Sharp SX862- Manuals

10 Getting Started Getting Started 1 13 18 19 14 17 15 16 20 2 5 6 3 4 78 9 10 11 12 22 242526 23 21 29 3031 28 27

Getting Started 11 1. Earpiece2. Light Sensor3. Main Display4. Speaker5. Navigation Keys (Arrow Keys): abcd Moves cursor to highlight a menu item, etc.Up arrow key ( a ) displays the Bookmarks when pressed in standby.Down arrow key ( b ) displays the Phonebook entries when pressed in standby.Left ar...

12 Getting Started 13.Right Soft Key: C Executes the function in the lower right of the screen.Accesses “SmarTone iN! ” by opening the browser in standby. 14.End/Power Key: F Ends a call and turns power on/off. 15.Clear/Back Key: U Clears the characters before the cursor, returns to the previous scr...

Getting Started 13 27.Mobile Light: Used as an auxiliary light. 28.Battery Cover29.Camera30.Handsfree Kit/Microphone Connector31.Infrared Port: Sends and receives data via infrared.

14 Getting Started Inserting/Removing the SIM/USIM Card and the Battery 1. Slide off the battery cover ( ). 2. Slide the SIM/USIM card into the SIM/USIM holder . 3. Hold the battery so that the metal contacts of the battery are facing down, slide the guides on the top of the battery into the battery...

Getting Started 15 Charging the Battery You must charge the battery for at least 150 minutes before using your phone for the first time. Using the Charger 1. Open the cover of the external connector, and connect the charger horizontally to the external socket located at the bottom of the phone until...

16 Getting Started To Charge Using the Cigarette Lighter Charger The optional cigarette lighter charger supplies power for charging from the cigarette lighter socket of a car. Battery Level Indicator The current battery level is displayed in the upper right of the main and external displays. Low Bat...

Getting Started 17 3. Insert the memory card until it clicks. (To remove the memory card, push the memory card until it clicks.) 4. Close the cover. Tip • You see the following indicators when the memory card is in use: : Appears when the card is inserted.: Appears when the card is damaged or unusab...

18 Getting Started Turning Your Phone On and Off To turn the power on or off, long press F for approximately 2 seconds. To Enter the PIN Code If the PIN (Personal Identification Number) code is enabled you are asked to enter the PIN code each time the phone is switched on. For details on setting the...

Getting Started 19 Cycloid Position You can rotate the display 90 ° clockwise to view images in landscape orientation. Rotating the Display 1. Open the phone into portrait position as illustrated. 2. Turn the display 90 ° clockwise. Note • Do not turn the display anticlockwise as this may damage the...

22 Getting Started Display Indicators (External Display) Status Indicators 1. / / / : Battery level [sufficiently charged/charging recommended/charging required/empty] 2. : Clock 3. / : Strength of received signal/Service out of range 4. / : Missed events [message delivery failed/ missed calls] 5. :...

Navigating Functions 23 Navigating Functions All applications are accessed from the Main menu. To open the Main menu, press the centre key B in standby. To launch applications, you will need to highlight menu items, and make selections. To select a menu item (indicated in quotation marks), move the ...

24 Voice Call/Video Calling Functions Voice Call/Video Calling Functions Making a Voice Call 1. Enter the area code and the phone number you wish to dial, and then press D to dial. If you enter the wrong number, press U to delete the number to the left of the cursor. Emergency Calls 1. Enter 999 or ...

Voice Call/Video Calling Functions 25 Speed Dialling Up to 8 phone numbers from the Phonebook memory (Handset and SIM/USIM) can be assigned to speed dials. You can call the numbers using the digit keys ( G to O ). The phone number of the Voicemail centre is assigned to G . For details on setting the...

26 Voice Call/Video Calling Functions Rejecting an Incoming Call 1. Press F while the phone is ringing to reject a call you do not wish to answer. Letting the Caller Know You are Unavailable 1. Press [Busy] while the phone is ringing to send a busy tone to the caller. In Call Menu (Voice Call) Your ...

Voice Call/Video Calling Functions 27 Call Waiting This service notifies you of another incoming call while you have a call in progress. 1. During a call, press [Options] and select “Hold & Answer” to answer the second call. The first call is put on hold and you can now talk to the second caller...

