Sharp Projector Remote Control - Manuals

4.0 On SWITCHER (Console #1) [see Image below and Figure Bl Figure B CPUl CPU2 VCR1 VCR2 LDP1 PROJ1 PROJ2 PROJ1 PROJ2CPU CPU VIDEO VIDEOAudiooutput Power Control I/O Enter Preset View Esc RGBS Audio 4.1 Power should be ON (button lit). 4.2 Deselect all buttons under the labels CONTROL and I/O (light...

• PR0J2 CPU button is for the projector nearest the windows. **Both projectors can be chosen if both screens are being used for display. 4.7 Press ENTER button [on the right side of switcher under "Control" label]. 5.0 Projector Remote Control (Should be on classroom podium)Note: remote cont...

The following additional steps are necessary only if audio output is required (the speaker wire, which is attached to the cable kept on the podium, needs to connected to either the CPU1 or CPU2 wall plate from the workstation). Please Note: The volume knob on the PRIMARY CONTROL is for the ceiling s...

Using the Mitsubishi Portable Projector - Cheat Sheet Brief instructions on setting up and projecting using the Mitsubishi portable projector in any room 1.0 Setup 1.1 Connect computer's network cable and plug in its power cord. 1.2 Connect extension cables kept with workstation (if not already conn...

3.0 Remote Control Additional Features (Remote should be with the projector) Note: remote control does not work well with fluorescent lights on. 3.1 If you no longer need the projector, or if it will be turned off for more than 10 minutes, press the blue power button on the remote. This will turn of...

Setting up and Displaying the Mobile Workstations in Room 1 1 1 - Step-by-Step Instructions for using the Room 111 mounted projectors to display images and output sound from the Lab's PC and Mac mobile workstations. 0.0 Initial setup 0.1 Move computer into 111 with the following items on the cart or...

Figure A Power cord outlets Wall Jacks on south wall 0.3 Confirm that the network cable is connected securely from the back of the computer to either the 101D1 or 101D2 outlet. 0.4 Connect the extension cable attached to the cpu to the longer length of the split dark, gray cable, [see Figure B]. Fig...

Macintosh o o T Network connection Extension from cpu connects here (adapterneeded) 0.5 Connect the extension that is attached to the monitor cable to the shorter length of the split dark, gray cable. 0.6 Connect the other side of the split, dark gray cable to CPU1 or CPU2. 0.7 Once all cables are c...

computer, either PROJ1/CPU, PR0J2/CPU, or BOTH). If needed, you can also use the Switcher to output sound from a computer. Figure C Switcher CPUl CPU2 VCR1 VCR2 LDP1 Power Control I/O PROJ1 PROJ2 PROJ1 PROJ2CPU CPU VIDEO VIDEOAudiooutput Enter Preset View Esc RGBS Audio 3.1 Power should be ON (butto...

The following additional steps are necessary only if AUDIO OUTPUT is required. Please note that the speaker wire kept in the cart's black basketneeds to connected to either the CPU1 or CPU2 wall plate from the workstation's speaker port )) (green-colored port on PC). Please Note: The volume knob on ...

Setting Up and Displaying Mobile Workstations & Video Output Simultaneously in Room 111 Brief instructions for using the Room 111 mounted projectors to simultaneously display imagesfrom one of the Lab's mobile workstations, and from the room's VHS video recorder/player, the U-Matic video player,...

Using the P.A. System in Room 1 1 1 - Cheat Sheet Instructions for using the Room 111 public address system. 1.0 On PRIMARY CONTROL (Console # 1 ) 1.1 Select Power ON (button lit).1.2 Select P.A. SYSTEM ON (button lit). This button is also on the room's podium. Please Note: The volume knobs on the P...

Using The Sharp Portable Projector- Cheat Sheet Brief instructions for using the Sharp portable projector to display images from the Lab's PC andMac mobile workstations. 1.0 Setup 1.1 Connect computer's network cable and plug in its power cord. 1.2 Connect extension cables kept with workstation (if ...

Using Video Output in Room 111 - Cheat Sheet Brief instructions for using the Room 111 mounted projectors to display images and output soundfrom the room's VHS video recorder/player, the U-Matic video player, and the laserdisc player.For complete setup instructions, see Using Video Output in Room 11...

Using Video Output in Room 111 - Step-by-Step Instructions for using the Room 111 mounted projectors to display images and output sound from the room's VHS video recorder/player, the U-Matic video player, and the laserdisc player. 0.0 Initial setup 0.1 Look on the south wall (the wall with the white...

3.7 Press "ENTER" button [on the right side of switcher under "Control" label]. The following additional steps in Section 4 are necessary for audio output.The volume knob on the PRIMARY CONTROL is for the ceiling speakers.The volume knob on the RECEIVER is for the speakers on either ...