Sharp XL-HF201PH(S) - Manuals

E-5 System connections (continued) You can connect a subwoofer with an amplifier to theSUBWOOFER PRE OUT socket. Notes: ● No sound is heard from the subwoofer without a built-inamplifier. ● Subwoofer Pre-out (audio signal): 200mV / 10k ohms at 70 Hz. Connect to the TV using an audio cable. To select...

E-6 General control Press the ON/STAND-BY button to turn the power on. To dim the display brightness, press the DEMO/DIMMERbutton on the remote control. If you turn off and on the main unit with the volume set to 27or higher, the volume starts at 16 and fades in to the last setlevel. Turn the volume...

E-7 Setting the clock (Remote control only) (continued) To confirm the time display: Press the CLOCK/TIMER button. The time display willappear for about 5 seconds. Note: When power supply is restored after unit is plugged in again or after a power failure, reset the clock (pages 6-7). To readjust th...

E-8 Listening to the iPod, iPhone or iPad (continued) Note: Docking station is not recommended for iPad connection. Adaptor for iPod and iPhone connectionNotes: ● Please use the adaptor supplied with your iPod or iPhone unit. ● You can use an audio cable to connect your iPod to the AUDIOIN socket if...

E-9 Listening to the iPod, iPhone or iPad (continued) Note: When navigating the iPod, iPhone or iPad menu with remotecontrol, do not operate any of the buttons on the iPod or iPhoneunit. The volume level is adjusted by pressing the VOL (+ or –)button on the main unit or the remote control. Adjusting...

E-11 Advanced CD or MP3/WMA disc playback (continued) The tracks on the disc can be played in random orderautomatically. To random play all tracks: Press RANDOM button on the remote control until “Random”appears. Press the / (CD/USB / ) button. To cancel random play: Press the RANDOM button again. “...

E-12 MP3/WMA folder mode (only for MP3/WMA files) To play back MP3/WMA (Windows Media Audio) file There are many music sites on the internet that you candownload MP3/WMA (Windows Media Audio) music files.Follow the instructions from the website on how todownload the music files. You can then play ba...

E-13 Listening to USB mass storage device/MP3 player Note: This product is not compatible with MTP and AAC filesystems from USB mass storage device or MP3 player. Note: To pause playback:Press the / (CD/USB / ) button. Notes: ● SHARP will not be held liable for the loss of data whilstthe USB memory ...

E-14 Advanced USB playback The following functions are the same as CDoperations: Page Direct track search . . . . . . . . . . . . . . . . . . . . . . . . . . . .10Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10Random play. . . . . . . . . . . . . . . . . . . . . . ....

E-16 Using the Radio Data System (RDS) (continued) Whilst in the ASPM operation mode, the tuner willautomatically search for new RDS stations. Up to 40stations can be stored.If you have already stored some stations in memory, thenumber of new stations you can store will be less. To stop the ASPM ope...

E-18 Timer and sleep operation (Remote control only) Timer playback: The unit turns on and plays the desired source (CD,TUNER, USB, iPod, AUDIO IN, LINE IN) at a preset time. This unit has 2 types of timer: ONCE TIMER and DAILYTIMER. Once timer: Once timer play works for one time only at a preset ti...

E-20 Enhancing your system The connection lead is not included. Purchase acommercially available lead as shown below. Note: To prevent noise interference, place the unit away from the television. ● Do not turn the volume on to full at switch on and listento music at moderate levels. Excessive sound ...

E-21 Troubleshooting chart (continued) Sudden temperature changes, storage or operation in anextremely humid environment may cause condensationinside the cabinet (CD pickup, etc.) or on the transmitter onthe remote control. Condensation can cause the unit tomalfunction. If this happens, leave the po...

E-22 Specifications As part of our policy of continuous improvement, SHARPreserves the right to make design and specificationchanges for product improvement without prior notice. Theperformance specification figures indicated are nominalvalues of production units. There may be some deviationsfrom th...