28 Voice Call/Video Calling Functions To End the Call with a Conference Call Participant 1. During a conference call, highlight the person that you wish to disconnect from the conference call. 2. Press [Options] and select “End This Call”. To Have a Private Conversation with One of the Participants ...

Voice Call/Video Calling Functions 29 Answering a Video Calling When an incoming call is detected, the phone rings. 1. Press D to answer the call with video, or press B or [Options] and select “Hide Picture” to answer with voice only. Tip • If you have subscribed to the Calling Line Identification (...

30 Voice Call/Video Calling Functions Turning the Speaker On and Off You can talk via the loudspeaker on the phone when it is on. 1. During a video calling, press [Options] and select “Loudspeaker On”. Note • In a high-noise environment, you may not be able to continue a call or make a clear call. W...

Entering Characters 31 Entering Characters When entering characters to create Phonebook entries, text messages or multimedia messages, etc., press the corresponding keys.In multi-tap input method, press each key until the desired character is displayed. For example, press H once for the letter A or ...

32 Entering Characters Changing the Input Method 1. On the text entry screen, press [Options] and select “Input Method”. 2. Select the input method you wish to use. Tip • In T9 or multi-tap mode, you can switch input mode as follows by pressing P . English/T9 mode English/Multi-tap mode Traditional ...

Entering Characters 33 Simplified Chinese/T9 mode T9 English ModeUsing T9 English Mode T9 text input method is a shortcut to enter text easily and quickly. 1. On the text entry screen, press [Options]. 2. Select “Input Method”. 3. Select the T9 mode (T9 Abc, T9 ABC, T9 abc) you wish to change. “ ” i...

34 Entering Characters T9 PinYin and T9 Stroke Mode In T9 PinYin and T9 Stroke mode, keys are as follows. T9 PinYin and T9 Stroke Mode keys G - O : Long press to input corresponding Chinese character displayed in the candidate field. P : Long press to enter tones “ ” in T9 PinYin mode. R : Long pres...

Entering Characters 35 Using Stroke Mode (Traditional) The following is an example of entering “ ”. 1. Change the input mode to T9 Stroke mode. 2. Press IGJ to display the corresponding stroke for “ ”. 3. Long press the corresponding key to complete the selection (in this case, M ). Note • Each Trad...

Entering Characters 37 User Dictionary You can create your own word list for alphabet text and T9 Chinese input. English User Dictionary Note • This function is only available when “Input Language” is set to “English”. To Create a New Entry 1. On the text entry screen, press [Options] and select “Us...

38 Entering Characters To Edit a Word in the List 1. On the text entry screen, press [Options] and select “Chinese User Dictionary”. 2. Highlight the desired word. 3. Press [Options] and select “Edit”. 4. Modify the entry word. 5. Modify the acronym. To Delete a Word 1. On the text entry screen, pre...

40 Entering Characters Symbols and Punctuations 1. On the text entry screen, press [Options]. 2. Select “Add Symbol”. The first symbol page is displayed.In Chinese input mode, the FullWidth Symbols screen is displayed. 3. Press a or b to switch pages (HalfWidth Symbol and FullWidth Symbol pages), or...

Using the Menu 41 Using the Menu Main Menu 1. Press B in standby. The Main menu is displayed. 2. Press a , b , c or d to highlight the desired menu, then press B to access the function. For details on the menu options, see “List of Menu Functions” on page 8. Shortcut Keys You can access menus by pre...

42 Using the Menu Shortcuts Your phone has a shortcut function (press E in standby) which enables you to access the desired menu quickly. The default shortcuts are as follows (shortcuts assigned to G - O can be customised): • Main menu• Enter phone number• G : Phonebook • H : Create Message • I : Vo...

Call Manager 43 Call Manager You can store the phone numbers and Email addresses of your friends, family and colleagues in the Phonebook.Your phone can store up to 750 entries. For each entry, you can enter information including up to 5 phone numbers and 5 Email addresses. There is a limit to the nu...

