycode input screen appears after the power is turned on.When it appears, e...

48 Troubleshooting with the “Help” Menu Utilizing the “Help” MenuFunctions This function advises you to solve the problems during usage. • You can adjust the items with check marks ( ✔ ). • The items in the “Help” menu change, de- pending on the input signal or setting that youhave selected. • I f t...

49 Appendix Cleaning the lens ■ Use a commercially available blower or lenscleaning paper (for glasses and camera lenses)for cleaning the lens. Do not use any liquid typecleaning agents, as they may wear off thecoating film on the surface of the lens. ■ As the surface of the lens can easily getdamag...

50 Maintenance Indicators About the lamp indicator ■ When the remaining lamp life becomes 5% or less, (yellow) and “Change The Lamp” will bedisplayed on the screen. When the percentage becomes 0%, it will change to (red), the lamp will automatically turn off and then the projector will automatically...

52 Regarding the Lamp Lamp ■ It is recommended that the lamp (sold separately) be replaced when the remaining lamp life becomes5% or less, or when you notice a significant deterioration in the picture and color quality. The lamp life(percentage) can be checked with the on-screen display. (See page 4...

53 Appendix Removing and Installingthe Lamp Unit • Do not touch the glass surface of the lamp unit or the inside of the projector. • To avoid injury to yourself and damage to the lamp, make sure you carefully follow the stepsbelow. • Do not loosen other screws except for the lamp unit cover and lamp...

54 Remove the lamp unit. • Loosen the securing screws from the lamp unit. Hold the lamp unit and pull itin the direction of the arrow. At this time,keep the lamp unit horizontal and do nottilt it. Resetting the Lamp Timer Reset the lamp timer after replacing the lamp. Insert the new lamp unit. • Pre...

55 Appendix COMPUTER/COMPONENT input and COMPUTER/COMPONENT output Terminals : mini D- sub 15 pin female connector COMPUTER Input/Output Pin No. Signal 1. Video input (red) 2. Video input (green/sync on green) 3. Video input (blue) 4. Not connected 5. Not connected 6. Earth (red) 7. Earth (green/syn...

57 Appendix Info • When controlling the projector using RS-232C commands from a computer, wait for at least 30 seconds after the power has been turned on, and then transmit the commands. • After sending an input selection or picture adjustment command and then receiving an “OK” re- sponse code, the ...

58 Computer DVI NormalStretchDot By DotFullBorderArea ZoomV-StretchNormalStretchDot By DotFullBorderArea ZoomV-Stretch CONTROL CONTENTS Power ON Standby mode (or 30-second startup time) COMMAND PARAMETER RETURN Power Projector Condition Lamp Name Input Change Volume KeystoneAV Mute Freeze Auto SyncR...

62 Computer Computer Compatibility Chart • Multiple signal support Horizontal Frequency: 15-110 kHz,Vertical Frequency: 45-85 Hz, The following is a list of modes that conform to VESA. However, this projector supports othersignals that are not VESA standards. 27.031.537.527.031.537.927.031.527.031.5...

63 Appendix Problem Check • Projector power cord is not plugged into the wall outlet.• Power to the external connected devices is off.• The selected input mode is wrong.• Cables are incorrectly connected to the projector.• Remote control battery has run out.• External output has not been set when co...

65 Appendix For SHARP Assistance If you encounter any problems during setup or operation of this projector, firstrefer to the “Troubleshooting” section on pages 63 and 64 . If this operation manual does not answer your question, please contact the SHARP Service departmentslisted below. U.S.A. Sharp ...

66 Specifications As a par t of policy of continuous improvement, SHARP reserves the right to make design andspecification changes for product improvement without prior notice. The perfor mance specifica-tion figures indicated are nominal values of production units. There may be some deviations from...

67 Appendix Dimensions Units: inches (mm) 3 33 / 64 (89) 1 31 / 64 (37.65) 2 5 / 8 (66.35) 2 61 / 64 (75) 10 41 / 64 (270) 2 3 / 8 (60) 10 7 / 16 (265) 1 / 4 (6) 13 / 32 (10) M4 M4 M4 M4 4 7 / 64 (104) 1 15 / 16 (49) 13 / 32 (10) 13 / 32 (10) 1 3 / 16 (30) 2 61 / 64 (75) 1 27 / 64 (36)