44 Call Manager Searching for an Entry You can search for the desired entry by entering the first few letters of the name or by sorting the entries. Changing the List Displayed “Call Manager” → “Phonebook Settings” → “Source” 1. Select from “Handset”, “SIM” or “Both”. Finding a Name “Call Manager” →...

Call Manager 45 Dialling a Service Phone Number Certain SIM/USIM cards contain service phone numbers that can be dialled. Contact your SIM/USIM card vendor for more information. On the Phonebook screen, “Service Dialling No.” is displayed. “Call Manager” → “Service Dialling No.” 1. Select the desire...

46 Call Manager Tip • If you modify the entry assigned in the group, you need to re-assign it to the group. Select the entry, press [Options], then select “Re-assign Entry” in step 2. • To remove an entry from the group, select the entry, press [Options], then select “Remove Entry” in step 2. • To r...

Call Manager 47 Assigning a Ringtone or a Ring Video Clip to Each Entry “Call Manager” → “Phonebook” 1. Highlight the desired entry. 2. Press [Options] and select “Edit”. 3. Select “Tone/Video for Voice Call”, “Tone/Video for Video Calling” or “Tone/Video for New Message”. 4. Select “Assign Tone”. 5...

48 Call Manager Sending a Phonebook Entry “Call Manager” → “Phonebook” 1. Highlight the desired entry. 2. Press [Options] and select “Send Phonebook”. 3. Select “As Message”, “Via Bluetooth” or “Via Infrared”. For “As Message” For details, see “MMS” on page 64. For “Via Bluetooth” For details, see “...

Call Manager 49 Editing the Category Name You can edit category names to be assigned to the Phonebook entries. “Call Manager” → “Manage Groups” 1. Highlight the desired category name. 2. Press [Edit] and select “Edit Name”. 3. Modify the name. Speed Dial List You can set a maximum of 8 phone numbers...

50 Multimedia Multimedia FoneTV You can connect to the FoneTV service by selecting this menu. Note • To use FoneTV on your phone, you need to be in an area of 3G coverage and purchase a subscription package from your operator. www You can access the internet by selecting this menu to connect to the ...

Multimedia 51 Searching for a File to Be Played Back “Multimedia” → “Videos” → “My Videos” 1. Select “Handset Memory” or “Memory Card”. 2. Select “All Videos” or the desired playlist. 3. Enter a few letters of the title. Search results are displayed in alphabetical order and the matching file is hig...

52 Multimedia Settings You can select a play mode for “Playback Pattern”, “Backlight”, “Display Size” and “Sound Effects” when playing back video clip files. “Multimedia” → “Videos” → “Settings” 1. Select from “Playback Pattern”, “Backlight”, “Display Size” or “Sound Effects”. 2. Select from the fol...

Multimedia 53 Downloading Video Clip Files “Multimedia” → “Videos” → “Download Videos” The video clip file download site, SmarTone iN! , is displayed. Music Music player supports MP3, MPEG-4 and 3GPP format sound files. You can access other menus while listening to sound files. Creating a New Playli...

Multimedia 55 Searching for a File to Be Played Back “Multimedia” → “Music” → “My Music” 1. Select “All Music”, “Artists”, “Albums” or “Playlists”. 2. Enter a few letters of the title. Search results are displayed in alphabetical order and the matching file is highlighted. The search will match the ...

56 Camera Camera Your phone has a built-in digital camera that allows you to take pictures and record video clips wherever you are. This section starts with basic functions and operational procedures to take, save and send pictures and video clips, followed by common and unique functions to camera a...

Camera 57 Common Functions in the Photo and Video Camera Modes Using the Digital Zoom Function To Adjust the Zooming Ratio 1. Press a or b . Once the phone has returned to standby, the zoom settings return to default. Adjusting the Exposure “Camera” → [Options] → “Shooting Settings” → “Exposure”“Cam...

Camera 59 Common Shortcut Keys If multiple options exist, they switch each time you press each of the following keys. Note • The “Switches the display modes” option is available in “Preview” before you save a video clip. See “Recording Video Clips” on page 56. Functions in Photo Camera Mode Selectin...

60 Camera Continuous Shoot There are various modes for taking continuous shots. “Camera” → [Options] → “Modes” → “Continuous Shoot” 1. Select the desired mode. The following continuous shoot modes are available:“Off”: The continuous shoots are cancelled. “4 Pictures”/“9 Pictures” ( / ): Takes 4 or 9...

Camera 61 To Set the AE-Lock When this setting is enabled, the exposure setting is fixed for the same brightness level. “Camera” → [Options] → “Settings” → “Panorama Settings” → “AE-Lock” 1. Select “Enable” or “Disable”. Selecting the White Balance “Camera” → [Options] → “Shooting Settings” → “White...

62 Camera Selecting the Shutter Sound “Camera” → [Options] → “Settings” → “Shutter Sound” 1. Select the desired shutter sound from 3 preset patterns. To play back the shutter sound, press [Play] in step 1. Note • Continuous Shoot uses the specialised shutter sound that cannot be changed using the ab...

Camera 63 Recording Video Clips with Sound To record a video clip with sound, the microphone needs to be activated. “Camera” → [Options] → “Microphone” 1. Select “On” or “Off”. Note • The microphone is already turned on in the default setting. Select “Off” to record a video clip without the sound. •...

64 Messages Messages Your phone allows you to send and receive text messages, multimedia messages and Emails. It is compatible with most POP3 Email providers. SMS SMS allows you to send text messages up to 70 Chinese or 160 English characters in one SMS. If the number of characters in an SMS exceeds...

Messages 65 Creating a New Message (SMS/MMS)“Messages” → “Message” → “Create Message” (Email)“Messages” → “Email” → “Create Email” 1. Select the recipient field. 2. Select the desired method to enter the recipient’s details. 3. For MMS, enter or select the Email address or phone number from the Phon...

Messages 67 Using the Sending Options You can use the message sending options for each type of message. 1. Press [Options] and select “Messaging Settings”. • “Delivery Report” (“On”, “Off”) (SMS/MMS): Enables or disables Delivery Report when the message is successfully sent to the recipient. • “Expi...

68 Messages Sending a Message in the Drafts Box (SMS/MMS)“Messages” → “Message” → “Drafts” (Email)“Messages” → “Email” → “Drafts” 1. Highlight the desired message. 2. Press [Options] and select “Edit & Send”. 3. Modify the message, if necessary. 4. Press [Options] and select “Send”. “Send” is no...

Messages 69 Calling the Phone Number of a Sender Embedded in the Message (SMS/MMS)“Messages” → “Message” → “Inbox” (Email)“Messages” → “Email” → “Inbox” 1. Select a folder. 2. Highlight the message containing the phone number you wish to dial. 3. Press [Options] and select “Call Sender”. Downloading...

70 Messages Forwarding a Message (SMS/MMS)“Messages” → “Message” → “Inbox” (Email)“Messages” → “Email” → “Inbox” 1. Select a folder. 2. Highlight the message you wish to forward. 3. Press [Options] and select “Forward”. 4. Perform steps 1 to 6 in “Creating a New Message” on page 65. Sorting the Mess...

Messages 71 Setting Languages for Cell Broadcast Messages “Messages” → “Cell Broadcasts” → “Settings” → “Language” 1. Highlight the desired language and press B to check. 2. Press [Save]. Subscribing to Cell Broadcasts Select the page of the cell broadcast message that you want. “Messages” → “Cell B...

72 Messages Area Info The Area Info is the message information that operators send to subscribers in certain areas.When you receive Area Info, the message (area code) is displayed in standby. Enabling/Disabling Area Info “Messages” → “Area Info” 1. Select “On” or “Off”. Note • This function may not ...

Messages 73 • “Message Type”: Sets the type of message that can be created to either SMS or MMS. When set to “Free”, the message is sent automatically either as an SMS or MMS as appropriate. When set to “SMS”, the functions for MMS are not available. SMS Settings “Messages” → “Messaging Settings” → ...

74 Messages MMS Settings “Messages” → “Messaging Settings” → “MMS Settings” 1. Select the item you wish to set up. • “MMS Accounts”: Select the desired account or select “Create New” to enter the following settings.“Profile Name”: MMS profile name (unique name) “Proxy”: Proxy setting for MMS “Relay ...

Messages 75 • “Slide Auto Play”: Enables or disables Slide Auto Play. • “Send File Settings”: Sets whether or not to send and save the file settings. • “Max Message Size”: Sets the maximum message size for sending and disables sending MMS messages exceeding that size. • “Creation Mode”: When set to ...

76 Messages Email Settings “Messages” → “Messaging Settings” → “Email Settings” To Set an Email Account 1. Select “Email Accounts” and highlight the preset Email account. You can also create a new account. 2. Press [Options] and select “Edit”. 3. Select the item you wish to set up. “Account Name”: E...

Browser 77 Browser Your phone is already configured to access SmarTone iN! and the mobile Internet.SmarTone iN! is a mobile Internet portal which is your gateway to a new world of information, games, music and services.Because your phone uses 3G (UMTS), it has a system that is faster than previous w...

78 Browser Navigating a WAP or Web Page • a b c d : Moves the highlight around in the screen. • A : Launches the option menu if it has not been launched. Used to select an option from the option menu. • B : Executes the highlighted item in the screen. • C : Visits “SmarTone iN! ” by opening the brow...

Browser 79 (When a folder is highlighted)“Add New Bookmark”: Creates new bookmarks. “Create Folder”: Creates new folders. “Move”: Moves folder and bookmarks in the folder to another location. “Rename”: Renames the folder. “Delete”: Deletes the folder and bookmarks in the folder. “Delete All”: Delete...

80 Browser Browser Options when Online You can use the various options of the browser. C → [Options] “Home”: Goes to the homepage. “Alert Inbox”: Displays WAP Push alerts. “Forward”: Goes to the next page. “Open This Frame”: Opens the selected frame. (This option is available only when a frame page ...

Gallery 81 Gallery Gallery contains all your pictures, music and videos. You can also transmit pictures, sounds and video clips via infrared or Bluetooth wireless technology to other OBEX-enabled devices. Pictures Pictures that are taken by your cameraphone or images that are downloaded from mobile ...

82 Gallery Saving an Image to Phonebook Entries This option can only be used for pictures saved in the handset memory. “Gallery” → “Pictures” 1. Highlight the file you wish to add to Phonebook. 2. Press [Options] and select “Add to Contacts”. To save as a new entry, select “As New”.To overwrite, sel...

Gallery 83 Downloading Video Clip Files “Gallery” → “Videos” → “Download More” The video clip file download site, SmarTone iN! , is displayed. SD Videos Video clips with the “ASF” format that are recorded by a video camera can also be managed with SD Videos. “Gallery” → “SD Videos” 1. Select the des...

84 Gallery Themes You can easily customise the display by using the theme files. Viewing Previews “Gallery” → “Themes” 1. Highlight the theme file you wish to preview. 2. Press B . The selected theme file is displayed. Note • To switch between viewing handset or memory card content, select the first...

Gallery 85 Other Documents Some types of files are stored in the Other Documents folder of the phone. You can edit and use these files as Gallery data. Opening a Document File “Gallery” → “Other Documents” 1. Select the desired file. Note • To switch between viewing handset or memory card content, s...

86 Gallery Sending Gallery Data For details on Infrared and Bluetooth wireless technology, see “Connectivity” on page 138. 1. Select the appropriate folder for the desired file type (p. 85). 2. Highlight the desired file. 3. Press [Options] and select “Send”. 4. Select “As Message”, “As Email”, “Blu...

Gallery 87 Using Gallery Data You can copy, move, sort, rename, and delete the saved Gallery data. 1. Select the appropriate folder for the desired file type (p. 85). 2. Highlight the desired file. 3. Press [Options] and select “Manage Items”. 4. Select the desired option. “Sort”: Sorts files accord...

88 Gallery Selecting Multiple Files You can select more than one item from Gallery for moving, copying, managing and deleting. Note • The following procedure applies except when “Download More” is highlighted. 1. Select the appropriate folder for the desired file type (p. 85). 2. Highlight the file ...

90 Games & Applications Setting Permission You can set permission for selected Java™ applications. “Games & Applications” → “GSX ™ & Java ™ ” 1. Highlight the desired Java™ application. 2. Press [Options] and select “Permission”. 3. Select one of the following options: “Phone Call”: Sets...

Games & Applications 91 Viewing Application Information You can check the information of Java™ applications. “Games & Applications” → “GSX ™ & Java ™ ” 1. Highlight the desired Java™ application. 2. Press [Options] and select “Information”. Deleting an Application You can delete an appli...

92 Games & Applications To Set the Blinking Operation This setting enables the backlight to be controlled by the application. If set to “Off”, the backlight cannot be turned on from the application. “Games & Applications” → “Java ™ Settings” → “Backlight” → “Blink” 1. Select “On” or “Off”. V...

Games & Applications 93 Set Java™ Wallpaper You can set Java™ Wallpaper for the standby screen. To Switch the Java™ Wallpaper On or Off “Games & Applications” → “Java ™ Settings” → “Set Java ™ Wallpaper” → “Switch On/Off” 1. Select “On” or “Off”. To Set the Activation Time “Games & Appli...

94 Organiser Organiser Calendar The calendar allows you to easily schedule appointments.These entries can also be sent via Bluetooth wireless technology to a PC to share the same schedules. When you exchange entries with other devices, the date and time displayed may be different to that of the orig...

Organiser 95 Viewing a Schedule Entry “Organiser” → “Tools 1” tab → “Calendar” 1. Select the day you wish to view. 2. Select the desired entry. To Search by Date 1. In any view, press [Options] and select “Go to”. 2. Select “Today” to display today or “Enter Date” to enter the desired date. Tip • Yo...

96 Organiser For Days of the Week Colour “Organiser” → “Tools 1” tab → “Calendar” 1. Press [Options] and select “Calendar Settings”. 2. Select “Set Colour”. 3. Select “By Week” and then select days of the week you wish to colour. 4. Select the desired colour. Tip • The selected date/days are also hi...

Organiser 97 To Search by a Category “Organiser” → “Tools 1” tab → “Calendar” 1. In any view, press [Options] and select “Find”. 2. Select “By Category”. 3. Select a desired category. Search results are displayed in time order. Editing a Schedule Entry “Organiser” → “Tools 1” tab → “Calendar” 1. Sel...

98 Organiser Sending a Schedule Entry “Organiser” → “Tools 1” tab → “Calendar” 1. Select the day including schedule entries you wish to send. 2. Highlight the entry you wish to send, press [Options], then select “Send”. 3. Select “As Message”, “Via Bluetooth” or “Via Infrared”. For “Via Bluetooth” F...

Organiser 99 To Change the Settings 1. Select the item you wish to change in the Set Alarm screen. • “Subject”: Sets the subject for the alarm setting. • “Repeat”: Sets the number of times the alarm sounds. • “Assign Tone/Video”: Assigns a tone or video clip file to the alarm. • “Snooze”: Sets the s...

100 Organiser Tasks You can save your schedule as task entries for a given date or time. Creating a New Entry “Organiser” → “Tools 1” tab → “Tasks” 1. Select “Add New Entry”. 2. Enter the subject. 3. Enter the due date and time. 4. Press [Save]. Note • If the date and time settings have not been ent...

Organiser 101 To Set the Vibration “Organiser” → “Tools 1” tab → “Tasks” 1. Press [Options] and select “Alarm Settings”. 2. Select “Vibration”. 3. Select “On”, “Link to Sound” or “Off”. To Set for the Silent Mode You can set whether to sound the alarm when the profile is set to “Silent”. “Organiser”...

Organiser 103 Viewing the Memory Status “Organiser” → “Tools 1” tab → “Tasks” 1. Press [Options] and select “Memory Status”. Deleting Entries “Organiser” → “Tools 1” tab → “Tasks” → [Options] → “Delete” 1. Select the desired option. “This Task”: Deletes the selected entry. “All Completed Tasks”: Del...

104 Organiser Rate Conversion You can also use the calculator as a currency calculator to convert from/to a home currency using a conversion rate that you enter. To Set a Currency Conversion Rate “Organiser” → “Tools 1” tab → “Calculator” → [Options] → “Currency Converter” → “Exchange Rate” 1. Selec...

Organiser 105 To Change Amount 1. In the total view, highlight the desired item. 2. Press [Options] and select “Change Amount”. 3. Enter the desired amount using the digit keys. To Delete a Recorded Item or All Items 1. In the total view, highlight the desired item. 2. Press [Options] and select “De...

106 Organiser Countdown Timer “Organiser” → “Tools 2” tab → “Countdown Timer” 1. Enter the time to count. You can set the time from 1 second to 60 minutes. 2. Press [Start]. Press [Suspend] to pause the countdown.Press [Resume] to continue counting. 3. When the countdown has finished, press [Stop] a...

Organiser 107 Hour Minder Hour Minder function informs you of the time by sounding a tone. “Organiser” → “Tools 2” tab → “Hour Minder” 1. Select “Switch On/Off”. 2. Select “On” or “Off”. 3. Select “Select Time”. 4. Select the desired time. 5. Select “Save”. To Change the Settings “Organiser” → “Tool...

108 Organiser Text Templates You can register up to 60 text templates for use in text messages and multimedia messages. The maximum capacity of the text templates is 1,536 characters. Adding Phrases to Text Templates “Organiser” → “Tools 3” tab → “Text Templates” → “Add New Template” 1. Enter the te...

Organiser 109 Voice Recorder This allows you to record a voice clip, which can be used to remind you of schedule entries or be sent within a multimedia message. The recorded voice clip is saved in Music and Sounds. Voice clips are saved in .amr format. Recording a Voice Clip “Organiser” → “Tools 3” ...

110 SIM Application SIM Application You can refer to the information on the SIM/USIM card. Contact your service provider for further details. (M 10)

Settings 111 Settings Phone Settings Setting a Profile There are 4 profiles: “Normal”, “Car”, “Silent” and “Original”. Activating a Profile “Settings” → “Phone Settings” tab → “Profiles” 1. Select the desired profile. Note • When a profile is set, the corresponding indicator described on page 21 is ...

112 Settings Status Light You can set the Small Light to flash when you miss any incoming calls or new messages. “Settings” → “Phone Settings” tab → “Profiles” 1. Highlight “Car”, “Silent” or “Original”. 2. Press [Edit]. 3. Select “Status Light”. 4. Select the desired option. “For Missed Call”: Flas...

118 Settings Notification When receiving messages, Bluetooth notification or delivery reports, your phone will notify you of their arrival with the ringtone or ring video clip you specify. “Settings” → “Phone Settings” tab → “Sound Settings” → “Ringtone/Ringvideos” 1. Select “For New Message”, “Java...

124 Settings To Reset All Settings for M1 to M12 and Delete All Created Data “Settings” → “Phone Settings” tab → “Master Reset” → “Reset All” 1. Enter your handset code. For details on the handset code, see “Change Handset Code” on page 123. Call/Video Call Voicemail & Diverts This service can b...

136 Call Log Call Log The phone will record the last 30 missed calls, received calls and dialled numbers. Viewing Call Log “Call Log” 1. Select from “All Calls”, “Dialled Numbers”, “Missed Calls” or “Received Calls”. The selected call log list is displayed. To switch logs, press c or d . 2. Select t...

Call Log 137 Call Costs This function lets you check the charges for your calls. Some networks do not support Charging Advice. Please check with your service provider for availability. Checking the Cost of the Last Call “Call Log” → “Call Costs” → “Last Call” Checking the Total Call Cost “Call Log” ...

138 Connectivity Connectivity By configuring the settings in this menu, you can connect to Bluetooth wireless technology or infrared enabled phones, as well as PCs (USB connection is possible using Data Cable accessory). Bluetooth For using the Bluetooth wireless function, you need to search for oth...

140 Connectivity To Send All Data to Other Devices You can send all the data for applications such as Phonebook, Calendar, Tasks to selected devices. “Connectivity” → “Bluetooth” → “Send All” 1. Select the desired device. If a device is not specified, searching starts automatically. 2. Enter your ha...

142 Connectivity Infrared In order to use the Infrared function, you need to search for other infrared enabled devices to establish contact with your phone. Keep your phone within a distance of 20 centimetres before searching. The infrared setting will return to off when no data is transmitted/recei...

Connectivity 143 Card Settings Formatting Memory Card “Connectivity” → “Card Settings” → “Format Card” 1. Enter your handset code. For details on the handset code, see “Change Handset Code” on page 123. 2. Select “Yes” to start formatting. Making a Backup File With a memory card inserted in your pho...

144 Connecting SX862 to Your PC Connecting SX862 to Your PC (SX862 CD-ROM may be purchased separately.)You can use the following functions by connecting the SX862 to your PC using a USB data cable or via Bluetooth wireless technology:• 3G/GSM modem• Handset Manager for SX862• Music Manager for SX862...

Connecting SX862 to Your PC 145 4. Select the modem driver from the on-screen instructions of your CD-ROM, and install modem driver software following the on-screen instructions of your CD-ROM. 5. Follow the on-screen instructions to use your phone as a modem driver. • When the on-screen instruction...

146 Connecting SX862 to Your PC Handset Manager You can transmit the following items between your phone and your PC, and can use Phonebook entries on your PC:• Gallery files (pictures/sounds/video clips/themes/Flash ® files/Other Documents data) • Phonebook entries• Schedule entries Via USB Data Cab...

Connecting SX862 to Your PC 147 Via Bluetooth 1. Insert the CD-ROM into your PC’s CD-ROM drive. The SX862 CD-ROM screen is displayed.If the SX862 CD-ROM screen is not displayed, double-click [Launcher.exe] in your CD-ROM. 2. Select Handset Manager from the on-screen instructions of your CD-ROM, and ...

148 Connecting SX862 to Your PC Main Control Panel Control all the main actions from here. Play: Plays back a file. Previous: Returns to the top portion of the current file. Next: Jumps to the next file. Search Media File: Searches for a media file. Browse: Browses all the media files sorted in Genr...

Connecting SX862 to Your PC 149 • With the drag and drop operation, you can upload the sound files and the playlists from your PC, and also download them to your PC. • With the drag and drop operation, you can change the order of tracks in the playlist of your PC. • You can create a new playlist and...

150 Troubleshooting Troubleshooting Problem Solution The phone does not turn on. • Make sure the battery is properly inserted and charged. PIN code or PIN2 code is rejected. • Make sure you have entered the correct code (4 to 8 digits). • Your SIM/USIM card/protected functions will become locked aft...

152 Safety Precautions and Conditions of Use Safety Precautions and Conditions of Use Your phone conforms to international regulations insofar as it is used under normal conditions and in accordance with the following instructions. Conditions of Use Electromagnetic waves • Do not switch on your phon...

Safety Precautions and Conditions of Use 153 Mobile LightDo not use Mobile Light near people’s faces. Eyesight may be temporarily affected leading to accidents. CAUTION Use of controls, adjustments or performance of procedure other than those specified herein may result in hazardous radiation exposu...

154 Safety Precautions and Conditions of Use • Do not touch the battery terminals. Batteries can cause damage, injury or burns if a conductive material touches exposed terminals. When the battery is detached from the phone, use a cover made of non-conductive material for keeping and carrying the bat...

Safety Precautions and Conditions of Use 155 Camera Operation • Learn picture quality, file formats, etc. beforehand. The taken pictures can be saved in JPEG format. • Be careful not to move your hand while taking pictures. If the phone moves while taking a picture, the picture can become blurred. W...

156 Safety Precautions and Conditions of Use The manufacturer disclaims any liability for damage which may result as a consequence of improper use or use contrary to the instructions contained herein. SAR Your Sharp mobile phone has been designed, manufactured and tested so as not to exceed the limi...

Safety Precautions and Conditions of Use 157 SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determ...

158 Out of Warranty List Out of Warranty List This limited warranty shall not apply in respect of the following:(i) Any deterioration due to normal wear and tear including all plastic surfaces and all other externally exposed parts that are scratched or damaged due to normal customer use. (ii) Defec...

Index 159 Index A Alarms 98Area Info 72 B Battery 14, 153Bluetooth 138Browser 77 Browser Settings 79Navigating a WAP or Web Page 78 C Calculator 103Calendar 94Call Functions 24, 136 Auto Redial 131Call Costs 137Call Restrictions 128Call Timers 131, 136Call Waiting 27, 131Conference Call 27Data Count...